Purification of transferrin by magnetic immunoaffinity beads

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti‐transferrin (Anti‐Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe₃O₄nanopowder and obtained with an average size of 2.0 μm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm³ and 52%, respectively. Anti‐Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti‐Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption–desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.     

Polymer-attractive spherical cage system

We analyze the structural behavior of a single polymer chain inside an attractive sphere. Our model is composed of a coarse-grained polymer governed by Lennard-Jones interactions of the monomers and an attractive sphere potential which follows by integrating the monomer-monomer interaction over the (inner) surface of the sphere. By means of extensive multicanonical Monte Carlo simulations it is shown that the system exhibits a rich phase diagram in the adsorption strength-temperature (ε ? T) plane ranging from highly ordered and compact to extended and random coil structures and from desorbed to partially or even completely adsorbed conformations. These findings are identified with different energetic and structural observables. The resulting phase diagram in the ε ? T plane is compared with that for a polymer adsorbing to a plane, attractive substrate obtained previously by Möddel, Bachmann, and one of the authors.     

Nafion-graphene composite film modified glassy carbon electrode for voltammetric determination of p-aminophenol

A Nafion-graphene (Nafion-GR) nanocomposite film modified glassy carbon electrode was fabricated by a simple drop-casting method, and used in the electrochemical detection of p-aminophenol (4-AP). Owing to the large surface area, good conductivity of GR and good affinity of Nafion, the sensor exhibited excellent electrocatalytic activity for the oxidation of 4-AP. The electrochemical behaviors of 4-AP on Nafion/GR film modified glassy carbon electrodes were investigated by cyclic voltammetry and differential pulse voltammetry. A calibration curve is constructed in the same matrix, urine, as the unknown samples to be analyzed. The Nafion-GR film modified electrode was linearly dependent on the 4-AP concentration and the linear analytical curve was obtained in the ranges of 0.5–200 μM with differential pulse voltammetry (DPV) and the detection limit was 0.051 μM. The Nafion-graphene nanocomposite modified electrode exhibited good reusability than pure graphene modified GCE. This procedure can be used for the determination of p-aminophenol in the presence of its degradation products and paracetamol. Finally, the proposed method was successfully used to determine p-aminophenol in local tap water samples in urine samples and pharmaceutical preparations.     

Amperometric biosensors based on deposition of gold and platinum nanoparticles on polyvinylferrocene modified electrode for xanthine detection

In this study, new xanthine biosensors, XO/Au/PVF/Pt and XO/Pt/PVF/Pt, based on electroless deposition of gold(Au) and platinum(Pt) nanoparticles on polyvinylferrocene(PVF) coated Pt electrode for detection of xanthine were presented. The amperometric responses of the enzyme electrodes were measured at the constant potential, which was due to the electrooxidation of enzymatically produced H₂O₂. Compared with XO/PVF/Pt electrode, XO/Au/PVF/Pt and XO/Pt/PVF/Pt exhibited excellent electrocatalytic activity towards the oxidation of the analyte. Effect of Au and Pt nanoparticles was investigated by monitoring the response currents at the different deposition times and the different concentrations of KAuCl₄ and PtBr₂. Under the optimal conditions, the calibration curves of XO/Au/PVF/Pt and XO/Pt/PVF/Pt were obtained over the range of 2.5 × 10^?3 to 0.56 mM and 2.0 × 10^?3 to 0.66 mM, respectively. The detection limits were 7.5 × 10^?4 mM for XO/Au/PVF/Pt and 6.0 × 10^?4 mM for XO/Pt/PVF/Pt. The effects of interferents, the operational and the storage stabilities of the biosensors and the applicabilities of the proposed biosensors to the drug samples analysis were also evaluated.     

Comparison of the Parallel Tempering Algorithm and Multicanonical Method as Applied to Coarse-Grained Off-lattice Models for Folding Heteropolymers

We have performed Parallel Tempering simulations of hydrophobic-hydrophilic heteropolymers with a simple effective, coarse-grained off-lattice model with the selected monomers and compare the global energy minimums found with Parallel Tempering algorithm with the lowest energy states identified within the multicanonical algorithm.     

Nonextensive Statistical Mechanics Application to Vibrational Dynamics of Protein Folding

The vibrational dynamics of protein folding is analyzed in the framework of Tsallis statistics. We employ exact expressions for classical harmonic oscillators by considering the unnormalized constraints. As q→1, we show that these approximations agree with the result of Gaussian network model.     

Thermal characterization of Er-doped and Er–Gd co-doped ceria-based electrolyte materials for SOFC

Ce_1?xEr_xO₂ and Ce_1?2xEr_xGd_xO₂ co-doped ceria electrolyte nanopowder materials were successfully prepared by sol–gel method. Depending on the temperature, the crystal structure changes were analyzed by X-ray diffraction. It was observed that the crystal size of the electrolytes decreased depending on the temperature and the time. X-ray diffraction results confirmed cubic fluorite structure in the samples. The microstructural properties of the samples were analyzed by scanning electron microscopy, and thermal stability measurement was performed by thermogravimetric and differential thermal analyses. The total electrical conductivity of the nanopowder electrolytes was determined by the dc four-point probe technique in air at temperatures ranging from room temperature to 1373 K. The four-probe conductivity results revealed that Ce_0.8Er_0.1Gd_0.1O₂ has a higher ionic conductivity compared to Ce_0.83Er_0.17O₂ at 1123 K. The four-probe conductivity results show that both Ce_1?xEr_xO₂ and Ce_1?2xEr_xGd_xO₂ solid electrolytes have potential application to oxide ionic conductor for solid oxide fuel cells.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].