INVESTIGATION OF THE DYNAMIC BEHAVIOR OF TWO COLLINEAR ANTI-PLANE SHEAR CRACKS IN A PIEZOELECTRIC LAYER BONDED TO TWO HALF SPACES BY A NEW METOHD

IntroductionItiswell_knownthatpiezoelectricmaterialsproduceanelectricfieldwhendeformedandundergodeformationwhensubjectedtoanelectricfield .Thecouplingnatureofpiezoelectricmaterialshasattractedwideapplicationsinelectro_mechanicalandelectricdevices,suchaselectro_mechanicalactuators,sensorsandstructures.Whensubjectedtomechanicalandelectricalloadsinservice,thesepiezoelectricmaterialscanfailprematurelyduetodefects,e .g .,cracks,holds,etc.arisingduringtheirmanufactureprocess.Therefore,itisofgreatimp…     

压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题

分析了压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题。利用傅立叶变换,使问题的求解转换为对一对以裂纹表面上的位移差为未知变量的对偶积分方程的求解。为了求解对偶积分方程,把裂纹面上的位移差展开为雅可比多项式形式,进而得到了裂纹长度、入射波波速及入射波频率对裂纹应力强度因子的影响。从数值结果可以看出,压电压磁复合材料中可导通裂纹的反平面问题的动应力奇异性与一般弹性材料中的反平面断裂问题动应力奇异性相同。     

尖端具有吸附性接触的界面裂纹对瞬态弹性波作用下的动态响应

建立并研究一类接触型界面裂纹模型对瞬态弹性波作用下的动态响应问题。文中利用积分变换和积分方程法推导了确定这类问题的奇异积分方程组。采用围道积分技术和切比雪夫多项式展开技术，得到了待定系数的非线性代数方程组。最后给出了裂纹尖端接触区大小和接触应力随时间变化的数值结果，揭示了这种接触裂纹的动力学特性及物理上的合理性。     

尖端具有线性粘着力作用的加层空间的界面裂纹对稳态弹性波的散射

本文研究一类粘着型界面裂纹的弹性波散射问题．文中利用积分变换和积分方程方法推导了确定这类问题的奇异积分方程组．采用围道积分技术和切比雪夫多项式展开技术，得到了待定系数的非线性代数方程组．最后本文给出裂纹尖端粘着区的大小和界面应力的数值结果．     

INVESTIGATION OF BEHAVIOR OF MODE-I INTERFACE CRACK IN PIEZOELECTRIC MATERIALS BY USING SCHMIDT METHOD

The behavior of a Mode-Ⅰinterface crack in piezoelectric materials was investigated under the assumptions that the effect of the crack surface overlapping very near the crack tips was negligible. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. To solve the dual integral equations, the jumps of the displacements across the crack surfaces were expanded in a series of Jacobi polynomials. It is found that the stress and the electric displacement singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials. The solution of the present paper can be returned to the exact solution when the upper half plane material is the same as the lower half plane material.     

INVESTIGATION OF THE BEHAVIOR OF A GRIFFITH CRACK AT THE INTERFACE BETWEEN TWO DISSIMILAR ORTHOTROPIC ELASTIC HALF-PLANES FOR THE OPENING CRACK MODE

The behaviors of an interface crack between dissimilar orthotropic elastic halfplanes subjected to uniform tension was reworked by use of the Schmidt method. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, of which the unknown variables are the jumps of the displacements across the crack surfaces. Numerical examples are provided for the stress intensity factors of the cracks. Contrary to the previous solution of the interface crack, it is found that the stress singularity of the present interface crack solution is of the same nature as that for the ordinary crack in homogeneous materials. When the materials from the two half planes are the same, an exact solution can be otained.     

条状功能梯度材料中偏心裂纹对反平面简谐波的散射问题

利用Sehmidt方法研究了条状功能梯度材料中偏心裂纹对反平面简谐波的散射问题，裂纹垂直于条状功能梯度材料的边界．通过Fourier变换，问题可以转换为对一对未知变量是裂纹表面位移差的对偶积分方程求解．为了求解对偶积分方程，把裂纹表面的位移差展开为Jacobi多项式级数形式，进而得到了功能梯度参数、裂纹位置以及入射波频率对应力强度因子影响的规律．     

利用Schmidt方法研究压电材料Ⅰ-型界面裂纹问题

在一定的假设条件下，即不考虑界面裂纹尖端处裂纹面的相互叠入现象，研究了压电材料Ⅰ-型界面裂纹问题．利用Fourier变换使问题的求解转换为求解两对对偶积分方程．进而把裂纹表面位移差展开成Jacobi多项式形式来求解对偶积分方程．结果表明裂纹尖端应力场和电位移场的奇异性与均匀材料裂纹问题的奇异性相同．当上下半平面材料相同时，解可以退化而得到其精确解．     

压电材料中两个非对称平行裂纹的基本解

采用Schmidt方法分析压电材料中非对称平行的双可导通裂纹的断裂性能.利用Fourier变换使问题的求解转换为求解两对以裂纹面位移之差为未知变量的对偶积分方程.为了求解对偶积分方程,直接把裂纹面位移差函数展开成Jacobi多项式形式.最终得到了裂纹的应力强度因子与电位移强度因子之间的关系.数值结果表明,应力强度因子和电位移强度因子与裂纹间的距离、裂纹的几何尺寸有关;与不可导通裂纹有关结果相比,可导通裂纹的电位移强度因子远小于相应问题不可导通裂纹的电位移强度因子.同时可以发现裂纹间的“屏蔽”效应也在压电材料中出现.     

采用新方法研究非局部理论中Ⅰ-型裂纹的断裂问题

采用新的方法研究非局部理论中Ⅰ_型裂纹的断裂问题,进而确定裂纹尖端的应力状态,这种方法就是Schmidt方法·　所得结果比艾林根研究同样问题的结果准确和更加合理,克服了艾林根研究同样问题时遇到的数学困难·　与经典弹性解相比,裂纹尖端不再出现物理意义上不合理的应力奇异性,并能够解释宏观裂纹与微观裂纹的力学问题·