Coupling characteristics of laterally coupled gratings with slots

Laterally-coupled ridge-waveguide distributed feedback lasers fabricated without epitaxial regrowth steps have the advantages of process simplification and low cost. We present a laterally coupled grating with slots. The slots etched between the ridge and grating area are designed to suppress the lateral diffusion of carriers and to reduce the influence of the aspect-ratio-dependent-etching effect on the grating morphology in the etching process. Moreover, the grating height in this structure can be decreased to lower the aspect ratio significantly, which is advantageous over the conventional laterally coupled ridge waveguide gratings. The effects of five main structural parameters on the coupling characteristics of gratings are studied by MODE Solutions. It is found that varying the lateral width of the grating can be used as an effective way to tune the coupling strength; narrow slots (100 nm and 300 nm) and wide ridge (2 μm-4 μm) promote the stability of grating coupling coefficient and device performance. It is important to note that the grating bottom should be fabricated precisely. The comparative study of carrier distribution and mode field distribution shows that the introduction of narrow slots can strengthen the competitive advantage and stability of the fundamental mode.     

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd^3+-doped silica fiber

Nd3+-doped fiber lasers at around 900 nm based on the 4F3/2→4I9/2 transition have obtained much research attention since they can be used as the laser sources for generating pure blue fiber lasers through the frequency doubling.Here,an all-fiber laser at 915 nm was realized by polarization-maintaining Nd3+-doped silica fiber.A net gain per unit length of up to 1.0 dB/cm at 915 nm was obtained from a 4.5 cm fiber,which to our best knowledge is the highest gain coefficient reported in this kind of silica fiber.The optical-to-optical conversion efficiency varies with the active fiber length and the reflectivity of the output fiber Bragg grating(FBG),presenting an optimal value of 5.3%at 5.1 cm fiber length and 70%reflectivity of the low reflection FBG.Additionally,the linear distributed Bragg reflector short cavity was constructed to explore its potential in realizing single-frequency 915 nm fiber laser.The measurement result of longitudinal-mode properties shows it is still multi-longitudinal mode laser operation with 40 mm laser cavity.These results indicate that the Nd3+-doped silica fiber could be used to realize all-fiber laser at 915 nm,which presents potential to be the seed source of high-power fiber laser.     

拉伸载荷作用下单边缺陷-边裂纹应力强度因子研究

利用杂交位移不连续法研究拉伸载荷作用下矩形板中单边缺陷-边裂纹(半圆孔裂纹和半方孔裂纹)问题,给出了这三种平面弹性裂纹问题的应力强度因子的详细数值解。通过半圆孔裂纹问题和半方孔裂纹问题与单边裂纹问题的应力强度因子的比较,发现半圆孔和半方孔对单边裂纹有屏蔽影响。此外,本文的研究结果表明,杂交位移不连续法用于分析平面弹性有限体中复杂裂纹问题的应力强度因子简单且又准确。     

Simultaneous measurement of SO2 and NO2 concentration using an optical fiber-based LP-DOAS system

SO2 and NO2 are the most important pollution in atmosphere.An optimized long path(LP)differential optical absorption spectroscopy(DOAS)system of high light intensity at an ultraviolet(UV)wavelength is proposed and used to measure the concentration of SO2 and NO2 simultaneously.In contrast to the traditional DOAS,the system adopted a Y-type optical fiber structure instead of a combination of mirrors in the telescope.The UV light intensity test shows that the light intensity of UV can arrive to above 80% of the max measuring range when the light path reaches 135 m,and the integral time of the spectrograph is only 15 ms.The system is proved to be efficacious through laboratory calibration.The maximum error of SO2 calibration is 4.19%,and is 5.22% for NO2.The error of the SO2 and NO2 mixture calibration is within 10%.Field measurement is implemented in a wastewater treatment plant in winter.The measurement light path is 738 m.The concentration of SO2 varies from 6μg/m^3(2.26 ppb)to 20μg/m^3(7.52 ppb),and the concentration of NO2varies from 100μg/m^3(53.2 ppb)to 200μg/m^3(106.4 ppb)approximately.The results are in accordance with the data from a monitoring station nearby in magnitude order and variation tendency mostly.     

