Effect of wall slip on the viscoelastic particle ordering in a microfluidic channel

The formation of a line of equally spaced particles at the centerline of a microchannel, referred as “particle ordering,” is desired in several microfluidic applications. Recent experiments and simulations highlighted the capability of viscoelastic fluids to form a row of particles characterized by a preferential spacing. When dealing with non-Newtonian fluids in microfluidics, the adherence condition of the liquid at the channel wall may be violated and the liquid can slip over the surface, possibly affecting the ordering efficiency. In this work, we investigate the effect of wall slip on the ordering of particles suspended in a viscoelastic liquid by numerical simulations. The dynamics of a triplet of particles in an infinite cylindrical channel is first addressed by solving the fluid and particle governing equations. The relative velocities computed for the three-particle system are used to predict the dynamics of a train of particles flowing in a long microchannel. The distributions of the interparticle spacing evaluated at different slip coefficients, linear particle concentrations, and distances from the channel inlet show that wall slip slows down the self-assembly mechanism. For strong slipping surfaces, no significant change of the initial microstructure is observed at low particle concentrations, whereas strings of particles in contact form at higher concentrations. The detrimental effect of wall slip on viscoelastic ordering suggests care when designing microdevices, especially in case of hydrophobic surfaces that may enhance the slipping phenomenon.     

Synthesis of Mesoporous Wall‐Structured TiO2 on Reduced Graphene Oxide Nanosheets with High Rate Performance for Lithium‐Ion Batteries

Mesoporous wall‐structured TiO₂ on reduced graphene oxide (RGO) nanosheets were successfully fabricated through a simple hydrothermal process without any surfactants and annealed at 400 °C for 2 h under argon. The obtained mesoporous structured TiO₂–RGO composites had a high surface area (99 0307 m² g^?1) and exhibited excellent electrochemical cycling (a reversible capacity of 260 mAh g^?1 at 1.2 C and 180 mAh g^?1 at 5 C after 400 cycles), demonstrating it to be a promising method for the development of high‐performance Li‐ion batteries.     

Hybrid nanomaterial flow and heat transport in a stretchable convergent/divergent channel:a Darcy-Forchheimer model

The flow behavior in non-parallel walls is an important factor of any physical model including cavity flow and canals, which is applicable for diverging/converging channel. The present communication explains that the flow of the hybrid nanomaterial subjected to the convergent/divergent channel has non-parallel walls. It is assumed that the hybrid nanomaterial movement is in the porous region. A Darcy-Forchheimer medium of porosity is considered to interpret the porosity features. A useful similarity function is adopted to get the strong ordinary coupled equations. Numerical solutions are achieved through the Runge-Kutta-Fehlberg(RKF) fourth-fifth order method, and they are validated with the existing results. Physical nature of the involving constraints is reported with the help of plots. It is explored that the velocity of divergent channel decreases, and convergent channel enhances for the higher solid volume faction. Further, the presence of inertia coefficient and porosity parameter amplifies the velocity at the wall.     

自由来流湍流与三维壁面局部粗糙诱导平板边界层不稳定T-S波的数值研究

采用直接数值模拟（DNS）方法,研究了在自由来流湍流与三维壁面局部粗糙作用下平板边界层内诱导产生不稳定T-S波的物理问题.数值结果可知,在平板边界层内发现了二维和三维T-S波组成的波包空间序列以及求得了波包向前传播的群速度大小,从而证明了自由来流湍流与三维壁面局部粗糙作用是激励平板边界层内诱导产生不稳定T-S波的一种机制.随后,建立了平板边界层内被激发的二维和三维T S波的初始幅值与自由来流湍流度,三维壁面局部粗糙的流向长度、展向宽度及法向高度之间的关系.这一问题的深入研究,进一步完善了流动稳定性与湍流理论.     

