Hybrid Isothermal Model for the Ferrohydrodynamic Chemically Reactive Species

A hybrid isothermal model for the homogeneous-heterogeneous reactions in ferrohydrodynamic boundary layer flow is established. The characteristics of Newtonian heating and magnetic dipole in a ferrofluid due to a stretchable surface is analyzed for three chemical species. It is presumed that the isothermal cubic autocatalator kinetic gives the homogeneous reaction and the first order kinetics gives the heterogeneous (surface) reaction. The analysis is carried out for equal diffusion coefficients of all autocatalyst and reactions. Heat flux is examined by incorporating Fourier's law of heat conduction. Characteristics of materialized parameters on the magneto-thermomechanical coupling in the flow of a chemically reactive species are investigated. Further, the heat transfer rate and friction drag are depicted for the ferrohydrodynamic chemically reactive species. It is evident that the Schmidt number has increasing behavior on the rate of heat transfer in the boundary layer. Comparison with available results for specific cases is found an excellent agreement.     

Hybrid cross‐linked hydrogels as a technology platform for in vitro release of cephradine

Hydrogel‐based drug delivery systems can leverage therapeutically favorable upshots of drug release and found clinical uses. Hydrogels offer temporal and spatial control over the release of different therapeutic agents. Because of their tailor made controllable degradability, physical properties, and ability to prevent the labile drugs from degradation, hydrogels provide platform on which diverse physicochemical interactions with entrapped drugs cause to control drug release. Herein, we report the fabrication of novel vinyltrimethoxy silane (VTMS) cross‐linked chitosan/polyvinyl pyrrolidone hydrogels. Swelling in distilled water in conjunction with different buffer and electrolyte solutions was performed to assess the swellability of hydrogels. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analysis were further conducted to investigate the possible interactions between components, thermal stability, and crystallinity of as‐prepared hybrid hydrogels, respectively. In vitro time‐dependent biodegradability, antimicrobial study, and cytotoxicity were also carried out to evaluate their extensive biocompatibility and cytotoxic behavior. More interestingly, in vitro drug release study allowed for the controlled release of cephradine. Therefore, this facile strategy developed the novel biocompatible and biodegradable hybrid hydrogels, which could significantly expand the scope of these hydrogels in other biomedical applications like scaffolds, skin regeneration, tissue engineering, etc.     

Nanosecond Pulse Generation with Silver Nanoparticle Saturable Absorber

Nanosecond pulse generation in an erbium-doped fiber laser (EDFL) passively mode-locked by a silver nanoparticle(SNP)-based saturable absorber(SA) is experimentally demonstrated. The SA is fabricated by depositing a nanosized SNP layer onto the surface of polyvinyl alcohol film through the thermal evaporation process. By inserting the SA into an EDFL cavity, stable mode-locked operation is achieved at 1561.5 nm with the maximum pulse energy up to 52.3 nJ. The laser operates at a pulse repetition frequency of 1.0 MHz with a pulse width of 202 ns. These results suggest that SNPs could be developed as an effective SA for mode-locking pulse generation.     

Development of Yttrium and Iron Oxide Thin Films via AACVD Method for Photooxidation of Water

Russian Journal of Applied Chemistry - Owing to high stability, metal oxide-based ceramic thin films are of great interest for photocatalytic oxidation of water. Therefore, the current research is...     

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Journal of Solid State Electrochemistry - Protonic ceramic fuel cells have become extremely interesting due to their high power output at the intermediate temperature range...     

Effects of binary chemical reaction and Arrhenius activation energy in Darcy–Forchheimer three-dimensional flow of nanofluid subject to rotating frame

Darcy–Forchheimer three-dimensional rotating flow of nanoliquid in the presence of activation energy and heat generation/absorption is examined. Heat and mass transport via convective process is considered. Buongiorno model has been employed to illustrate thermophoresis and Brownian diffusion effects. Adequate transformation procedure gives rise to system in terms of nonlinear ODE’s. An efficient numerical technique namely NDsolve is used to tackle the governing nonlinear system. The graphical illustrations examine the outcomes of various sundry variables. Heat and mass transfer rates are also computed and examined. Our results indicate that the temperature and concentration distributions are enhanced for larger values of porosity parameter and Forchheimer number.

