Visual exploration of dependency graph in source code via embedding-based similarity

Journal of Visualization -  A large software system contains millions of lines of source code, and the development often involves many developers over a long period. How to understand and...     

The Effect of Metal‐Ligand Affinity on Fe3O4_Supported Co–Rh Catalysts for Dicyclopentadiene Hydroformylation

The catalytic performances of Co‐Rh/Fe₃O₄ catalysts modified with phosphine ligands (PPh₃) and its analogues on dicyclopentadiene hydroformylation were evaluated. Among these catalysts, Co‐Rh/Fe₃O₄ modified with tris(p‐trifluoromethylphenyl)phosphine was determined to be effective for monoformyltricyclodecanes production, whereas Co‐Rh/Fe₃O₄ modified with PPh₃ or tri‐p‐tolylphosphine was effective for the diformyltricyclodecanes production. To investigate the ligand effects, the complex catalyst system (Co‐Rh/Fe₃O₄ and phosphine ligand) was subjected to pretreatment with syngas and then characterized by thermogravimetry and differential thermal analysis (TG‐DTA). It was determined that the threshold decomposition temperature reflected the corresponding Rh‐phosphine interaction strength, affecting the catalytic selectivity toward different products. A weak Rh‐phosphine interaction was desirable to produce monoformyltricyclodecanes with fast reaction kinetics, whereas a strong Rh‐phosphine complex was required for the synthesis of diformyltricyclodecanes. In addition to the selectivity rule shown in the PPh₃ series, experiments with other ligands also demonstrated similar selectivity trends.     

新型混合脂肪基咪唑类衍生物的合成

以工业回收的精制地沟油、邻苯二胺、乙二胺及其衍生物为原料,经酰化-环化“一锅”反应合成了7种混合脂肪基咪唑类化合物（包括3种新化合物），其结构经UV-Vis, ¹H NMR, ¹³C NMR, IR和GC MS表征。     

AISI 4340钢干滑动摩擦磨损特性研究

室温条件下,采用CFT-Ⅰ型多功能材料表面综合性能测试仪对AISI 4340钢进行了往复干摩擦磨损试验,研究了其摩擦磨损特性.采用扫描电子显微镜(SEM)和能谱仪(EDS)对磨痕和亚表层进行了观察和检测,分析了磨损表面微观形貌、亚表层塑性变形和碳氧元素含量演化.结果表明:磨损形式以磨粒磨损为主,并伴随轻微黏着磨损和剥落磨损;磨损表面分布着长度、宽度、深度不一的划痕以及鳞片状和颗粒状磨屑;磨损表面出现轻微氧化,磨屑呈现不同程度的碳富集和氧化;亚表层出现明显摩擦影响层,距表层越近,塑性变形越明显,晶界角逐渐汇聚于表面,在表面处趋于平行;往复运动导致塑性变形方向不一致,磨痕中部,塑性变形向某位置聚集.     

三次Gauss和及二项指数和的混合均值

我们用三角和的性质研究一类三次Gauss和与两项指数和混合均值的计算问题,并给出一个精确的计算公式.     

Sasobit对SBS改性沥青性能的影响研究

为揭示温拌剂Sasobit对SBS改性沥青性能的影响,本文分别进行了不同温拌剂含量沥青的三大指标、布氏粘度、粘温扫描、动态剪切流变和低温弯曲流变等试验。结果表明:Sasobit使SBS沥青软化点降低,虽然其温度敏感性增大,但对针入度和延度影响不大。温拌沥青在105℃以上高温区粘度明显下降,这对施工有利;但随温度的降低,粘度却比原样提高,这对实际使用有利。依据三大指标和粘度试验结果,本文提出SBS沥青的Sasobit最佳掺量为3%。粘温扫描曲线显示,含Sasobit沥青粘度增大,特别是在75℃以下的温度区域,这对夏季抗车辙有利。此外,温拌剂Sasobit使SBS沥青的PG分级的高温等级提高,而对低温等级影响不大。     

基于模糊理论的汽轮机故障诊断

针对汽轮发电机组的单一故障诊断的局限性,对现有的故障进行分析和比较.根据振动信号的基本原理,应用了综合模糊诊断的方法对汽轮机的六种常见故障进行诊断.首先由不同故障在不同特征倍频的比例关系得到故障的模糊矩阵,分段对故障振动信号求隶属度,再与故障的模糊矩阵相乘即可求出各故障的隶属度,并用Minkowski距离公式计算隶属度距离大小,来判断诊断的准确性;最后提出模糊诊断的前景及存在的问题.