在氢环境中钢的应变速率效应

从静态、准静态直到冲击的应变速率范围内(.ε=10-7~103sec-1),研究了在氢环境中应变速率对10钢力学性能的影响。结果表明:对于10钢,应变速率在3.33×10-3~3.33×10-6sec-1范围,氢的影响最明显,随着应变速率的提高或降低,氢的影响逐渐减弱;对于渗氢和未渗氢试样,应变速率在10-4~103sec-1范围内,屈服应力都随着应变速率的增加而增加,在.ε<6.0×102sec-1区域Ⅰ内流动应力与应变速率呈线性关系,在.ε>6.0×102sec-1区域Ⅱ内流动应力对应变速率十分敏感。与准静态时相比较,高应变速率下未渗氢试样的流动应力增加了1.1倍,而渗氢试样则增加了1.5倍。文中给出了可以精确描述10钢在高应变速率下渗氢与未渗氢试样的应力应变关系表达式。     

铝-锂合金动态扭转实验研究

利用霍普金森扭杆（Torsional Split-Hopkinson Bar）技术对三种不同成份或状态的铝-锂合金材料的动态应力-应变-应变率关系进行了实验测定。应变率范围由1300s-1到2600s-1,研究表明随着应变率的提高,三种不同成份或状态的铝-锂合金材料的韧性和强度都有不同程度的提高。对剪切带的初步观察发现,随应变率的增加,剪切带有变窄的趋势。     

35CrMo合金钢疲劳短裂纹扩展规律的试验研究

本文通过试验研究了35CrMo 合金钢三点弯曲试样疲劳短裂纹的扩展特性;用电测法得到了裂尖处的载荷—应变标定关系。试验结果表明,短裂纹的扩展速率正比于局部应力幅的幂次和裂纹长度,即 da/dN=A(?),可以较好地描述疲劳短裂纹的扩展规律。     

Elastoplastic Axisymmetric Stress-Strain State of Laminated Shells Made of Isotropic and Transversely Isotropic Materials with Different Moduli

A method is developed for analysis of the elastoplastic stress-strain state of laminated shells of revolution under axisymmetric loading. The shells are made of isotropic and transversally isotropic materials with different moduli. The method is based on the Kirchhoff-Love hypotheses for the whole laminate, the theory of deformation along paths of small curvature (for isotropic materials), and the theory of elasticity with different tensile and compressive moduli (transversely isotropic materials). The problem is solved by the method of successive approximations. Numerical examples are given __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 8, pp. 88–96, August 2005.     

Axisymmetric thermoelastoplastic stress-strain state of flexible laminated transversely isotropic shells

The paper presents a technique for numerical analysis of the elastoplastic stress-strain state of flexible laminated shells of revolution made of isotropic and transversely isotropic materials and subjected to axisymmetric loading and heating. The technique is based on the Kirchhoff-Love hypotheses for the whole laminate. The deformation of the isotropic materials is described using the theory of deformation along paths of small curvature. The deformation of the transversely isotropic material is described using the flow theory with isotropic hardening. The process of loading is divided into steps at each of which the stress-strain state is determined by the method of successive approximations. A numerical example is given __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 12, pp. 76–86, December, 2006.     

Thermoelastoplastic axisymmetric stress-strain state of laminated orthotropic shells

A method is proposed for the numerical analysis of the thermoelastoplastic stress-strain state of laminated shells of revolution, made of isotropic and orthotropic materials, under axisymmetric loading. The method is based on the Kirchhoff-Love hypotheses for a layer stack, the theory of deformation along paths of small curvature for isotropic materials, and Hills theory of flow with isotropic hardening for orthotropic materials. The problem is solved by the method of successive approximations. A numerical example is given.__________Translated from Prikladnaya Mekhanika, Vol. 40, No. 12, pp. 84–91, December 2004.     

ANALYSIS OF THE LOCALIZATION OF DAMAGE AND THE COMPLETE STRESS-STRAIN RELATION FOR MESOSCOPIC HETEROGENEOUS ROCK UNDER UNIAXIAL TENSILE LOADING

The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening, rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.     

岩石试件端面摩擦效应数值模拟研究

试件端面摩擦效应直接影响试件内的塑性等效应变、侧向位移的分布和单元应力应变曲线。本文运用ANSYS中的接触单元模拟了平面应变状态下端面摩擦效应对塑性等效应变、侧向位移和单元应力应变曲线的影响,得到了不同摩擦系数时塑性等效应变及侧向位移的渐进变化形式。当接触面摩擦较小时,塑性等效应变图案为上下两个X形网络,侧向位移上下分布均匀;当接触面摩擦增大时,塑性等效应变网络向中部靠拢并且明显增大,侧向位移上下分布不均匀,中部较上下端面位移大;当试件端面侧向位移被限制,即摩擦力很大时,塑性等效应变网络变为一个X形局部化带,侧向位移分布更加不均匀,中部明显隆起。     

A numerical approach to spherical indentation techniques for material property evaluation

In this work, some inaccuracies and limitations of prior indentation theories, which are based on experimental observations and the deformation theory of plasticity, are investigated. Effects of major material properties on the indentation load-deflection curve are examined via finite element (FE) analyses based on incremental plasticity theory. It is confirmed that subindenter deformation and stress-strain distribution from deformation plasticity theory are quite dissimilar to those obtained from incremental plasticity theory. We suggest an optimal data acquisition location, where the strain gradient is the least and the effect of friction is negligible. A new numerical approach to indentation techniques is then proposed by examining the FE solutions at the optimal point. Numerical regressions of obtained data exhibit that the strain-hardening exponent and yield strain are the two key parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides a stress-strain curve and material properties with an average error of less than 3%.     

THE NONLINEAR MAGNETOELASTIC PROPERTIES OF 〈 110 〉 ORIENTED TBo.27DYo.73FE1.95 POLYCRYSTALLINE ALLOYS UNDER COUPLED MAGNETOMECHANICAL LOADING

In the paper, the nonlinear magnetoelastic properties of composition Tb0.27Dy0.73 Fel.95 〈 110 〉 oriented polycrystalline alloys are investigated under coupled loads of high mag- netic field and compressive stress. The magnetization and magnetostriction are measured simul- taneously under applied magnetic field from -800 to 800 kA/m and compressive stress from 0 to 25 MPa at room temperature. The strain coefficient and relative permeability are obtained by differential calculation from the experimental curves. The results show that the values of satura- tion magnetization （M~） under different compressive stresses remain invariably constant in the region of the high magnetic field. The saturation magnetostriction （As） increases with increasing compressive stress and reaches 1680 ~ 10-6 under 25 MPa. According to the increase of the com- pressive stress, the hysteretic loop area of magnetization and magnetostriction increases, while the maximum relative permeability and strain coefficient decrease. Additionally, the influence of the bias magnetic field on the mechanical property is taken into account. The stress-strain relation- ship is nonlinear and sensitive to the applied external magnetic fields along the axis of rod. The results obtained are a useful complement to the existing experiments for theoretical approaches and engineering applications.