组合式十字形钢管混凝土柱偏压力学性能试验研究

设计了一种由槽钢和方形钢管拼焊形成的组合式十字形钢管混凝土柱,将其灵活地布置在框架结构的中节点,可使柱肢与填充墙等厚,有效地提高建筑使用面积。共制作了6根组合式十字形钢管混凝土柱试件,考虑了偏心距和长细比两种变化参数。通过对其进行偏心受压试验研究,考察了试件的破坏形态和荷载-挠度曲线,并分析了其在不同偏心距和长细比下的荷载-应变曲线发展规律。结果表明:组合式十字形钢管混凝土柱中钢管和槽钢对混凝土的约束作用强,表现为较高的延性系数;偏心距或长细比越大,试件的极限承载力及弹性刚度越小,且偏心距越大延性越好,长细比对延性影响不显著;在受拉侧纵向应变基本上符合平截面假定,在受压侧纵向应变不符合平截面假定。     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

不同材料弹体超声速侵彻钢筋混凝土靶的结构破坏对比实验

设计了超声速钻地结构弹,采用203 mm口径的火炮,开展了25 kg量级弹体在1100~1300 m/s速度范围内侵彻钢筋混凝土靶的实验研究,应用数值仿真对弹体侵彻钢筋混凝土靶的过程进行了模拟计算。基于实验和仿真结果,对超声速侵彻条件下两种金属材料弹体的结构响应、质量损失等问题进行了分析。结果表明:在超声速侵彻钢筋混凝土靶的过程中,两种金属材料的弹体结构变形破坏形式主要为头部侵蚀和侧壁磨蚀,头部侵蚀量的大小与弹体壳体材料有关,高强度G50钢材料更适合用于1200 m/s速度量级的超声速侵彻环境。对出现的“径缩”现象作了初步分析,并对今后工程应用的结构弹体设计提出了指导意见。     

含孔隙混凝土二维细观建模方法研究

根据混凝土的细观组成和结构特点,对传统二维建模方法加以继承与改进,提出了一种高效的分步入侵判定算法.将孔隙直观地反映在模型中,建立了不同的含孔隙混凝土细观模型.对含圆形、椭圆形、多边形骨料与圆形、椭圆形孔隙的混凝土标准试件分别进行了建模研究,结果表明本文的算法具有较强适用性.同时,通过对不同面积率与多种形状骨料/孔隙混凝土的大量建模进一步验证了该算法的效率.模拟了混凝土试件在单轴压缩下的准静态力学性能,分析了混凝土内部孔隙对其裂纹扩展的主要路径、破坏模式以及宏观力学性能的显著影响.     

Properties of bounded stochastic processes employed in biophysics

Abstract

Realistic stochastic modeling is increasingly requiring the use of bounded noises. In this work, properties and relationships of commonly employed bounded stochastic processes are investigated within a solid mathematical ground. Four families are object of investigation: the Sine-Wiener (SW), the Doering–Cai–Lin (DCL), the Tsallis–Stariolo–Borland (TSB), and the Kessler–Sørensen (KS) families. We address mathematical questions on existence and uniqueness of the processes defined through Stochastic Differential Equations, which often conceal non-obvious behavior, and we explore the behavior of the solutions near the boundaries of the state space. The expression of the time-dependent probability density of the Sine-Wiener noise is provided in closed form, and a close connection with the Doering–Cai–Lin noise is shown. Further relationships among the different families are explored, pathwise and in distribution. Finally, we illustrate an analogy between the Kessler–Sørensen family and Bessel processes, which allows to relate the respective local times at the boundaries.     

Mobility of Li+, Na+, and Cs+ cations in Nafion membrane,as studied by NMR techniques

The local mobility and diffusion of Li⁺, Na⁺, and Cs⁺ cations in Nafion 117 membrane were explored by ⁷Li, ²³Na, and ¹³³Cs spin relaxation and pulsed field gradient NMR techniques. It was shown that the macroscopic mass transfer of cations is controlled by ion motion near sulfonate groups. Lithium and sodium cations, whose hydrated energy is higher than the water hydrogen bond energy, are moving together with water molecules, but cesium cations possessing a low hydrated energy are jumping directly between the neighboring sulfonate groups.     

Sorting out the value of spectroscopic tools to assess the Colletotrichum acutatum impact in olive cultivars with different susceptibilities

The olive tree (Olea europaea L.) can be affected by Colletotrichum acutatum, causing a loss of yield and quality of the final products, whilst the incidence of this fungal infection depends on several factors, including cultivar susceptibility. Thus, the effect of C. acutatum infection in cultivars displaying different susceptibilities to this fungal disease (‘Galega Vulgar’ ‐ susceptible, ‘Cobrançosa’ ‐ moderately susceptible, ‘Picual’ ‐ tolerant) has been assessed through spectrophotometric methods and HPLC, while the FTIR spectra of the cuticles have been concomitantly registered, resorting to the ATR accessory. With the support of multivariate analysis, these spectra allowed to discriminate olives with distinct infection times, besides retrieving evidences concerning the different susceptibility of each cultivar, while these observations were reinforced by the spectrophotometric and chromatographic methods. Furthermore, the assessment of the phenolic profile evidenced individual compounds in the distinct cultivars, so as their variations in response to the fungal infection.     

混凝土轴拉加卸载随机损伤模型的建立与试验验证

为了分析及深入探讨混凝土在受拉加载及卸载情况下的力学特性,基于随机损伤本构关系提出了一种混凝土轴拉加卸载模型,推导出了混凝土加卸载的应力 应变关系表达式.为了印证理论表达式,进行了混凝土轴向拉伸及加卸载的试验研究,测得了混凝土的材料参数及其相应的轴拉加卸载应力-应变曲线.结合模型的计算结果,对混凝土的轴拉加卸载试验结果进行了对比分析,结果表明:混凝土轴拉加卸载模型能够预测混凝土的极限强度,同时能描述混凝土的强度软化、加载过程中的弹模折减及卸载后的塑性变形.     

混凝土破裂过程的三维数值模型

利用混合同余法产生了随机变量,将混凝土中的骨料简化为球体,采用循环比较法将随机变量赋给球心坐标(X,Y,Z),实现了混凝土骨料的空间随机分布,最终建立了三维混凝土数值模型。对模型整体进行单元剖分,将骨料、砂浆、界面层分别投影到该有限元网格中,采用多次网格划分技术完成模型网格划分。通过对算例进行有限元计算,结果表明该模型基本上反映了混凝土骨料分布的实际情况,较好地模拟了混凝土的不均匀性与各向异性,验证了建立该模型的方法是可行的。     

粘贴碳纤维布加固混凝土管道试验研究

首次通过对14个素混凝土和14个钢筋混凝土环状试件外粘碳纤维布加固性能进行试验，研究了碳纤维布加固混凝土内压圆管的破坏特征、受力性能和破坏机理。对不同加固方法及一次或二次受力的混凝土管在内压力作用下的极限承载力、荷载一应变关系等方面进行了研究。试验结果表明，用碳纤维布加固混凝土内压管可以显著地提高极限承载力，明显的改善了构件的延性，能够获得良好的力学性能。加固后试件的开裂承载力与未加固试件相比，提高幅度不大，加固试件二次受力与一次受力相比，开裂荷载有所降低，但极限承载力基本相同。用碳纤维布加固内压管是一个新课题，具有很好的应用前景，用本文提出的加固方法具有优良的加固性能，可为工程应用提供参考。