α-Mangostin exhibits antidepressant-like effects mediated by the modification of GABAergic,serotonergic and dopaminergic systems

Abstract

The present study explored the antidepressant-like activity of α-mangostin (α-MG) and the possible mechanism in this process in the tail suspension test (TST) in mice. The results revealed that α-MG (5?mg/kg, i.p.) exhibited markedly antidepressant-like activity, which could be reversed by pretreatment with haloperidol (a non-selective D₂ receptor antagonist), bicuculline (a competitive GABA antagonist), p-chlorophenylalanine (an inhibitor of 5-HT synthesis). Meanwhile, α-MG also effectively increased the brain DA, 5-HT and GABA levels in mice exposed to TST, indicating that the antidepressant-like effect of α-MG might be mediated by the GABAergic, serotonergic and dopaminergic systems.

     

100kV直流高温超导电缆终端应力锥设计

本文提出了一种新的单直线应力锥设计方法,根据PPLP材料的绝缘特性,结合超导电缆的本体尺寸和设计电压,给出了增饶绝缘厚度和应力锥轴向长度的设计数据,其中增饶绝缘厚度为3.5 mm,应力锥轴向长度为38.5 mm,并对单直线应力锥进行电场数值分析,结果表明,所设计的单直线应力锥满足100 kV直流高温超导电缆运行要求。     

基于SWT方法的钢绞线索微动疲劳特性分析

为得到钢绞线索丝间接触区的应力场分布并预测微动疲劳裂纹萌生位置和微动疲劳寿命，本文利用参数化方法建立了精细化的钢绞线拉索有限元模型，包括整索模型和不同层丝间接触区域的局部精细化子模型．分析了钢绞线索在两种交变荷载工况下的应力场变化情况，并基于多轴疲劳SWT(Smith-Watson-Topper)临界平面法进行了疲劳特性分析和疲劳寿命预测．主要结论如下：钢绞线索内接触区边缘处的微动幅值较大，中心处几乎没有相对滑动，微动疲劳的初始裂纹萌生点位于接触区域边缘；经不同区域子模型分析比较，在轴向循环荷载作用下，外层钢丝的接触区域比内层钢丝更易发生微动疲劳损伤；在横向位移循环荷载作用下，同层钢丝因位置角度不同而产生了较大的疲劳特性差异，且相比轴向循环拉伸，该工况下最不利单丝的微动疲劳寿命更低；与非接触区域相比，接触区的疲劳寿命大幅降低，微动现象对钢绞线索的抗疲劳性能有明显降低作用．     

反相悬浮聚合法制备硫氰酸根阴离子印迹微球及其离子识别性质

利用反相悬浮聚合法, 成功制备了微米级硫氰酸根(SCN^-)阴离子印迹微球。 以溶有分散剂Span-60的环已烷为分散介质, 以溶有模板阴离子SCN^-、阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)及交联剂N, N'-亚甲基双丙烯酰胺(MBA)的水溶液为分散相, 构成反相悬浮聚合体系, 在水相液滴中使DAC发生交联聚合, 成功制备了粒径约为200 μm的离子印迹微球(IIPMs)。 以同为一价阴离子的NO₃^-和I^-为对比离子, 深入考察研究了该离子印迹微球的离子识别与结合特性。 研究结果表明, 凭借强静电相互作用, 在水相液滴中, 阳离子单体DAC与模板阴离子SCN^-紧密相结合, 故在DAC交联聚合的同时, 实现了阴离子SCN^-的印迹。 所制备的阴离子印迹微球IIPMs对模板阴离子SCN^-具有很高的结合能力(结合容量为3.3 mmol/g(192 mg/g))和特异的识别选择性。 该印迹微球可选择性地识别与结合离子混合溶液中的SCN^-离子, 相对于NO₃^-和I^-阴离子, IIPMs对SCN^-阴离子的选择性系数分别为3.24和6.78。 该印迹微球还具有优良的重复使用性能。     

Exploring the effect of radiation crosslinking on the physico‐mechanical,dynamic mechanical and dielectric properties of EOC–PDMS blends for cable insulation applications

