基于“真实情境与实际问题”的化学试题命制——以“碳九泄漏事故”为例

以“11·4福建泉港碳九泄漏事故”为测试载体，在深入挖掘和甄选考点后，结合当前《普通高中化学课程标准（2017年版）》对考试评价的有关说明和试题命制基本理论及技术要求，命制了一道高中化学考试试题，并在文中对试题的测试目标，如认知操作、核心素养和达到的学业质量水平加以详细分析，对试题命制的技术性要求辅以论证，以期能给同行以核心素养为测试宗旨的命题提供一些参考。     

Synergistic Effects of Pseudocolor Imaging,Differentiation, and Square and Logarithmic Conversion on Accuracy of Quantification of Chemical Characteristics Using Test Strips and Similar Products

Test strips and similar products are highly feasible tools for the rapid and approximate determination of chemical characteristics. Although the application of both the quantitative observation of coloration and regression modeling has recently enabled these products to become quantitative tools, their precision and accuracy may be further improved. In this study, the pseudocolor imaging of the coloration image, derivative spectrophotometry-like differentiation of the coloration values, and logarithmic conversion of the raw and derivative values were compared in terms of the precision and accuracy of the quantitative determination of corrosiveness, glucose, nitrate, and pH using the products. The best regression models for the determination were provided by the combination of pseudocolor imaging and differentiation (nitrate and pH); pseudocolor imaging, differentiation, and square-conversion (corrosiveness); or all of the techniques (glucose). When compared to the use of the original 10 raw coloration variables of red-green-blue, cyan-magenta-yellow-key black, and L*a*b* color models only, the above combinations improved the normalized mean absolute error from 14.8% to 3.09% (corrosiveness), 6.33% to 3.15% (glucose), 7.46% to 4.56% (nitrate), and 3.22% to 0.94% (pH). These achievements were largely attributed to the combination of multiple variables that have non-linear and nonmonotonic relationships with the chemical characteristics.     

Exploring the undrained cyclic behavior of methane-hydrate-bearing sediments using CFD–DEM

Based on the mechanical experimental results of methane hydrate (MH), a bond contact model considering the rate-dependency of MH is proposed. A CFD–DEM scheme considering fluid compressibility is used to simulate a series of undrained cyclic shear tests of numerical methane-hydrate-bearing sediment (MHBS) samples. The dynamic behavior, including stress–strain relationship, dynamic shear modulus, and damping ratio, is investigated. In addition, the force chains, contact fabric and averaged pure rotation rate (APR) are examined to investigate the relationships between micromechanical variables and macromechanical responses in the DEM MH samples. The effects of temperature, confining pressure and MH saturation are also analyzed. Due to the micro-structural strengthening by the MH bonds, no obvious change in microscopic quantities is observed, and the samples remain at the elastic stage under the applied low-shear stress level. When confining pressure and MH saturation increase, the dynamic elastic modulus increases, while the damping ratio decreases. An increasing temperature (leading to weakening of MH bonds) can lower the dynamic elastic modulus, but has almost no impact on the damping ratio. On the contrary, an increasing cyclic shear stress level lowers the damping ratio, but has almost no effect on the dynamic elastic modulus.     

石英玻璃圆环高速膨胀碎裂过程的离散元模拟

采用离散元算法模拟了石英玻璃圆环受到外加动态载荷时的力学行为. 首先基于flat-jointed粘结模型,通过标准的单轴拉压、三点弯曲等数值实验来标定了石英玻璃的微观参数. 在此模型基础上,数值模拟再现了石英玻璃圆环在不同应变率下的膨胀碎裂过程. 为定量分析数值模拟结果,需要准确确定圆环的碎裂发生时刻. 模拟发现:伴随着石英玻璃圆环的断裂,圆环外表面粒子径向膨胀速度的时程曲线会发生突然升高然后下降的跳动;详细分析表明,这种跳动源自周向的脆性断裂诱发的卸载波(周向拉伸应力急剧下降)以及伴随而来的泊松膨胀,这种径向速度跳动现象为实验中检测脆性断裂发生时刻提供了可能. 进一步的数值研究表明:(1)石英玻璃圆环的断裂应变随着应变率的提高而增大,与韧性金属材料的膨胀环实验结果一致;(2)石英玻璃圆环的碎片平均质量随着应变率的增大而减小;(3)数值计算获得的碎片平均尺寸与已有的理论和实验结果比较吻合. 利用液压膨胀环实验装置对石英玻璃圆环进行了验证性实验,回收得到的碎片形貌及碎片个数与数值模拟的结果基本一致.      

