Dynamical analysis,circuit realization,and application in pseudorandom number generators of a fractional-order laser chaotic system

A new five-dimensional fractional-order laser chaotic system (FOLCS) is constructed by incorporating complex variables and fractional calculus into a Lorentz-Haken-type laser system. Dynamical behavior of the system, circuit realization and application in pseudorandom number generators are studied. Many types of multi-stable states are discovered in the system. Interestingly, there are two types of state transition phenomena in the system, one is the chaotic state degenerates to a periodical state, and the other is the intermittent chaotic oscillation. In addition, the complexity of the system when two parameters change simultaneously is measured by the spectral entropy algorithm. Moreover, a digital circuit is design and the chaotic oscillation behaviors of the system are verified on this circuit. Finally, a pseudo-random sequence generator is designed using the FOLCS, and the statistical characteristics of the generated pseudo-random sequence are tested with the NIST-800-22. This study enriches the research on the dynamics and applications of FOLCS.     

基于SOLO分类理论以教材为素材的命题实践研究——以“有机合成路线图题”为例

以有机合成路线图题的命制为例，展示如何挖掘并整合教材内容为命题素材，如何基于SOLO分类理论进行设问而命制成试题。     

第32届中国化学奥林匹克初赛有机试题详解

利用框图全面归纳了第32届全国化学奥林匹克竞赛（初赛）有机试题的考点分布，并对考题进行了详细解析，以帮助致力于参加高中化学竞赛的考生取得优异成绩。     

Exploring the undrained cyclic behavior of methane-hydrate-bearing sediments using CFD–DEM

Based on the mechanical experimental results of methane hydrate (MH), a bond contact model considering the rate-dependency of MH is proposed. A CFD–DEM scheme considering fluid compressibility is used to simulate a series of undrained cyclic shear tests of numerical methane-hydrate-bearing sediment (MHBS) samples. The dynamic behavior, including stress–strain relationship, dynamic shear modulus, and damping ratio, is investigated. In addition, the force chains, contact fabric and averaged pure rotation rate (APR) are examined to investigate the relationships between micromechanical variables and macromechanical responses in the DEM MH samples. The effects of temperature, confining pressure and MH saturation are also analyzed. Due to the micro-structural strengthening by the MH bonds, no obvious change in microscopic quantities is observed, and the samples remain at the elastic stage under the applied low-shear stress level. When confining pressure and MH saturation increase, the dynamic elastic modulus increases, while the damping ratio decreases. An increasing temperature (leading to weakening of MH bonds) can lower the dynamic elastic modulus, but has almost no impact on the damping ratio. On the contrary, an increasing cyclic shear stress level lowers the damping ratio, but has almost no effect on the dynamic elastic modulus.     

用于SCA ASIC测试的数字读出模块设计

高速开关电容阵列(SCA)具有高速采样、低功耗的特点,基于SCA的高速波形数字化是目前高精度时间测量的一个重要研究方向。为此,我们开展SCA芯片的研究,目前已设计完成原型ASIC设计,并正在进行后续版本的改进设计。为便于未来多版本ASIC的测试和评估,需设计具有一定通用性的数字读出模块,本论文工作主要介绍此模块的设计工作以及相应的数据读出软件。数字读出模块基于FPGA实现对待测ASIC的控制、配置及数据读出,采用DDR3片外存储芯片,使用USB3.0等接口进行数据传输;上位机软件基于Python3.7设计,实现了数据采集与波形绘制等功能。目前已使用设计完成的数字读出模块对第2版SCA ASIC进行了初步的测试,测试结果表明,此读出模块工作正常,且SCA芯片输出结果符合预期。     

Dynamical Analysis of a New Chaotic Fractional Discrete-Time System and Its Control

This article proposes a new fractional-order discrete-time chaotic system, without equilibria, included two quadratic nonlinearities terms. The dynamics of this system were experimentally investigated via bifurcation diagrams and largest Lyapunov exponent. Besides, some chaotic tests such as the 0–1 test and approximate entropy (ApEn) were included to detect the performance of our numerical results. Furthermore, a valid control method of stabilization is introduced to regulate the proposed system in such a way as to force all its states to adaptively tend toward the equilibrium point at zero. All theoretical findings in this work have been verified numerically using MATLAB software package.     

Using a Novel and Easy-to-Use Sandwich Structure Device to Evaluate the Cooling Properties of Cool Materials

A number of cool materials have been designed and used in hot weather to minimize the heat coming from sunlight. Traditionally, solar reflectance and infrared emittance were measured to characterize the cooling properties of cool materials. However, these methods could represent the cooling property only indirectly. In this work, a sandwich structure device that can straightforwardly measure the cooling properties of cool materials was designed. Two cool materials, including high-density polyethylene (HDPE) and polyvinyl chloride (PVC), were selected to verify the device. For the purpose of comparison, UV-vis-NIR spectral characterization was also used to evaluate the cooling properties of the selected materials. The results, especially for the HDPE/Green 260 composite sample, which presents much lower solar reflectance but better cooling property, indicated that the cooling properties cannot be entirely represented by only the reflectance or transmittance, and the sandwich structure device was able to make up for this deficiency.     

塔河油田超埋深碳酸盐岩油藏基质的力学试验研究

碳酸盐岩油气藏在全球范围内分布广泛,其中30%以上为缝洞型碳酸盐岩油气藏。在我国缝洞型油藏占已探明的碳酸盐岩油藏储量的2/3,是今后增储的主要领域。为准确揭示碳酸盐岩油藏基质的力学特性,本文以塔河油田奥陶系油藏地层为研究背景,通过现场深孔钻井取样得到埋深达5300~6200m的碳酸盐岩油藏基质岩样,并通过力学试验首次获得超埋深碳酸盐岩油藏基质的弹模、泊松比、抗压强度、抗拉强度、粘聚力、内摩擦角等力学参数,借助电镜扫描试验揭示出超埋深碳酸盐岩的微细观破裂机制。该项研究成果可为分析碳酸盐岩油藏溶洞的垮塌破坏机理提供有效的试验参数。     

大豆脲酶诱导碳酸钙沉淀的多因素影响分析

本文探究了多个影响因素对大豆脲酶诱导碳酸钙沉淀(SICP)的影响,以优选出主要影响因素并提供其最佳范围。首先分析了脲酶浓度和温度对脲酶活性的影响;之后通过正交实验设计,进行25种工况的SICP水溶液实验,研究不同因素组合下Ca²⁺利用率的变化规律;最后借助扫描电子显微镜观测不同工况下生成碳酸钙的形态。结果表明:低温有利于脲酶的保存及活性发挥,5 ℃时脲酶活性能保持21 d以上;同一温度下,脲酶浓度越大,脲酶初始活性越高,脲酶完全失活所需时间越短。pH值、脲酶与胶结液体积比是影响Ca²⁺利用率的主要因素。为达到较高的Ca²⁺利用率,脲酶和胶结液最佳体积比为1,氯化钙与尿素最佳浓度比为1.5,Ca²⁺最佳浓度为1 mol/L。当脲酶浓度较低时生成的六面体状碳酸钙较多;随着脲酶浓度的增大,所沉淀的碳酸钙向球形转变。大豆中富含的天冬氨酸是控制碳酸钙形态的重要因素。     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931