纳米羟基磷灰石的合成方法研究进展

羟基磷灰石(Hydroxyapatite,HAP)是一种重要的生物、医药、重金属污染土壤/水体修复材料,本文总结了HAP的结构、组成、发展历程及应用,并从干法、湿法两个大方面系统总结了羟基磷灰石的合成方法及各种方法的优劣,对HAP合成方法的改进方向及应用前景进行了展望.     

基于LSTM的浮选钼精矿品位软测量模型

战略性稀有金属钼矿品位低,组分复杂、嵌布粒度细等特点,其有价金属分离回收难。浮选作为微细粒钼矿分离回收的主要选矿方法之一,其浮选钼精矿品位一直是选厂的关键性产品指标。国内大多数选厂采取轮班制采样,人工化验得到精矿品位结果,但此方式严重滞后于浮选工艺,难以满足对生产过程进行实时监测和操作指导。LSTM是一种特殊的循环神经网络,引入门机制有效的传递或选择性遗忘长时间序列中的信息,解决RNN中的长期依赖、梯度消失和爆炸问题。本文分析整理东坡选厂中各平台源数据,结合选厂浮选工艺及机理,筛选出多个影响浮选钼精矿品位的变量作为模型输入;将输入变量进行异常值判定,缺失值填充和数据降噪等数据预处理,建立高质量浮选钼精矿品位数据库;软测量模型采用PyCharm软件编码,使用BatchNorm批量规范化处理样本数据,加入Dropout正则化防止过拟合,建立基于LSTM的浮选钼精矿品位软测量模型,通过前向传播算法更新神经网络结构参数,并于Linear模型和CNN模型的预测性能指标结果比较。结果表明：基于LSTM的浮选钼精矿品位软测量模型预测准确度高,样本数据误差波动平稳,浮动范围小,模型泛化能力强,模型平均绝对百分比误差MAPE为1.13%,均方根误差RMSE为0.7049%,决定系数R2为0.8763,实现了浮选钼精矿品位的在线预测。     

高可见光催化降解污染物和产氢活性的Z型N-掺杂K4Nb6O17/g-C3N4异质结

随着人口增长和全球工业化进程加快,人们饱受环境污染和能源短缺问题的困扰.半导体光催化技术作为一种高效、可持续、环境友好、有潜力的新技术,在环境净化和能源开发方面有着广阔的应用前景.到目前为止,人们已开发出多种半导体光催化剂,并广泛应用于污染物降解、氢气制备和二氧化碳还原等领域.其中,化合物K4Nb6O17具有典型的层状结构、合适的电子能带结构、结构易改性以及良好的电荷传输性能等特点,在光催化领域得到了广泛研究.然而,单纯K4Nb6O17仍存在光响应范围窄、光生载流子复合率高等问题,限制了K4Nb6O17的进一步应用.因此,需要对K4Nb6O17进行改性,拓宽其光吸收范围,提高其光生载流子分离效率,从而提高其光催化活性.本研究通过简单焙烧法制备Z型N-掺杂K4Nb6O17/g-C3N4(KCN)异质结光催化剂,其中石墨相氮化碳(g-C3N4)在复合材料中质量比约为50%.层状K4Nb6O17层板的电子结构通过N掺杂进行调控,拓宽其光响应范围,使其具有可见光响应;同时,形成的g-C3N4位于N-掺杂K4Nb6O17的外层以及内层空间,在这两种组分之间形成异质结,有利于提高光生载流子的分离效率.荧光光谱、时间分辨荧光光谱和光电化学测试表明,N掺杂和异质结的形成有利于增强光生电子-空穴对的传输和分离效率.通过在可见光照射下降解罗丹明B(RhB)和产氢来评估材料的光催化性能.相比g-C3N4(8.24μmol/h)和Me-K4Nb6O17(~1.30μmol/h),KCN复合材料光催化产氢效率(~16.91μmol/h)得到了极大提高,并显示出极好的光催化产氢稳定性能.对于光催化降解RhB体系,KCN复合材料也显示出较好的光催化活性和稳定性,并能很好地将RhB矿化.鉴于KCN复合材料具有较小的比表面积(9.9 m^2/g)且无孔结构,认为比表面积对光催化活性影响较小.因此,与单组分相比,KCN复合材料光催化产氢和RhB降解活性都得到了极大提高,活性的增强主要归功于N掺杂和异质结形成的协同效应,其中N掺杂可以拓宽光捕获能力,异质结形成可提高电荷载流子的分离效率.电子自旋共振(ESR)谱表明,在KCN降解RhB体系中,超氧自由基(·O2^?)、羟基自由基(·OH)和空穴(h^+)作为主要活性物质都参与了反应.结合实验结果可以推测KCN复合材料满足了Z型光催化体系,该体系具有高效的光生载流子分离效率和较高的氧化还原能力.     

