Developing Flexible Quinacridone-Derivatives-Based Photothermal Evaporaters for Solar Steam and Thermoelectric Power Generation

Solar-driven interfacial vaporization by localizing solar-thermal energy conversion to the air−water interface has attracted tremendous attention. In the process of converting solar energy into heat energy, photothermal materials play an essential role. Herein, a flexible solar-thermal material di-cyan substituted 5,12-dibutylquinacridone (DCN−4CQA)@Paper was developed by coating photothermal quinacridone derivatives on the cellulose paper. The DCN−4CQA@Paper combines desired chemical and physical properties, broadband light-absorbing, and shape-conforming abilities that render efficient photothermic vaporization. Notably, synergetic coupling of solar-steam and solar-electricity technologies by integrating DCN−4CQA@Paper and the thermoelectric devices is realized without trade-offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low-grade heat-to-electricity generation functions can provide potential opportunities for fresh water and electricity supply in off-grid or remote areas.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

利用新颖高效气体发生装置以氯气氧化法制备高锰酸钾实验设计及效果*

基于一种新颖高效气体发生装置,设计了以氯气为氧化剂,理论产率接近100%的将锰酸钾高效转化为高锰酸钾的实验方案。实验结果表明:使用本设计制备高纯度高锰酸钾,既可保证高锰酸钾的理论转化率,减少歧化反应副产物对纯度的影响,同时得到的副产品次氯酸钠及氯水可用做无机教学实验的基础试剂,符合“循环经济”指导思想。     

Electrical and Thermal Transport Properties of n-type Bi6Cu2Se4O6 (2BiCuSeO + 2Bi2O2Se)

New thermoelectric materials, n-type Bi₆Cu₂Se₄O₆ oxyselenides, composed of well-known BiCuSeO and Bi₂O₂Se oxyselenides, are synthesized with a simple solid-state reaction. Electrical transport properties, microstructures, and elastic properties are investigated with an emphasis on thermal transport properties. Similar to Bi₂O₂Se, it is found that the halogen-doped Bi₆Cu₂Se₄O₆ possesses n-type conducting transports, which can be improved via Br/Cl doping. Compared with BiCuSeO and Bi₂O₂Se, an extremely low thermal conductivity can be observed in Bi₆Cu₂Se₄O₆. To reveal the origin of low thermal conductivity, elastic properties, sound velocity, Grüneisen parameter, and Debye temperature are evaluated. Importantly, the calculated phonon mean free path of Bi₆Cu₂Se₄O₆ is comparable to the interlayer distance for BiO─CuSe and BiO─Se layers, which is ascribed to the strong interlayer phonon scattering. Contributing from the outstanding low thermal conductivity and improved electrical transport properties, the maximum ZT ≈0.15 at 823 K and ≈0.11 at 873K are realized in n-type Bi₆Cu₂Se_3.2Br_0.8O₆ and Bi₆Cu₂Se_3.6Cl_0.4O₆, respectively, indicating the promising thermoelectric performance in n-type Bi₆Cu₂Se₄O₆ oxyselenides.     

A micrometer head integrated microfluidic device for facile droplet size control and automatic measurement of a droplet size

A novel microfluidic droplet generator is proposed, which can control the droplet size through turning an integrated micrometer head with ease, and the size of the produced micro-droplet can be automatically and real-time monitored by an open-sourced software and off-the-shelf hardware.     

Effects of C3-aromatic heterocycles on 1,3,5-triaryl-2-pyrazoline sulfonium salt photoacid generators as light-emitting diode-sensitive cationic photoinitiators

Four 1,5-diphenyl-3-aromatic heterocyclyl-2-pyrazoline-based sulfonium salt photoacid generators (PAGs) with different aromatic heterocycles substituted on C3 atom and dimethyl sulfonium group on C5 atom were synthesized. These PAGs were highly photosensitive in the 365–425 nm light-emitting diode region, and the intramolecular charge transfer from the pyrazoline ring to sulfonium salts induced efficient photolysis and high Φ_H⁺. The heterocycles as well as their substituted positions significantly influenced the energy of the S₂ orbital, which was determined by the electrochemical and absorption properties of the PAGs. The raising of the S₂ orbital energy enlarged the energy gap of S₀–S₂ and S₁–S₂, resulting in blue shift of the absorption spectra and increase in the quantum yield of photoacid generation (Φ_H⁺), respectively. When the energy of excited electrons was higher than that of the S₂ orbital, the transition from S₀ to S₂ (π–π*) occurred before the C-S cleavage on S₁ and the PAGs showed high Φ_H⁺ values (0.52–0.72). The transition from S₀ to S₁ (π–σ*) occurred when the energy of electrons is lower than that of the S₂ orbital, and the PAGs showed low Φ_H⁺ value. The photopolymerization kinetics demonstrated that these PAGs were highly efficient cationic photoinitiators.     

Enhancement of thermoelectric properties of D-A conjugated polymer through constructing random copolymers with more electronic donors

Developing new D-A conjugated polymer system for thermoelectric (TE) application is highly desirable. Herein, a series of random copolymers by incorporating 3,4-ethylenedioxythiophene (EDOT) electron rich units into a diketopyrrolopyrrole (DPP) D-A conjugated polymer were designed and synthesized. Compared to the alternating conjugated copolymer PDPP-3T, the HOMO level of the random copolymers are increased as part of the electron deficiency acceptor DPP units in the polymer chain were superseded by electron rich EDOT, which could contribute to effective p-doping. Moreover, through incorporating EDOT to construct random copolymers, it can also induce an orientation change from face-on dominated to edge-on dominated orientation as well as enhance the packing of copolymer chains, which is beneficial to the charge transport. Under same doping condition, the electrical conductivities of the doped polymers increase and the Seebeck coefficient decrease as the increasing of EDOT content, resulting in an optimized power factor of 6.4 μW m⁻¹ K⁻² for the random polymer with EDOT content of 40% which is four times higher than that of alternating conjugated copolymer PDPP-3T. These results demonstrated that constructing random copolymers by incorporating more electronic donors into D-A conjugated polymers may be a promising strategy for developing TE conjugated polymers.     

Enhanced thermoelectric performance of PEDOT:PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.