受限亚音速气流中倒置悬臂壁板静气弹稳定性的理论及实验研究

板壳结构在航空航天、高速列车、能量采集等诸多工程领域已经得到了广泛应用. 将悬臂壁板倒置于轴向气流中并在壁板周围流场中设置刚性壁面可有效地调控壁板的失稳速度, 是俘能器优化设计的重要措施之一. 但针对刚性壁面作用下亚音速气流中倒置悬臂壁板的失稳机制仍需要开展深入研究. 本文以受限亚音速气流中倒置的二维悬臂壁板为对象, 以理论分析及风洞实验为手段, 研究了单侧刚性壁面效应对倒置悬臂壁板静态失稳特性的影响规律. 在理论分析中, 首先应用镜像函数法来处理壁面约束条件, 基于算子理论研究获得了以Possio积分方程为表征的壁板气动力, 壁面效应实际表征为一包含移位Tricomi算子的复合算子; 然后将壁板失稳方程的求解问题转化为定区间上的函数逼近问题; 最后, 依据Wererstrass定理并利用最小二乘法求解该最优函数, 以获得系统的失稳临界参数. 在试验研究中依据压杆稳定原理设计了壁板静态失稳的测试方法并完成了风洞实验. 理论分析结果表明, 壁板会发生发散(静气动弹性)失稳, 临界动压随壁板与壁面间距的增加而增大并最终趋于稳定(无壁面情况); 通过理论与风洞实验结果的对比分析, 验证了本文气动力及理论分析的适用性及准确性. 针对倒置悬臂壁板结构的气动弹性失稳问题, 本文提出的方法不涉及系统方程的离散及特征值求解问题, 而是将其转化为了定区间上的函数逼近问题进行求解, 这为弹性结构静气动弹性失稳问题的研究提供了一个可行的新思路.      

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

Static droplet array for the synthesis of nonspherical microparticles

We reported a manually operated static droplet array (SDA)-based device for the synthesis of nonspherical microparticles with different shapes. The improved SDA structure and reversible bonding between poly(dimethylsiloxane) (PDMS) were used in the device for the large-scale synthesis and rapid extraction of nonspherical microparticles. To understand the device physics, the effects of flow rate, SDA well size, and shape on droplet generation performances were explored. The results indicated that droplet generation in SDA structures was insensitive to the flow rate, and monodisperse droplets were generated by the SDA-based device through manually pushing the syringe. Finally, we integrated four kinds of SDA structures in one device and successfully realized the synthesis and extraction of nonspherical microparticles with different shapes and materials. Our SDA-based device offers numerous advantages, such as simple manual operation, low equipment cost, controllable microparticle shapes and sizes, and large-scale production. Thus, it holds the potential to be used as a flexible tool for the production of nonspherical microparticles.     

An investigation of the electron density of a Jahn–Teller‐distorted CrII cation: the crystal structure and charge density of hexakis(acetonitrile‐κN)chromium(II) bis(tetraphenylborate) acetonitrile disolvate

In the crystal structure of the title homoleptic Cr^II complex, [Cr(CH₃CN)₆](C₂₄H₂₀B)₂·CH₃CN, the [Cr(CH₃CN)₆]²⁺ cation is a high‐spin d⁴ complex with strong static, rather than dynamic, Jahn–Teller distortion. The electron density of the cation was determined by single‐crystal X‐ray refinements using aspherical structure factors from wavefunction calculations. The detailed picture of the electronic density allowed us to assess the extent and directionality of the Jahn–Teller distortion of the Cr^II cation away from idealized octahedral symmetry. The topological analysis of the aspherical d‐electron density about the Cr^II cation showed that there are significant valence charge concentrations along the axial Cr—N axes. Likewise, there were significant valence charge depletions about the Cr^II cation along the equatorial Cr—N bonds. These charge concentrations are in accordance with a Jahn–Teller‐distorted six‐coordinate complex.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.     

T300/648迭层板接头挤压疲劳损伤参数的选择与测定

本文对碳纤维增强复合材料迭层板(C.F.R.P)接头在不同环境条件下的挤压疲劳损伤扩展进行了实验研究.并根据“剩余强度,剩余刚度”理论和“疲劳模量”概念,讨论了接头的刚度下降和强度变化.由此提出了“损伤参数”D的定义和测量方法;并对损伤试件,进行了X射线检测分析,验证了累积损伤的扩展.     

光纤陀螺随机游走系数的分析研究

分析了产生随机游走误差的机理,分别采用有关标准和Allan方差进行了随机游走系数的分析和计算。结果表明:随机游走系数是衡量光纤陀螺噪声水平的重要指标,其值的大小体现了陀螺的极限精度。采用Allan方法表述光纤陀螺的静态指标,物理概念清晰,方法简便。     

结构静动力屈曲问题研究进展

近几十年来，结构的静动力屈曲问题一直是力学工作者极为关注的一个前沿课题．本文总结和综述了这一研究领域的几个基本问题：屈曲问题的分类、动态屈曲问题的特点及其特征量；介绍了屈曲问题的处理方法和目前已取得的成果；总结评述了人们关心的热点问题；屈曲问题的模型分析和实验技术、动态屈曲判别准则．     

有限元法在三轴转台机械系统设计中的应用

本文探讨了三轴转台机械系统的设计与计算问题，以惯性三轴测试转台和三轴模拟台为例，确定了多种运转状态下的有限元法计算模型，并对其进行了静、动态特性计算，比较分析了计算结果，为合理结构的设计提供了重要数据，说明了在三轴转台机械系统设计中有限元法的重要性