对称向量拟均衡问题有效解的存在性

利用标量化方法建立对称向量拟均衡问题有效解的存在性定理。作为标量化方法的应用，利用这一方法得到向量变分不等式和拟向量变分不等式有效解的存在性定理。     

新型功能碳材料的高压截获

高性能功能材料在诸多领域具有广泛的应用前景,是人们一直关注的研究热点。高压可以有效地改变物质的原子间距和成键方式,是获得新型功能材料的重要途径。在碳材料的高压研究中,许多有趣的功能碳材料,如光学透明碳、高强度弹性碳和超硬非晶碳等,已经通过不同的碳前驱体合成。本文简要介绍了作者近年来在低维碳基纳米复合材料高压研究中取得的进展,基于设计的不同低维碳前驱体,高压下截获了具有超硬特性、新型压致共价聚合及发光增强的碳材料。     

皮肤组织容积脉搏波400~1000 nm光谱特性仿真研究

根据皮肤组织解剖结构特性建立了六层层状模型,并给出了皮肤组织各层的特性参数;考虑了氧合血红蛋白和还原血红蛋白的吸收特性,依据皮肤组织各层的水、血、脂肪、血氧饱和度含量以及血管大小给出了皮肤组织各层的光谱吸收系数;对不同波长散射系数做了适当简化,给出了皮肤组织各层的光谱散射系数。利用蒙特卡罗方法仿真血管组织在收缩与舒张两种状态下, 400~1 000 nm波长光在皮肤组织多层模型中的传输过程,并通过统计大量光子的分布特性,获得了皮肤组织光谱反射系数,并利用模拟所得的两种状态下的反射系数计算得到了光谱容积脉搏波幅度。仿真结果表明,当入射光强一定时,绿光的容积脉搏波幅度优于红光和蓝光。通过计算不同波长光沿皮肤组织深度方向光能流率衰减为1/e时对应的皮肤组织深度,获得了皮肤组织光谱穿透深度。结果显示,血管舒张状态下蓝光和绿光的穿透深度较小,蓝光大部分只能达到表皮层,绿光能到达微循环层,红光可直达真皮层。考虑到光在皮肤组织中传播包含了一个从收缩到舒张的动态过程,基于此,根据穿透深度定义了脉搏波信号产生深度,利用血管舒张与收缩两种不同状态下的穿透深度计算得到了光谱产生深度。结果表明,不同波长光产生深度大于其穿透深度,蓝光产生深度较浅,且其受到的血液吸收调制较小,因而其获得的脉搏信号易受噪声干扰;红光的容积脉搏波产生深度较大,但是相比于绿光其受血液吸收调制较小,且绿光产生深度足够达到真皮血管层,因而红光容积脉搏波的幅度小于绿光。上述仿真结果明确了皮肤组织部分光谱特性,为皮肤组织多光谱容积脉搏波的精确获取及其他相关研究提供了一定的理论基础。     

Semiconductor SERS on Colourful Substrates with Fabry-Pérot Cavities

Non-metallic materials have emerged as a new family of active substrates for surface-enhanced Raman scattering (SERS), with unique advantages over their metal counterparts. However, owing to their inefficient interaction with the incident wavelength, the Raman enhancement achieved with non-metallic materials is considerably lower with respect to the metallic ones. Herein, we propose colourful semiconductor-based SERS substrates for the first time by utilizing a Fabry-Pérot cavity, which realize a large freedom in manipulating light. Owing to the delicate adjustment of the absorption in terms of both frequency and intensity, resonant absorption can be achieved with a variety of non-metal SERS substrates, with the sensitivity further enhanced by ≈100 times. As a typical example, by introducing a Fabry-Pérot-type substrate fabricated with SiO₂/Si, a rather low detection limit of 10⁻¹⁶ M for the SARS-CoV-2S protein is achieved on SnS₂. This study provides a realistic strategy for increasing SERS sensitivity when semiconductors are employed as SERS substrates.     

Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments ( 9-AGNR/cGNR ). The synthesis involves a controlled Suzuki–Miyaura catalyst-transfer polymerization (SCTP) between 2-(6′-bromo-4,4′′-ditetradecyl-[1,1′:2′,1′′-terphenyl]-3′-yl) boronic ester ( M1 ) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester ( M2 ), followed by the Scholl reaction of the obtained block copolymer ( poly-M1/M2 ) with controlled M_n (18 kDa) and narrow Đ (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).     