塔河油田超埋深碳酸盐岩油藏基质的力学试验研究

碳酸盐岩油气藏在全球范围内分布广泛,其中30%以上为缝洞型碳酸盐岩油气藏。在我国缝洞型油藏占已探明的碳酸盐岩油藏储量的2/3,是今后增储的主要领域。为准确揭示碳酸盐岩油藏基质的力学特性,本文以塔河油田奥陶系油藏地层为研究背景,通过现场深孔钻井取样得到埋深达5300~6200m的碳酸盐岩油藏基质岩样,并通过力学试验首次获得超埋深碳酸盐岩油藏基质的弹模、泊松比、抗压强度、抗拉强度、粘聚力、内摩擦角等力学参数,借助电镜扫描试验揭示出超埋深碳酸盐岩的微细观破裂机制。该项研究成果可为分析碳酸盐岩油藏溶洞的垮塌破坏机理提供有效的试验参数。     

Quantitative leak test for microholes and microtears in whole gloves and glove pieces

The current leak tests for gloves are qualitative. The developed quantitative leak test uses vacuum pressure to draw measured volumes of water to detect microholes/tears in whole gloves and glove pieces. A modified plastic vacuum desiccator interfaced with a Frazier air permeability tester allowed exposure of disposable unsupported/unlined/powderless Kimtech Blue nitrile to 50 mL of water for glove pieces or to 600 mL within a whole glove at vacua of 8–9 in. (20–23 cm) and 11–12 in. (28–30 cm) water gauge, respectively. Punctures of known dimensions were made before testing in specific glove areas using 21-, 22-, 26-, 30-, and 33-gauge needles (outer/inner diameters in micrometres of 873/514, 794/413, 635/311, 476/127, 318/159 and 238/133, respectively). The length of the punctures varied from 0.13 ± 0.01 to 0.80 ± 0.11 mm. Flow rates of water through the holes/tears ranged from 2.5 ± 0.4 to 106 ± 7 mL/min for glove pieces. For whole gloves, the ranges were from 31 ± 9 to 543 ± 110 mL/min in the palm area; and 0.23 ± 0.06 to 82 ± 18 mL/min in the finger/fingertip area. The method quantified tear lengths as short as 0.13 ± 0.01 mm.     

α-Mangostin exhibits antidepressant-like effects mediated by the modification of GABAergic,serotonergic and dopaminergic systems

Abstract

The present study explored the antidepressant-like activity of α-mangostin (α-MG) and the possible mechanism in this process in the tail suspension test (TST) in mice. The results revealed that α-MG (5?mg/kg, i.p.) exhibited markedly antidepressant-like activity, which could be reversed by pretreatment with haloperidol (a non-selective D₂ receptor antagonist), bicuculline (a competitive GABA antagonist), p-chlorophenylalanine (an inhibitor of 5-HT synthesis). Meanwhile, α-MG also effectively increased the brain DA, 5-HT and GABA levels in mice exposed to TST, indicating that the antidepressant-like effect of α-MG might be mediated by the GABAergic, serotonergic and dopaminergic systems.

     

估计感度分布中位数的两阶段优化序贯试验设计方法研究

感度试验在爆炸科学领域有非常广泛的应用,其中位数是含能材料的一个关键性能指标.高效估计感度分布中位数是实际工程应用中的重要问题.文章提出一种两阶段的优化序贯试验设计方法来估计感度分布的中位数,并将正交设计与两阶段优化序贯试验设计方法相结合给出了筛选影响含能材料安定性重要因子的试验设计方法.广泛的模拟比较验证了所提方法在小样本情况下可以获得感度分布中位数的准确估计,并且对模型假设和初始参数猜测具有一定的稳健性.当因子效应不是太小的时候,因子筛选方法可以准确地筛选出有显著影响的因子.     

用于SCA ASIC测试的数字读出模块设计

高速开关电容阵列(SCA)具有高速采样、低功耗的特点,基于SCA的高速波形数字化是目前高精度时间测量的一个重要研究方向。为此,我们开展SCA芯片的研究,目前已设计完成原型ASIC设计,并正在进行后续版本的改进设计。为便于未来多版本ASIC的测试和评估,需设计具有一定通用性的数字读出模块,本论文工作主要介绍此模块的设计工作以及相应的数据读出软件。数字读出模块基于FPGA实现对待测ASIC的控制、配置及数据读出,采用DDR3片外存储芯片,使用USB3.0等接口进行数据传输;上位机软件基于Python3.7设计,实现了数据采集与波形绘制等功能。目前已使用设计完成的数字读出模块对第2版SCA ASIC进行了初步的测试,测试结果表明,此读出模块工作正常,且SCA芯片输出结果符合预期。     

化学实验操作技能测试评分者效应研究*

基于Rasch模型对化学实验操作技能测试的评分者效应开展研究。通过对Infit、Outfit、t、怀特图和宽严度波动图等的分析,研究测试中评委的宽严度、内部一致性、外部一致性以及评委与考生间的偏差规律。得到系列减弱化学实验操作技能测试中评分者效应的建议。