双功能化磁性纳米修复剂对多重金属的快速、高效钝化行为

采用“一锅法”制备了四氧化三铁/半胱氨酸（Fe₃O₄/Cys）磁性纳米微球,随后对Fe₃O₄/Cys进行亚氨基二乙酸（IDA）修饰得到Fe₃O₄/Cys/IDA磁性双功能化纳米微球。研究发现Fe₃O₄/Cys中的L-Cys是通过—SH基团接枝到Fe₃O₄表面的,随后IDA分子中的羧基与Fe₃O₄/Cys中的—NH₂形成酰胺键,最终形成多支链多羧基的Fe₃O₄/Cys/IDA磁性纳米修复剂。基于修复剂表面短支链-长支链交替的多羧基结构,实现了羧基基团的高密度接枝。同时,Fe₃O₄/Cys/IDA磁性纳米微球对Pb²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺为专性吸附,而对Hg²⁺属于非专性吸附,且吸附重金属后得到的钝化产物均表现了良好的稳定性。另外,Fe₃O₄/Cys/IDA对重金属离子的吸附符合Langmuir模型,属于单层均相吸附,其吸附过程符合准二级动力学模型,最大吸附量为49.05 mg·g^-1。     

轴向移动系统的参数振动问题研究进展

对近二十年来轴向移动系统(移动弦，移动梁和移动带等)的参数振动研究进展进行了详细的评述，特别关注了轴向张紧力和移动速度随时间改变时轴向移动系统的参数振动特性和稳定性等问题。文章首先讨论了所研究问题的控制方程。然后详细说明了目前研究中人们较为关注的几个重点问题，如参数激励的形式，求解方法和所研究的问题等。接着在其后的两节中，分别评述了在张紧力和移动速度随时间变化时，轴向移动弦和轴向移动梁的振动问题近年来的研究进展，详细、深入讨论了模型的类型、张紧力和轴向移动速度随时间变化的形式以及在研究中使用的解题方法和系统的振动特性(振动响应、固有频率和动态稳定性)等；最后给出了在此领域今后研究中应关注的问题。     

沟槽型硅微结构中子探测器的蒙特卡罗模拟研究

采用蒙特卡罗模拟方法研究了微结构参数、填充致密度等因素对沟槽型微结构半导体中子探测器(MSND)性能的影响规律,并开展了沟槽型MSND的优化设计研究。研究表明,随着沟槽间距的增加,MSND的探测效率呈下降趋势;当沟槽间距固定时,存在最优的沟槽宽度使得探测效率最大化;沟槽深度越大,探测效率越高。沟槽宽度和沟槽间距为15μm和5μm是一对优化的参数组合,可保证较高的探测效率和较平稳的系统甄别阈-探测效率曲线。当系统甄别阈取300keV时,沟槽宽度、间距和深度分别为15,5μm和200μm时的MSND热中子本征探测效率可达37.77%,与平面探测器相比提高了9.2倍;对137 Cs源662keV伽马射线的中子-伽马射线甄别比可达4.1×103,与平面探测器相比提高了23.7倍。本工作从理论上证明了MSND可解决传统平面型半导体中子探测器探测效率低的难题,同时可保持半导体探测器中子-伽马射线甄别容易的特点。