     

Fabrication of magnetite nanoparticles (Fe3O4-NPs) for catalytic pyrolysis of nutshells biomass

The fabrication of nanoparticles has been perused as a topic of critical importance in the present decades. Biosynthesis of nanoparticles employs plants extract instead of harmful chemicals. These plant extracts act as reducing and capping agents which is the most appropriate and eco-friendly method among all the preparative routs. In present study, the magnetite nanoparticles (Fe₃O₄-NPs) were fabricated using rapid, single step and benign biosynthetic rout by reduction of ferric nitrate nonahydrate solution with Ferocactus echidne aqueous extract containing ascorbic acid as a main reducing and capping agent. The structural and morphological properties of prepared iron oxide nanoparticles were investigated by Powder X-ray diffraction and scanning electron microscopy. The size of the synthesized nanoparticles was approximately 15 ± 2 nm as determined by Scherrer equation. The biosynthetically fabricated nanoparticles were employed as catalyst for pyrolysis of nutshells to produce biofuel. Catalytic pyrolysis of biomass yields biofuel as an alternative source of energy and chemical feed stock. Effect of temperature, heating rate, and amount of catalyst were investigated on conversion percentage and product yields. Aniline point, carbon residue, and cetane number of prepared bio-oil were also determined.     

Organometallic assembling of chitosan‐Iron oxide nanoparticles with their antifungal evaluation against Rhizopus oryzae

The ever‐increasing resistance of plant microbes towards fungicides and bactericides has been causing serious threat to plant production in recent years. For the development of an effective antifungal agent, we introduce a novel hydrothermal protocol for synthesis of chitosan iron oxide nanoparticles (CH‐Fe₂O₃ NPs) using acetate buffer of low pH 5.0 for intermolecular interaction of Fe₂O₃ NPs and CH. The composite structure and elemental elucidation were carried out by using X‐ray power diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X‐ray (EDX), Transmission Electron Microscopy (TEM), Fourier Transformed Infrared Spectroscopy (FTIR) and Ultraviolet Visible Absorption Spectroscopy (UV–vis spectroscopy). Additionally, antifungal activity was evaluated both In vitro and In vivo against Rhizopus oryzae which is causing fruit rot disease of strawberry. We compared different concentrations (0.25%, 0.50%, 075% and 1%) of CH‐Fe₂O₃ NPs and 50% synthetic fungicide (Matalyxal Mancozab) to figure out suitable concentration for application in the field. XRD analysis showed a high crystalline nature of the NPs with average size of 52 nanometer (nm). SEM images revealed spherical shape with size range of 50–70 nm, whereas, TEM also revealed spherical shape, size ranging from 0 nm to 80 nm. EDX and FTIR results revealed presence of CH on surface of Fe₂O₃ NPs. The band gap measurement showed peak 317–318 nm for bare Fe₂O₃ NPs and CH‐Fe₂O₃ NPs respectively. Antifungal activity in both In vitro and In vivo significantly increased with increase in concentration. The overall results revealed high synergetic antifungal potential of organometallic CH‐Fe₂O₃ NPs against Rhizopus oryzae and suggest the use of CH‐Fe₂O₃ NPs against other Phyto‐pathological diseases due to biodegradable nature.     

Polyphenolic profiling of Ipomoea carnea Jacq. by HPLC-DAD and its implications in oxidative stress and cancer

Ipomoea carnea Jacq. is an important folklore medicinal plant, assessed for its underexplored biological potential. Antioxidant, cytotoxic, antiproliferative and polyphenolic profile of whole plant was evaluated using various techniques. Maximum extract recovery (29% w/w), phenolic [13.54 ± 0.27 μg GAE/mg dry weight (DW)] and flavonoid (2.11 ± 0.10 μg QE /mg DW) content were recorded in methanol-distilled water (1:1) flower extract. HPLC-DAD analysis quantified substantial amount of six different polyphenols ranging from 0.081 to 37.95 μg/mg extract. Maximum total antioxidant and reducing potential were documented in methanol-distilled water and acetone-distilled water flower extracts (42.62 ± 0.47 and 24.38 ± 0.39 μg AAE/mg DW) respectively. Ethanol-chloroform root extract manifested highest free radical scavenging (IC₅₀ of 61.22 μg/mL) while 94.64% of the extracts showed cytotoxicity against brine shrimps. Ethanol leaf extract exhibited remarkable activity against THP-1 cell line (IC₅₀ = 8 ± 0.05 μg/mL) and protein kinases (31 mm phenotype bald zone).