Improvement of the homogeneity of protein-imprinted polymer films by orientated immobilization of the template

A method for preparing homogeneous protein-imprinted polymer films with orientated immobilization of template is described. The template methyl parathion hydrolase (MPH) was modified with a peptide linker (Gly-Ser)₅–Cys and was immobilized on a cover glass with a fixed orientation via the linker. The activity of the fusion enzyme (MPH-L) was evaluated by determining the product's absorbance at 405 nm (A₄₀₅). Both the free and the immobilized MPH-L showed higher retention of the bioactivity than the wide type enzyme (MPH-W) as revealed by the A₄₀₅ values for MPH-L_free/MPH-W_free (1.159/1.111) and for MPH-L_immobilized/MPH-W_immobilized (0.348/0.118). The immobilized MPH-L also formed a more homogeneous template stamp compared to the immobilized MPH-W. The molecularly imprinted polymer films prepared with the immobilized MPH-L exhibited high homogeneity with low Std. Deviations of 80 and 200 from the CL intensity mean volumes which were observed for batch-prepared films and an individual film, respectively. MPH-L-imprinted polymer film also had a larger template binding capacity indicated by higher CL intensity mean volume of 3900 INT over 2500 INT for MPH-W-imprinted films. The imprinted film prepared with the orientated immobilization of template showed an imprinting factor of 1.7, while the controls did not show an imprinting effect.     

Electrochemical properties and the determination of nicotine at a multi-walled carbon nanotubes modified glassy carbon electrode

Electrochemical properties of nicotine at the glassy carbon electrode modified with multi-walled carbon nanotubes were explored. Nicotine underwent irreversible reduction at the modified electrode, which was an adsorption-controlled process with two protons and two electrons. The reductive peak current of nicotine significantly increased at the modified electrode compared with the bare glassy carbon electrode, suggesting that the multi-walled carbon nanotubes can enhance the electron transfer rate. The current was proportional to the concentration of nicotine over two line ranges, and the detection limit was 9.3 µM (at S/N?=?3). For ten parallel detections of 0.62 mM nicotine, the relative standard deviation was 2.67%, suggesting that the film modified electrode had excellent reproducibility. The modified electrode was applied to the direct determination of nicotine in tobacco samples with good sensitivity, selectivity and stability.     

para-Sulfonatocalix[6]arene-modified silver nanoparticles electrodeposited on glassy carbon electrode: Preparation and electrochemical sensing of methyl parathion

In this paper, a new electrochemical sensor, based on modified silver nanoparticles, was fabricated using one-step electrodeposition approach. The para-sulfonatocalix[6]arene-modified silver nanoparticles coated on glassy carbon electrode (pSC₆-Ag NPs/GCE) was characterized by attenuated total reflection IR spectroscopy (ATR-IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), etc. The pSC₆ as the host are highly efficient to capture organophosphates (OPs), which dramatically facilitates the enrichment of nitroaromatic OPs onto the electrochemical sensor surface. The combination of the host-guest supramolecular structure and the excellent electrochemical catalytic activities of the pSC₆-Ag NPs/GCE provides a fast, simple, and sensitive electrochemical method for detecting nitroaromatic OPs. In this work, methyl parathion (MP) was used as a nitroaromatic OP model for testing the proposed sensor. In comparison with Ag NPs-modified electrode, the cathodic peak current of MP was amplified significantly. Differential pulse voltammetry was used for the simultaneous determination of MP. Under optimum conditions, the current increased linearly with the increasing concentration of MP in the range of 0.01-80 μM, with a detection limit of 4.0 nM (S/N = 3). The fabrication reproducibility and stability of the sensor is better than that of enzyme-based electrodes. The possible underlying mechanism is discussed.     

Real-time tracking of hydrogen peroxide secreted by live cells using MnO2 nanoparticles intercalated layered doubled hydroxide nanohybrids

We report a facile and green method for the fabrication of new type of electrocatalysts based on MnO₂ nanoparticles incorporated on MgAl LDH P-type semiconductive channel and explore its practical applications as high-performance electrode materials for electrochemical biosensor. A series of MgAl layered doubled hydroxide (LDH) nanohybrids with fixed Mg/Al (M²⁺/M³⁺ atomic ratio of 3) and varied amount of MnCl₂.4H₂O are fabricated by a facile co-precipitation method. This approach demonstrates the combination of distinct properties including excellent intercalation features of LDH for entrapping nanoparticles and high loading of MnO₂ nanoparticles in the host layers of LDH. Among all samples, Mn5–MgAl with 0.04% loaded manganese has a good crystalline morphology. A well-dispersed MnO₂ nanoparticles encapsulated into the host matrix of hydrotalcite exhibit enhanced electrocatalytic activity towards the reduction of H₂O₂ as well as excellent stability, selectivity and reproducibility due to synergistic effect of good catalytic ability of MnO₂ and conductive MgAl LDH. Glass carbon electrode (GCE) modified with Mn5–MgAl possesses a wide linear range of 0.05–78 mM, lowest detection limit 5 μM (S/N = 3) and detection sensitivity of 0.9352 μAmM⁻¹. This outstanding performance enables it to be used for real-time tracking of H₂O₂ secreted by live HeLa cells. This work may provide new insight in clinical diagnosis, on-site environmental analysis and point of care testing devices.     

