发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

A theory of finite tensile deformation of double-network hydrogels

A continuum damage model was developed to describe the finite tensile deformation of tough double-network (DN) hydrogels synthesized by polymerization of a water-soluble monomer inside a highly crosslinked rigid polyelectrolyte network. Damage evolution in DN hydrogels was characterized by performing loading-unloading tensile tests and oscillatory shear rheometry on DN hydrogels synthesized from 3-sulfopropyl acrylate potassium salt (SAPS) and acrylamide (AAm). The model can explain all the mechanical features of finite tensile deformation of DN hydrogels, including idealized Mullins effect and permanent set observed after unloading, qualitatively and quantitatively. The constitutive equation can describe the finite elasto-plastic tensile behavior of DN hydrogels without resorting to a yield function. It was showed that tensile mechanics of DN hydrogels in the model is controlled by two material parameters which are related to the elastic moduli of first and second networks. In effect, the ratio of these two parameters is a dimensionless number that controls the behavior of material. The model can capture the stable branch of material response during neck propagation where engineering stress becomes constant. Consistent with experimental data, by increasing the elastic modulus of the second network the finite tensile behavior of the DN hydrogel changes from necking to strain hardening.     

Controlling thermomechanical behavior of semicrystalline hydrogenated polynorbornene through the cis- to trans-cyclopentylene ratio

Though polynorbornene synthesized by ring-opening metathesis polymerization has an intrinsically all-cis configuration of the cyclopentylene backbone rings, a fraction of these rings can be epimerized to the trans configuration during hydrogenation over suitable catalysts. By varying the method of hydrogenation, semicrystalline hydrogenated polynorbornenes (hPNs) with trans levels between 0 and 36% were obtained. With increasing trans content, the glass transition temperature, melting point, and enthalpy of melting decrease modestly. By contrast, the temperature at which the hPN crystal transitions into a rotationally disordered polymorph varies strongly with trans content, ranging from 126 °C (all-cis) to 71 °C at 27% trans; at trans contents of 34% and above, no rotationally-ordered phase is observed at any temperature. The room-temperature Young's modulus shows no dependence on trans content, while the yield stress drops by 20% at 1% trans content and slowly decreases further with additional epimerization. The temperature dependence of the Young's modulus differs for trans-containing versus all-cis polymers, while the temperature dependence of the yield stress is set by the polymorph type (rotationally ordered vs. disordered).     

Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

Agave fructans and oligofructose decrease oxidative stress in brain regions involved in learning and memory of overweight mice

Obesity is currently a public health problem worldwide. Recently, non-reducing carbohydrates, that include β(2→1) and β(2→6) linkages in their structure, have been of particular interest in the field of obesity because they are involved in lipid metabolism. Some of these are agave fructans (AF) and oligofructose (OF). In this study, we evaluated both AF and OF on oxidative stress (OS) markers in the brain of overweight mice (OM). AF and OF decreased TBARS levels and carbonyls at different levels in hippocampus (HP), frontal cortex (FC) and cerebellum (CB) of OM. The results indicated that fructans may have anti-oxidative potential and can be used as an alternative treatment for the prevention of the consequences of this pathology.     

Enhancing hydrogen evolution of MoS2 basal planes by combining single-boron catalyst and compressive strain

MoS₂ is a promising candidate for hydrogen evolution reaction (HER), while its active sites are mainly distributed on the edge sites rather than the basal plane sites. Herein, a strategy to overcome the inertness of the MoS₂ basal surface and achieve high HER activity by combining single-boron catalyst and compressive strain was reported through density functional theory (DFT) computations. The ab initio molecular dynamics (AIMD) simulation on B@MoS₂ suggests high thermodynamic and kinetic stability. We found that the rather strong adsorption of hydrogen by B@MoS₂ can be alleviated by stress engineering. The optimal stress of −7% can achieve a nearly zero value of ΔG_H (~ −0.084 eV), which is close to that of the ideal Pt–SACs for HER. The novel HER activity is attributed to (i) the B– doping brings the active site to the basal plane of MoS₂ and reduces the band-gap, thereby increasing the conductivity; (ii) the compressive stress regulates the number of charge transfer between (H)–(B)–(MoS₂), weakening the adsorption energy of hydrogen on B@MoS₂. Moreover, we constructed a SiN/B@MoS₂ heterojunction, which introduces an 8.6% compressive stress for B@MoS₂ and yields an ideal ΔGH. This work provides an effective means to achieve high intrinsic HER activity for MoS₂.     