Solvothermal Syntheses,Crystal Structures,and Luminescent Properties of Two New Cadmium(II) Coordination Polymers Based on Rigid / Flexible Dicarboxylate and N,N′‐Bis(4‐pyridyl)‐1,4,5,8‐naphthalenetetracarboxydiimide

In order to investigate the effect of the organic ligands on the structures of coordination polymers, two new cadmium(II) coordination polymers based on the different dicarboxylate ligands, namely [Cd₂(bpdc)₂(DPNDI)₂] · 3H₂O · NMF ( 1 ) and [Cd(obb)(DPNDI)] ( 2 ) [H₂bpdc = biphenyl‐4,4′‐dicarboxylate, H₂obb = 4,4′‐oxybis(benzoic acid), DPNDI = N,N′‐bis(4‐pyridyl)‐1,4,5,8‐naphthalene tetracarboxydiimide, and NMF = N‐methylformamide), were synthesized under solvothermal condition and further characterized. Complex 1 shows a twofold interpenetrated pcu topology. Complex 2 possesses a two‐dimensional (2D) layer structure with –ABCD– stacking sequence. Furthermore, the luminescent properties of complexes 1 and 2 are investigated.     

预裂化理论研究:基质表面酸性位类型及不同类型酸性位接触顺序对裂化过程小分子烯烃收率的影响

在区分氢负离子转移反应与氢转移反应、非选择性氢转移反应与总的氢转移反应的情况下,通过合成物性相近但酸性不同的氧化铝,用以作为裂化催化剂基质材料,在固定床反应器上考察了催化裂化过程,基质酸性位类型及基质表面Lewis及Brönsted酸性位接触顺序对小分子烯烃(丙烯、丁烯)收率的影响。结果表明,催化裂化生成小分子烯烃过程中,分子筛与基质所呈现出的反应特点存在较大的区别,前者活性虽高,但总的氢转移反应活性过强。基质材料裂化活性虽低但其表面以氢负离子转移反应为主,反应路径角度更有利于小分子烯烃收率的提高。另外,基质表面存在Brönsted酸性位,或原料油首先与基质表面Lewis酸性位相接触再与Brönsted酸性位反应的预裂化过程,会在促进裂化反应发生的同时抑制总的氢转移反应,更有利于小分子烯烃收率的提高。     

Hydrogen dangling bonds induce ferromagnetism in two-dimensional metal-free graphitic-C3N4 nanosheets

Ferromagnetic two-dimensional (2D) ultrathin nanosheets hold great promise for next generation electronics. Ferromagnetic metal-free materials that usually possess only an s/p electronic configuration with weak spin–orbit coupling and a large spin relaxation time, would play an important role in constructing future spintronic devices. However, the absence of an intrinsic spin ordering structure in most metal-free materials greatly hampers the widening scope of ferromagnetic 2D nanostructures as well as in-depth understanding of their ferromagnetic nature. Herein, the induction of intrinsic ferromagnetism in 2D metal-free g-C₃N₄ ultrathin nanosheets has been achieved through a new effective strategy whereby hydrogen dangling bonds are introduced. In our case, g-C₃N₄ ultrathin nanosheets with hydrogen dangling bonds showed obvious room temperature ferromagnetic behavior that could even be tuned by the concentration of hydrogen. This work will pave a new pathway to engineer the properties of 2D nanomaterial systems.     

K8[Fe(H2O)W11MnO39]/PANI/V2O5三元复合材料的制备、表征及光催化性能研究

本文运用静电自组装法合成了一种新型三元复合材料K₈[Fe(H₂O)W₁₁MnO₃₉]/PANI/V₂O₅,并采用IR、UV、XRD、XPS、SEM、氮气吸附等方法对其进行表征;然后,以龙胆紫为有机污染物进行光催化实验,对此三元复合催化剂的降解性能进行研究。结果表明:K₈[Fe(H₂O)W₁₁MnO₃₉]/PANI/V₂O₅已被成功复合,且仍然保持Keggin结构,稳定性能良好;在pH=2,龙胆紫C初=5 mg·L^-1,此催化剂用量为5 mg的条件下,其脱色率高达93.09%。可见,此复合催化剂具有优异的研究潜力和实用价值。     

Revealing the Cell Entry Dynamic Mechanism of Single Rabies Virus Particle

The rabies virus is a neurotropic virus that causes fatal diseases in humans and animals. Although studying the interactions between a single rabies virus and the cell membrane is necessary for understanding the pathogenesis, the internalization dynamic mechanism of single rabies virus in living cells remains largely elusive. Here, we utilized a novel force tracing technique based on atomic force microscopy(AFM) to record the process of single viral entry into host cell. We revealed that the force of the rabies virus internalization distributed at (65±25) pN, and the time was identified by two peaks with spacings of (237.2±59.1) and (790.3±134.4) ms with the corresponding speed of 0.12 and 0.04 μm/s, respectively. Our results provide insight into the effects of viral shape during the endocytosis process. This report will be meaningful for understanding the dynamic mechanism of rabies virus early infection.