Design,Synthesis, and Herbicidal Evaluation of Novel Uracil Derivatives Containing 1,3,4‐Thiadiazolyl Moiety

Uracil derivatives, such as commercial herbicides butafenacil and benzfendizone, have been identified as inhibitors of protoporphyrinogen oxidase (Protox, EC 1.3.3.4), one of the most important action targets of herbicides. In order to search for novel Protox inhibitors with high efficacy, broad‐spectrum activity, and safety to crops, commercially herbicide butafenacil was used as lead compound for further optimization; a series of title compounds 8a , 8b , 8c , 8d , 8e , 8f , 8g , 8h , 8i , 8j , 8k , 8l , 8m , 8n were designed and synthesized by introducing 1,3,4‐thiadiazole moiety into the uracil skeleton. The preliminary bioassays (in vitro) indicated that most of the target compounds displayed better inhibition against Echinochloa crus‐galli than Brassica campestris. The greenhouse bioassay results indicated that most of the compounds tested exhibited good‐to‐excellent herbicidal activities against B. campestris, A. retroflexus, E. crusgalli, and D. sanguinalis in pre‐emergence treatment at a dose of 1500 g/ha, for example, compound 8d showed 100% inhibition against the four plants tested in pre‐emergence treatment at a dose of 1500 g/ha. So, these types of skeletons can be used as valuable lead compounds for the development of a pre‐emergent herbicide.     

Electrodeposition of PdAu Alloy Nanoparticles on Ionic Liquid Functionalized Graphene Film for the Voltammetric Determination of Oxalic Acid

An ionic liquid functionalized graphene film was prepared and PdAu nanoparticles (NPs) were electrodeposited on it. The PdAu NPs were characterized by various methods and they showed the features of alloys. In 0.2 M H₂SO₄ solution, oxalic acid (OA) exhibited a sensitive anodic peak at the resulting electrode at about 1.1 V (vs. SCE), and the peak current was linear to OA concentration in the range of 5–100 µM with a sensitivity of 45.5 µA/mM. The detection limit was 2.7 µM (S/N=3). The electrode was successfully applied to the determination of OA in real sample.     

Compressed matrix thin film (CMTF)-assisted laser desorption ionization mass spectrometric analysis

The inhomogeneous re-crystallization process of matrix materials is the major concerns associated with matrix assisted laser desorption/ionization (MALDI) analysis. We describe here the approach termed compressed matrix thin film (CMTF) in order to make a uniform matrix deposition. In this approach, solid matrix particles are compressed under 10 MPa of pressure by a compressor that is regularly used in infrared spectroscopic analysis. Then aqueous samples can be deposited on the surface of the matrix film. Major advantages of the CMTF approach are summarized as follows. (1) Reproducible sample preparation procedure. Size and thickness of matrix thin films can be controlled by using a fixed mold.force and known amount of matrix materials. (2) Significantly decreased shot-to-shot variations and enhanced reproducibility. (3) Tolerance for in situ salt washing. Because matrix materials are hydrophobic, salts can be washed away while proteins or peptides are retained on the surface of matrix thin films through hydrophobic interactions. (4) Improved sensitivity. The hydrophobic coating of MALDI sample plate by matrix thin films prevents the spreading of samples across the plate and confines analytes to a small area, leading to increased local concentration. (5) A new means for tissue analysis. Tissue sections can be directly transferred to the uniform surface of matrix materials for reproducible and quantitative comparison of different molecules in different localization. The proposed CMTF should be an enabling technique for mass spectrometric analysis with improved correlations between signal intensities and sample quantities.     

Study of Chiral Ionic Liquid as Stationary Phases for GC

Due to the synthetic flexibility and special enantioselectivity, chiral ionic liquids (CILs) have heightened interest and an increasing number of CILs has been designed and utilized. In this work, CIL named l-1-butyl-3-(2-propionic-1-ether) imidazolium bromide ([BAlaIM]Br) derived from natural amino acids was synthesized, with chiral center at cation moiety. Chiral stationary phases for gas chromatography were then prepared by mixing the CIL with polymeric ionic liquid ([PSOMIM][NTf₂], homemade) at different ratios (4:1, 2:1, and 1:1). The column efficiency was measured to be about 3,200 plates m^?1 (8 m × 0.25 mm i.d.) when the content of [BAlaIM]Br was 50 % (mass percent) in the mixed stationary phase. All columns were coated via the static coating method using 0.30 % (w/v) of stationary phases dissolved in methanol. The results showed that the CIL contributed to the selectivity of stationary phase toward positional isomers dichlorobenzenes, methylnaphthalenes and pinenes, etc. Meanwhile, [BAlaIM]Br showed better selectivity for enantiomers such as carvones, citronellals, limonenes and camphors. The interactions between chiral selector and enantiomers were also discussed.