Spherical confinement of coulombic systems inside an impenetrable box: H atom and the Hulthén potential

The generalized pseudospectral method is used to study spherical confinement in two simple Coulombic systems: (i) well celebrated and heavily studied H atom (ii) relatively less explored Hulthén potential. In both instances, arbitrary cavity size as well as low and higher states are considered. Apart from bound state eigenvalues, eigenfunctions, expectation values, quite accurate estimates of the critical cage radius for H atom for all the 55 states corresponding to , are also examined. Some of the latter are better than previously reported values. Degeneracy and energy ordering under the isotropic confinement situation are discussed as well. The method produces consistently high‐quality results for both potentials for small as well as large cavity size. For the H atom, present results are comparable to best theoretical values, while for the latter, this work gives considerably better estimates than all existing work so far. © 2014 Wiley Periodicals, Inc.     

A combined analytical approach applied to Medieval wall paintings from Puglia (Italy): The study of painting techniques and its conservation state

A combined analytical approach has been applied to the wall paintings, dated from 10th to 14th centuries, of the Santi Stefani crypt at Vaste (Lecce, Southern Italy). These paintings are a precious testimony of Medieval art in Southern Italy. However, the church shows problems of damp as well as clear evidences of flora, fungi and mold presence, and there is little knowledge of the pictorial methodologies used. Raman spectroscopy allowed to determine the palette and to reconstruct the worksite and the chronological sequence of the various paint layers. Kaolinite, calcite, carbon black, hematite, massicot, goethite, indigo and azurite were identified as pigments along with synthetic pigments, like phthalocyanine blue and chrome yellow. Attenuated total reflectance‐Fourier transform infrared spectroscopy suggested the presence of egg as a binder in some pictorial layers. The conservation state of the crypt is poor, and detachments of pigmented layers are frequent because of the presence of subflorescence and efflorescence: nitrate, sulfate and chloride salts have been identified spectroscopically and quantified by ion chromatography. The extensive use of kaolinite in Santi Stefani, actually not uncommon in Medieval art, is observed for the first time in a crypt of Puglia: its use to stabilize some pigments and to improve their adhesion on substrate is proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

An experimental study of the effect of wall temperature nonuniformity on natural convection in an enclosure heated from the side

An experimental study of natural convection in a parallelepipedal enclosure induced by a single vertical wall is described. The upper half of this wall was warm and the lower half cold. The other enclosure walls were insulated. The temperature and flow measurements were performed in the high Rayleigh number regime (10¹⁰<Ra<5×10¹⁰) by using water as the working fluid. The Rayleigh number was based on the enclosure height and the temperature difference between the warm and the cold part of the driving wall. The flow field featured two flat cells, one filled with warm fluid along the top horizontal wall, and the other filled with cold fluid along the bottom horizontal wall. Each of these cells was surrounded by an additional cell as tall as half the enclosure height. The above flow structure prohibited extensive thermal contact between warm and cold fluid, thus limiting the role of convection on the heat transfer process in the cavity. The findings of this study differ significantly from the findings of previous studies based on the ‘classical’ enclosure model possessing two isothermal vertical walls, the one warm and the other cold, and support the view that the use of ‘more realistic‘ temperature boundary conditions in enclosure natural convection needs careful examination.     

A model of stress dissipation in second-moment closures

The paper presents a modified expression for the dissipation rate tensor _ij in the second-moment closure models, which employs the dissipation flatness parameterE and the turbulenceRe number. The expression reproduced the distribution among the three diagonal components of _ij in agreement with the direct numerical simulation of a plane channel flow ofMansour, Kim and Moin, 1988. Implemented in a low-Re-number differentialRe-stress model the relationship yielded predictions of dissipative components better than other models, albeit spoiled by still unsatisfactory modelling of the equation for the energy dissipation rate . on leave from Mainski Fakultet, University of Sarajevo, Bosnia Hercegovina.     

脉动流条件下动脉狭窄血管内脂质浓度极化现象的计算机数值模拟

在脉动流条件下，用计算机数值模拟的方法对低密度脂蛋白(LDL)在动脉狭窄血管段内的质量传输进行了研究。计算结果表明．无论是在定常流还是在脉动流条件下．LDL都将聚积于血管狭窄处峰口附近的流动分离点，LDL壁面浓度在此处最高。在脉动流条件下，LDL在血流受扰动区的聚积高于定常流的值；而且．流动分离点处LDL壁面浓度峰值覆盖的区域也宽于定常流。本文所揭示出的LDL在血管狭窄处的质量传输现象可能在动脉粥样硬化的局部性和动脉狭窄的形成中起着很重要的作用。