发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

基于气体浓度定量的嗅觉刺激器优化设计

现有的基于磁共振测量的嗅觉刺激器，通过调节嗅剂液体浓度的方法可以实现不同浓度的嗅觉刺激，但随着实验进行，受到嗅剂挥发以及实验环境（温度、湿度、气流量）变化的影响，很难确保输送至鼻腔的嗅剂气体浓度的稳定性，进而影响实验结果的准确性．本研究对本实验室前期开发的嗅觉刺激装置进行改进，实现了气体浓度精确定量．改进后的嗅觉刺激器主要分为三个部分：控制系统、反馈系统和气路系统．控制系统主要实现气路系统的送气控制和嗅剂气体浓度调节；反馈系统则负责对气体浓度进行测量；气路系统则在原有基础上添加活性炭装置，降低无关因素干扰．装置改进之后，不同气路切换时间为75.2 ms，比原装置减少了1 s，有效提高刺激精度．实验结果显示，气体浓度调节前，300 s内乙醇、吡啶、乙酸戊酯嗅剂气体浓度分别下降6.7%、71.4%、79.2%，嗅剂气体浓度短时间内发生较大改变．加入气体浓度调节功能后，当气体浓度下降至目标浓度的90%时，可通过调节气泵电压改变嗅剂气流与空气气流比例，从而调节嗅剂气体浓度至目标值，其中吡啶、乙酸戊酯用时13 s．     

Controlling thermomechanical behavior of semicrystalline hydrogenated polynorbornene through the cis- to trans-cyclopentylene ratio

Though polynorbornene synthesized by ring-opening metathesis polymerization has an intrinsically all-cis configuration of the cyclopentylene backbone rings, a fraction of these rings can be epimerized to the trans configuration during hydrogenation over suitable catalysts. By varying the method of hydrogenation, semicrystalline hydrogenated polynorbornenes (hPNs) with trans levels between 0 and 36% were obtained. With increasing trans content, the glass transition temperature, melting point, and enthalpy of melting decrease modestly. By contrast, the temperature at which the hPN crystal transitions into a rotationally disordered polymorph varies strongly with trans content, ranging from 126 °C (all-cis) to 71 °C at 27% trans; at trans contents of 34% and above, no rotationally-ordered phase is observed at any temperature. The room-temperature Young's modulus shows no dependence on trans content, while the yield stress drops by 20% at 1% trans content and slowly decreases further with additional epimerization. The temperature dependence of the Young's modulus differs for trans-containing versus all-cis polymers, while the temperature dependence of the yield stress is set by the polymorph type (rotationally ordered vs. disordered).     

Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Enhancing hydrogen evolution of MoS2 basal planes by combining single-boron catalyst and compressive strain

MoS₂ is a promising candidate for hydrogen evolution reaction (HER), while its active sites are mainly distributed on the edge sites rather than the basal plane sites. Herein, a strategy to overcome the inertness of the MoS₂ basal surface and achieve high HER activity by combining single-boron catalyst and compressive strain was reported through density functional theory (DFT) computations. The ab initio molecular dynamics (AIMD) simulation on B@MoS₂ suggests high thermodynamic and kinetic stability. We found that the rather strong adsorption of hydrogen by B@MoS₂ can be alleviated by stress engineering. The optimal stress of −7% can achieve a nearly zero value of ΔG_H (~ −0.084 eV), which is close to that of the ideal Pt–SACs for HER. The novel HER activity is attributed to (i) the B– doping brings the active site to the basal plane of MoS₂ and reduces the band-gap, thereby increasing the conductivity; (ii) the compressive stress regulates the number of charge transfer between (H)–(B)–(MoS₂), weakening the adsorption energy of hydrogen on B@MoS₂. Moreover, we constructed a SiN/B@MoS₂ heterojunction, which introduces an 8.6% compressive stress for B@MoS₂ and yields an ideal ΔGH. This work provides an effective means to achieve high intrinsic HER activity for MoS₂.     

HgCdTe薄膜的输运特性及其应力调控

窄禁带直接带隙半导体材料碲镉汞(Hg1–xCdxTe)是一种在红外探测与自旋轨道耦合效应基础研究方面都具有重要应用意义的材料.本文对单晶生长的体材料Hg0.851Cd0.149Te进行阳极氧化以形成表面反型层,将样品粘贴在压电陶瓷上减薄后进行磁输运测试,在压电陶瓷未加电压时观察到了明显的SdH振荡效应.对填充因子与磁场倒数进行线性拟合,获得样品反型层二维电子气的载流子浓度为ns=1.25×10^16m^-2.在不同磁场下,利用压电陶瓷对样品进行应力调控,观测到具有不同特征的现象,分析应是样品中存在二维电子气与体材料两个导电通道.零磁场下体材料主导的电阻的变化应来源于应力导致的带隙的改变;而高场下产生类振荡现象的原因应为应力导致的二维电子气能级的分裂.     

Information Network Modeling for U.S. Banking Systemic Risk

In this work we investigate whether information theory measures like mutual information and transfer entropy, extracted from a bank network, Granger cause financial stress indexes like LIBOR-OIS (London Interbank Offered Rate-Overnight Index Swap) spread, STLFSI (St. Louis Fed Financial Stress Index) and USD/CHF (USA Dollar/Swiss Franc) exchange rate. The information theory measures are extracted from a Gaussian Graphical Model constructed from daily stock time series of the top 74 listed US banks. The graphical model is calculated with a recently developed algorithm (LoGo) which provides very fast inference model that allows us to update the graphical model each market day. We therefore can generate daily time series of mutual information and transfer entropy for each bank of the network. The Granger causality between the bank related measures and the financial stress indexes is investigated with both standard Granger-causality and Partial Granger-causality conditioned on control measures representative of the general economy conditions.     

基于相场描述的拉压不对称强度结构拓扑优化

运用了基于相场描述的拓扑优化方法，来寻找在拉伸和压缩中表现出不对称强度行为的连续体结构的最优布局。依据Drucker-Prager屈服准则和幂率插值方案，优化问题可以描述为在局部应力约束下的最小化结构的体积。用qp放松法来解决应力约束的奇异性，并采用基于P-norm函数的聚合方法对应力约束进行凝聚，该方法实现了约束个数的降低，同时引入了稳定转化法来处理大量的局部应力约束和高度非线性的应力行为，以修正应力，提高优化收敛的稳定性。在优化问题求解时，使用拉格朗日乘子法对目标函数和应力约束进行处理。利用伴随变量法进行灵敏度分析，并通过求解Allen-Cahn方程更新相场函数设计变量。数值算例证明了该优化模型和相应数值技术的有效性，相关算例还揭示了考虑拉压不同强度和考虑同拉压强度约束时得到的结构优化拓扑构型具有显著的差异。