Effect of rotation in magneto-thermoelastic transversely isotropic hollow cylinder with three-phase-lag model

This article deals with the various heat source responses in a transversely isotropic hollow cylinder under the purview of three-phase-lag (TPL) generalized thermoelasticity theory. In presence of magnetic field and due to the rotating behavior of the cylinder, the governing equations are redefined for generalized thermoelasticity with thermal time delay. In order to obtain the stress, displacement and temperature field, the field functions are expressed in terms of modified Bessel functions in Laplace transformed domain. When the outer radius of hollow cylinder tends to infinity, the corresponding results are discussed. Finally an appropriate Laplace transform inversion technique is adopted.     

Study on transition process of vacuum arc under transverse magnetic field

The transverse magnetic field (TMF) drives the vacuum arc to move along the surface of the contacts to prevent the local overheating and melting of the contact surfaces. The arcing process has great influence on the breaking capacity of short‐circuit current. In this paper, the arcing process between three types of TMF contacts was investigated. The transition process of an arc from the ignition stage to the diffusion stage was discussed. The transition moment, transition gap distance, and transition current were obtained. It was found that the axial magnetic field component of TMF contacts affected the arc transition process.     

Investigation of unstable motion characteristics of vacuum arc cathode spots between transverse magnetic field contacts

With the improvement of the current level of power grids, the requirements of the opening level of the vacuum switches are also increasing. Vacuum arc cathode spots provide steam and electrons and, to a certain extent, determine the opening capacity of the vacuum switch. In this paper, a vacuum arc cathode spot research platform based on the de-mountable vacuum chamber is constructed. The characteristics of the vacuum arc cathode spots under the transverse magnetic field (TMF) contacts are assessed by a high-speed charge coupled device. The experimental results show that the cathode spot diffusion process can be divided into three processes through cathode spot distribution, arc voltage and current: initial diffusion stage of cathode spots, unstable motion stage of cathode spots, and extinguishing stage. The motion mode of cathode spots during unstable motion stage can be divided into cathode spots group stagnation (CSGS) to multi-cathode jet (MCJ) switch mode, cathode spots group motion (CSGM) to MCJ switch mode, CSGM mode, and MCJ mode. The effects of peak current and contact diameter on unstable motion mode were analysed.     

Characterization of canonical classes for systems of linear ODEs

The equivalence group is determined for systems of linear ordinary differential equations in both the standard form and the normal form. It is then shown that the normal form of linear systems reducible by an invertible point transformation to the canonical form y ⁽ⁿ⁾=0 consists of copies of the same iterative scalar equation. It is also shown that contrary to the scalar case, an iterative vector equation need not be reducible to the canonical form by an invertible point transformation. Other properties of iterative linear systems are also derived, as well as a simple algebraic formula for their general solution. Copyright © 2017 John Wiley & Sons, Ltd.     

Artificial Caries Lesion Characteristics after Secondary Demineralization with Theobromine-Containing Protocol

Developing artificial caries lesions with varying characteristics is needed to adequately study caries process in vitro. The objective of this study was to investigate artificial caries lesion characteristics after secondary demineralization protocol containing theobromine and fluoride. Sixty bovine enamel slabs (4 × 3 mm) were demineralized using a Carbopol-containing protocol for 6 days. A baseline area (2 × 3 mm) was protected with acid-resistant nail varnish, after which specimens were exposed for 24 h to a secondary demineralization protocol containing acetic acid plus one of four fluoride/theobromine combinations (n = 15): theobromine (50 or 200 ppm) and fluoride (0 or 1 ppm). Specimens were sectioned and analyzed using transverse microradiography for changes in mineral content, lesion depth, and surface layer mineralization. Data was analyzed using paired t-test and analysis of variance followed by Bonferroni test at 0.05 significance level. After secondary demineralization, fluoride-containing groups had significantly deeper lesions (p = 0.002 and 0.014) compared to the group with 0 ppm fluoride and 50 ppm theobromine. Mineral content and lesion depth were significantly different compared to baseline for all groups. Theobromine did not show an added effect on mineral uptake. Theobromine-containing groups exhibited particularly deep lesions with a more uniform mineral profile in the presence of fluoride.     