This work focuses on the effect of electron beam irradiation on the physico‐mechanical, dynamic mechanical and dielectric properties of blends based on ethylene octene copolymer (EOC) and poly dimethyl siloxane (PDMS) rubber. It is found that electron beam irradiation caused considerable improvement in the physico‐mechanical properties; the tensile strength was enhanced by nearly 35% for 70:30 EOC:PDMS blend. Phase morphology of the blends analyzed before irradiation by scanning electron microscopy (SEM) exhibited droplet/matrix morphology with sizes of the PDMS rubber domain varying from 0.55 µm to 0.47 µm as the amount of PDMS rubber decreased from 30 wt% to 10 wt%. This reduction in the PDMS rubber domain has been correlated with the physico‐mechanical properties of the blends. Further, the dynamic mechanical properties and creep behavior of these EOC:PDMS blends before and after irradiation has been studied. It is inferred that the 70:30 blend after radiation crosslinking shows a 17% decrease in the creep compliance, i.e. higher creep resistance compared to neat blends. All the radiation crosslinked blends exhibited lower dielectric constant, lower dielectric loss and higher electrical resistivity as compared to the virgin blends which makes it suitable for cable insulating application. Copyright © 2016 John Wiley & Sons, Ltd.     

Research on mechanical and dielectric properties of XLPE cable under accelerated electrical‐thermal aging

Research into the electrical‐thermal aging properties of cross‐linked polyethylene (XLPE) cable has great significance, because of its wide application. This study conducted accelerated electrical‐thermal aging tests on 10‐kV XLPE cable in order to assess the cable's mechanical and dielectric properties. After being aged by applying 34.8‐kV AC voltage at the four temperatures of 90, 103, 114, and 135°C, the cable samples were taken out in five stages according to the aging time and cut into slices. The slices were conducted experiments to test the breaking elongation, tensile strength, gel content, breakdown voltage, and frequency spectrums of the dielectric constant and dielectric loss. The results demonstrate that the mechanical strength and gel content of XLPE vary greatly under different aging temperatures, a finding that is associated with the crystallization characteristics of the material. The breakdown voltage shows a slight decreasing trend with aging time. The dielectric constant decreases with aging time in high‐frequency areas (10³–10⁶ Hz), while the dielectric loss factor increases with aging time at low frequencies (10^?2–0 Hz). These two parameters can be used to characterize the degree of aging in cable. Copyright © 2016 John Wiley & Sons, Ltd.     

悬浮液直接进样ICP–OES法测定高纯氧化铝中的铁、钛、硅、铬

采用悬浮液直接进样电感耦合等离子体发射光谱法(ICP–OES)测定高纯氢氧化铝中铁、钛、硅、铬的含量。悬浮液用电磁搅拌器搅拌,均匀地分散在溶液中,通过仪器蠕动泵进入雾化室,均匀无阻地导入ICP光源。Fe,Ti,Si,Cr的分析谱线分别为259.940,336.112,251.611,205.552 nm;RF功率为1 300W,等离子体气流量为13.0 L/min,雾化器气体流量为0.60 L/min,辅助气流量为1.00 L/min。Fe,Ti,Si,Cr的质量浓度分别在0.0~30.0,0.0~15.0,0.0~90.0,0.0~15.0μg/m L范围内与信号强度呈良好的线性,线性相关系数均大于0.999,方法的检出限为0.027 6~0.993 9μg/m L,测量结果的相对标准偏差为0.65%~6.84%(n=11),回收率为95.0%~104.8%。该法抗干扰能力强、线性范围宽,适用于高纯氢氧化铝中铁、钛、硅、铬含量的分析。     

THEORETICAL AND EXPERIMENTALRESEARCH ON DYNAMIC BEHAVIOR OF GUYED MASTS UNDER WIND LOAD

I. INTRODUCTION Wind-induced vibration is the critical factor for the safety of guyed masts. Many dynamic modelshave been proposed in the literature[1 , 2]. However, there are obvious de?ciencies in many of theseprevious works owing to the poor cabl…     

PREPARATION AND CHARACTERIZATION OF SUPERPARAMAGNETIC FUNCTIONAL POLYMERIC MICROPARTICLES

Superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (Pst-DVB-GMA) microparticles were prepared via a modified suspension polymerization process. A magnetic fluid was first prepared by a chemical co-precipitation method. Then magnetic microparticles were produced by mixing the monomers and the magnetic fluid with water in the presence of a stabilizer poly(vinyl pyrrolidone) (PVP) to form a suspension, and finally benzoyl peroxide was added to initiate the co-polymerization. The morphology and magnetic properties of the microparticles were examined by TEM and VSM. The spherically shaped microparticles, with a size range of 4 to 7 pm, showed distinct superparamagnetic characteristics. XRD was used to investigate the structure of the magnetite particles dispersed in the polymer matrix. The microparticles with epoxy groups on their surface can be applied directly to the seoaration of biomolecules.