双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

A general framework for describing photofission observables of actinides at an average excitation energy below 30 MeV

A reasonable prediction of photofission observables plays a paramount role in understanding the photofission process and guiding various photofission-induced applications, such as short-lived isotope production, nuclear waste disposal, and nuclear safeguards. However, the available experimental data for photofission observables are limited, and the existing models and programs have mainly been developed for neutron-induced fission processes. In this study, a general framework is proposed for characterizing the photofission observables of actinides, including the mass yield distributions (MYD) and isobaric charge distributions (ICD) of fission fragments and the multiplicity and energy distributions of prompt neutrons (n_p) and prompt γ rays (γ_p). The framework encompasses various systematic neutron models and empirical models considering the Bohr hypothesis and does not rely on the experimental data as input. These models are then validated individually against experimental data at an average excitation energy below 30 MeV, which shows the reliability and robustness of the general framework. Finally, we employ this framework to predict the characteristics of photofission fragments and the emissions of prompt particles for typical actinides including ²³²Th, ^{235, 238}U and ²⁴⁰Pu. It is found that the ²³⁸U(γ, f) reaction is more suitable for producing neutron-rich nuclei compared to the ²³²Th(γ, f) reaction. In addition, the average multiplicity number of both n_p and γ_p increases with the average excitation energy.     

黄绿色葡萄石的矿物学特征及谱学研究

葡萄石可以以板状、片状、葡萄状、肾状、放射状或块状集合体的形式产出,因其美丽的外观和特殊的晶体结构,近年来受到了学者的广泛关注。本文通过电子探针、粉晶X射线衍射仪、傅里叶变换红外光谱仪、显微拉曼光谱仪、紫外可见分光光度计等仪器对黄绿色葡萄石的成分、结构及谱学特征进行了分析与探讨。葡萄石的主要致色元素为Fe,且Fe³⁺经常取代Al³⁺占据八面体配位,Fe²⁺经常取代Ca²⁺存在于空隙中。电子探针数据表明:Fe与Al的含量变化整体呈现负相关关系,Fe与Ca的含量变化也整体呈现负相关关系,Fe含量相对较高的样品其黄绿色调加深。XRD图谱和拉曼光谱的结果表明:在葡萄石中绿帘石以包裹体的形式存在。红外光谱和拉曼光谱表明葡萄石中存在硅氧四面体和铝氧八面体两种架构,紫外可见吸收光谱揭示了葡萄石的致色机理。本文对葡萄石的矿物学特征及谱学特征进行系统分析,为后续葡萄石的进一步研究提供思路与实验数据。     

Record-high near-band-edge optical nonlinearities and two-level model correction of poled polymers by spectroscopic electromodulation and ellipsometry

The determination of nonlinearities near the band edge of organic and polymeric electro-optic(EO)materials is important from the viewpoint of molecular nonlinear optics(NLO)and photonic device applications.Based on transmission-mode Stark effect electromodulation(EM)spectroscopy,we study the electric-field-induced changes in optical absorption and refraction of newly developed EO polymers from the visible to near-infrared(NIR)wavelengths and report record-high near-band-edge complex EO effects from poled thin films.Values ofΔn andΔk up to 10^-3 and 10^-2 are found at an applied electric field of 2.0×10⁵-3.0×10⁵V/cm.The study of linear optical properties of poled films by spectroscopic ellipsometry shows large polinginduced birefringence and a nearly two-fold increase in the extinction coefficients at the extraordinary polarization.Through the Kramers-Kronig analysis,we obtained the real and imaginary second-order nonlinear coefficients up to~3,500 and~5,600 pm/V,respectively,which are believed to be the highest NLO coefficients of poled polymers through the resonance enhancement.Our approach goes beyond the previous works,applicable only to several discrete wavelengths,to a full-spectral analysis with independent verification of slab waveguide measurements.By considering both the electroabsorption and electrorefraction effects,our study overcomes the limitation of the classic qualitative two-level model and provides a quantitative understanding of near-resonance optical nonlinearities of organic EO materials.It can inspire the exploration of high-speed,absorptive,or phase-shifting light-modulators using EO polymers for on-chip applications.     

吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

The designing strategies of graphene-based peroxidase mimetic materials

Natural enzymes have been praised highly as ideal catalysts, presumably owing to their remarkable advantages of high efficiency, high selectivity, and mild reaction conditions. The reports of chemical simulation and systematic synthesis of natural enzymes such as peroxidase (POD) are rare because of their complex biological structures. POD represents a large family of oxidoreductases and offers a wide range of applications in many fields of science. Recent advance in the fusion of nanomaterial, catalysis, and biochemistry has inspired the development of artificial enzymes implemented with desired catalytic features of natural enzymes. Herein, we review the redox chemistry of POD and compare its catalytic performance to graphene-based nanomaterials (G-NMs) as POD mimetic nanoenzymes bases on catalytic center, binding site, and carrier function. Based on the viewpoints of stereo chemistry and molecular kinetic and dynamics in heterogeneous system, we evaluate and compare the suitability of different NMs as artificial enzyme constituent. We propose that reevaluates design strategies of graphene-based peroxidase (G-POD) mimetic materials and emphasizes on their selectivity (role as catalytic center, binding site, or carrier) is of uttermost.     

炭吸附纳米氧化铋的制备及其光催化性能

以粗氧化铋和浓硝酸为原料,采用炭吸附共沉淀法制备氧化铋(Bi2 O3)纳米粉体.通过热重分析仪(TG-DTA)、X射线衍射仪(XRD)、紫外-可见分光光度计(UV-Vis)、透射电子显微镜(TEM)对得到的粉体的焙烧温度、物相、光吸收性能及微粒尺寸进行表征.结果显示:活性炭的加入有效阻止了纳米氧化铋在制备、干燥以及焙烧过程的团聚和烧结;在500℃煅烧制备的Bi2 O3粉体结晶度高、颗粒分布均匀,平均晶粒尺寸为10.8 nm,比表面积为86.43 m2·g-1;加入活性炭煅烧得到的Bi2 O3粉体在可见光区域吸收性能明显增强,对可见光有更好的吸收性能.评价纳米Bi2O3光催化活性是利用可见光光催化降解甲基橙(MO)目标污染物,60 min内甲基橙降解率达到91.77;.