Bonding,Aromaticity and Isomerization of Furfuraldehyde through Off-Nucleus Isotropic Magnetic Shielding

Off-nucleus isotropic magnetic shielding (σ_iso(r)) and multi-points nucleus independent chemical shift (NICS(0-2 Å)) index were utilized to find the impacts of the isomerization of gas-phase furfuraldehyde (FD) on bonding and aromaticity of FD. Multidimensional (1D to 3D) grids of ghost atoms (bqs) were used as local magnetic probes to evaluate σ_iso(r) through gauge-including atomic orbitals (GIAO) at density functional theory (DFT) and B3LYP functional/6-311+G(d,p) basis set level of theory. 1D σ_iso(r) responses along each bond of FD were examined. Also, a σ_iso(r) 2D-scan was performed to obtain σ_iso(r) behavior at vertical heights of 0–1 Å above the FD plane in its cis, transition state (TS) and trans forms. New techniques for evaluating 2D σ_iso(r) cross-sections are also included. Our findings showed that bonds in cyclic and acyclic parts of FD are dissimilar. Unlike the C−O bond of furanyl, the C=O bond of the formyl group is magnetically different. C−C and C−H bonds in furanyl are found similar to those in aromatic rings. A unique σ_iso(r) trend was observed for the C₂−C₆ bond during FD isomerization. Based on NICS(0-2 Å) values, the degree of aromaticity follows the order of cis FD<trans FD<furan<TS FD.     

功能梯度压电材料圆环位移和电势边值问题的精确解

圆环形的压电材料器件在智能结构中得到了广泛的应用。本文推导了横观各向同性功能梯度压电材料圆环在内、外边界上给定位移和电势情况下的一般解。极化方向在圆环的半径方向，材料常数的梯度方向也设定在半径方向，并可表示为半径r的幂，本构关系为线性。然后推导了压电圆环外壁固定、接地，内壁沿垂向有一微小位移、电势分别为余弦分布和均匀分布的问题的精确解，并计算了该问题在这两种电势情况下产生的无量纲形式的径向和环向位移、电势、应力及电位移沿径向分布的数值结果。计算中考虑了不同的材料梯度，以及内壁的位移与电势的不同比例。     

Plane strain wave in an isotropic layer of a viscoelastic material

The velocity and the rate of decay of a strain wave in a layer of a viscoelastic material rigidly fixed on a solid foundation are determined. The wave structure (ratio of the longitudinal to the transverse displacement) and the profiles of these displacements are analyzed. Attenuation of waves in the first mode is found to be more significant than that in an infinite space. The most intense decay is observed at resonance frequencies. A strong effect of compressibility of the medium on wave parameters is revealed. Conditions at which such a system operates as a waveguide are found. For a loss tangent higher than 0.13 (for an incompressible medium), the character of the dispersion dependence is observed to change drastically: the wave velocity decreases with decreasing frequency. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 104–111, May–June, 2006.     

DYNAMIC INTERACTION BETWEEN ELASTIC THICK CIRCULAR PLATE AND TRANSVERSELY ISOTROPIC SATURATED SOIL GROUND

IntroductionThe vibration of the plate on the porous saturated building foundation is a complicateddynamic contact problem.Its consideration is very important in both earthquake and geo-technical engineering.Lots of research works have been done in recent…     

横观各向同性层状场地对入射SH波的响应分析

本文采用横观各向同性层状弹性模型模拟半空间之上的层状了，推导了在ＳＨ波入射时这种场地土的动力刚度矩阵及基岩输入运动时场地呼应的计算公式，算例表明，横观各向同性层状场地与各向同性层状了频谱特性有明显的区别，应当引起重视。