HgCdTe薄膜的输运特性及其应力调控

窄禁带直接带隙半导体材料碲镉汞(Hg1–xCdxTe)是一种在红外探测与自旋轨道耦合效应基础研究方面都具有重要应用意义的材料.本文对单晶生长的体材料Hg0.851Cd0.149Te进行阳极氧化以形成表面反型层,将样品粘贴在压电陶瓷上减薄后进行磁输运测试,在压电陶瓷未加电压时观察到了明显的SdH振荡效应.对填充因子与磁场倒数进行线性拟合,获得样品反型层二维电子气的载流子浓度为ns=1.25×10^16m^-2.在不同磁场下,利用压电陶瓷对样品进行应力调控,观测到具有不同特征的现象,分析应是样品中存在二维电子气与体材料两个导电通道.零磁场下体材料主导的电阻的变化应来源于应力导致的带隙的改变;而高场下产生类振荡现象的原因应为应力导致的二维电子气能级的分裂.     

超声速流动中非线性EASM湍流模式应用研究

针对超声速复杂流动区域精确模拟的需要，发展了基于k-ω可压缩修正形式的非线性显式代数雷诺应力模式（EASM），提高了该模式对超声速复杂流动的数值模拟精度。通过对二维超声速凹槽和三维双椭球的数值计算表明，与SA和SST常规线性涡黏性湍流模式比较，非线性的EASM模式对大分离以及剪切层流动结构的刻画能力更精细，对剪切层再附区的压力及摩擦系数分布模拟更加精确；EASM模式能够准确地模拟二次激波引起的压强和热流分布情况。     

Information Network Modeling for U.S. Banking Systemic Risk

In this work we investigate whether information theory measures like mutual information and transfer entropy, extracted from a bank network, Granger cause financial stress indexes like LIBOR-OIS (London Interbank Offered Rate-Overnight Index Swap) spread, STLFSI (St. Louis Fed Financial Stress Index) and USD/CHF (USA Dollar/Swiss Franc) exchange rate. The information theory measures are extracted from a Gaussian Graphical Model constructed from daily stock time series of the top 74 listed US banks. The graphical model is calculated with a recently developed algorithm (LoGo) which provides very fast inference model that allows us to update the graphical model each market day. We therefore can generate daily time series of mutual information and transfer entropy for each bank of the network. The Granger causality between the bank related measures and the financial stress indexes is investigated with both standard Granger-causality and Partial Granger-causality conditioned on control measures representative of the general economy conditions.     

Microstructure and Thermal and Tensile Properties of Poly(vinyl alcohol) Nanocomposite Films Reinforced by Polyacrylamide Grafted Cellulose Nanocrystals

Abstract

Polyacrylamide grafted cellulose nanocrystals (CNC-g-PAM) were incorporated into poly(vinyl alcohol) (PVA) by a solution casting method to fabricate nanocomposite films with enhanced thermal and tensile properties. The microstructure and the thermal and tensile properties of the PVA/CNC-g-PAM nanocomposite films were investigated as a function of CNC-g-PAM content. Infrared spectroscopy corroborated the presence of hydrogen bonds between PVA and the PAM on the surface of the CNC. Polarized optical microscopy and scanning electron microscopy revealed good dispersion of the CNC-g-PAM in the PVA matrix and good interfacial compatibility. Accordingly, the initial degradation temperature of the nanocomposite films was elevated slightly compared to pristine PVA film. The glass transition temperature, melting temperature, and crystallinity of the PVA also varied slightly after the incorporation of the CNC-g-PAM. At both 0% and 50% RH, the nanocomposite films showed an obvious increase of elastic modulus, no apparent change of breaking strength and a drastic reduction of elongation at break with increasing CNC-g-PAM content.