Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Experimental assessment of heat transfer and pressure drop of nanofluid as a coolant in corrugated channels

Journal of Thermal Analysis and Calorimetry - Over the last few decades, tremendous consideration is drawn towards corrugation surfaces because of their advantages over the improvement in thermal...     

A generalized technique for the encapsulation of nano‐sized NiO particles by styrene‐2‐hydroxyethyl methacrylate copolymer

Encapsulation of nickel oxide (NiO) particles is of great interest to the researchers as such modification produces remarkable improvement in properties and versatility in application potential. In this investigation, nanosized NiO particles were first prepared by calcination of nickel hydroxide precursor obtained using a simple liquid‐phase process. The produced NiO particles were stabilized with oleic acid and then treated with tetraethylorthosilicate to produce NiO/SiO₂ composite seed particles. Finally tri‐layered inorganic/organic composite particles were prepared by seeded copolymerization of styrene and 2‐hydroxyethyl methacrylate (HEMA) in the presence of NiO/SiO₂ composite seed particles. The produced composite particles named as NiO/SiO₂/P(S‐HEMA) were colloidally stable, and the obtained particles were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and thermogravimetric analyses. Copyright © 2015 John Wiley & Sons, Ltd.     

Me2Zn‐Mediated Catalytic Enantio‐ and Diastereoselective Addition of TosMIC to Ketones

The first catalytic asymmetric addition of TosMIC to unactivated ketones is presented. A combination of Me₂Zn and aminoalcohol catalyst promoted the aldol addition/cyclization reaction to render oxazolines possessing a fully substituted stereocenter with excellent yields (up to 92 %), high enantioselectivities (up to 96 %), and complete diastereoselectivity. The chiral oxazolines were then used to give, after a straightforward acid hydrolysis, enantioenriched building blocks bearing tertiary alcohol motifs such as hydroxylaldehydes, hydroxylacids, and hydroxylesters without racemization.     

Analysis of a “3-(Naphthalen-1-ylimino)indolin-2-one” Compound and Its Antimicrobial Assessment Using Lipid-Based Self-Nanoemulsifying Formulations

In recent years, indole derivatives have acquired conspicuous significance due to their wide spectrum of biological activities—antibacterial, antiviral, and anticonvulsant. This compound is derived from naturally grown plants. Therefore, synthesis of a novel “3-(Naphthalen-1-ylimino)indolin-2-one” compound (2) and its analysis using UPLC systems along with antimicrobial assessment was the aim of the current study. Isatin was used as a parent drug for synthesizing compound (2). Liquid Chromatographic analysis was performed using a C18 BEH column (1.7 μm 2.1 × 50 mm) by UPLC systems. Degradation studies were carried out to see whether acid, base, thermal, and oxidizing agents had any impact on the synthesized molecule in stress conditions (100 °C). A lipid-based self-nanoemulsifying formulation was developed and selectivity, specificity, recovery, accuracy, and precision were measured as part of the UPLC system’s validation process. Antimicrobial studies were conducted using gram-positive and gram-negative bacteria. The standard samples were run with a concentration range of 5.0–100.0 μg/mL using the isocratic mobile phase comprising of methanol/water (70/30 %v/v) at 234 nm; good linearity (R² = 0.9998) was found. The lower limits of detection (LOD) and quantitation (LOQ) of the method were found to be 0.81 μg/mL and 2.5 μg/mL, respectively. The coefficients of variation were found to be less than 2%. The antimicrobial study suggests that compound (2) has a substantial growth effect against gram-negative bacteria. It was successfully synthesized and applied to measure the concentrations in lipid-based dosage form, along with potent antimicrobial activities.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

Redox behavior of juglone in buffered aq.: Ethanol media

The present work reports the redox mechanism of 5-hydroxynaphthalene-1,4-dione (HND), commonly known as juglone, in buffered aqueous media having 50% of ethanol. HND followed different mechanistic routes depending upon the pH of the media and more than one pK_a were evaluated from the changes in the slope of the E_p vs. pH plot. The change of pH from acidic to neutral conditions was found to switch the mechanism from CEC to EE mechanism. Pulse techniques were utilized to determine the number of electrons involved in the oxidation and/or the reduction step and to ensure the nature of the redox process. Based upon the obtained results, an electrode reaction mechanism was proposed. Computational studies of HND supported the experimental results. UV-Visible spectroscopy was also employed for the detailed characterization of the compound in a wide range of pH and for the determination of its pK_a.     

The radiation shielding offered by the commercial glass installed in Bangladeshi dwellings

One sign of a vibrant Bangladeshi economy has been the move away from the use of more traditional housing materials towards a preference for modern constructional media. Glass, one such example, used both decoratively and in a structural context, offers various advantageous properties and facets including a protective feature against radiation that has not previously been considered. Current interest examines the dosimetric possibilities offered by the commercial glass as a secondary shield and also in retrospective ionising radiation exposure analysis. Four popular brands of window glass are investigated, all available within the local market (PHP-Bangladesh, Usmania-Bangladesh, Nasir-Bangladesh and Rider-China), all with the same thickness and colour, varying in terms of elemental weight fractions as evaluated by energy dispersive X-ray analysis. As potential attenuators of transmitted radiation thereby forming secondary barriers against radiation exposure from penetrating radiations, the four brands of glass have been studied using photon energies from 59 up to 1332 keV, a range of values representative of that potentially encountered in incidents. Use has been made of a well-shielded high-purity germanium γ-ray spectrometer and associated electronics, providing for evaluation of the characteristic barrier parameters of half-value layer, radiation protection efficiency and effective atomic number (Z_eff). Of the four brands investigated, Rider provides superior secondary shielding performance. Concerning potential retrospective dosimetry the effective atomic number of the glass samples are comparable with that of the commercial thermoluminescence (TL) dosimeter TLD-200. At high doses, the TL yields are sufficient to provide for retrospective accident dosimetry.