Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region

We performed laboratory experiments on bubbly channel flows using silicone oil, which has a low surface tension and clean interface to bubbles, as a test fluid to evaluate the wall shear stress modification for different regimes of bubble migration status. The channel Reynolds numbers of the flow ranged from 1000 to 5000, covering laminar, transition and turbulent flow regimes. The bubble deformation and swarms were classified as packing, film, foam, dispersed, and stretched states based on visualization of bubbles as a bulk void fraction changed. In the dispersed and film states, the wall shear stress reduced by 9% from that in the single-phase condition; by contrast, the wall shear stress increased in the stretched, packing, and foam states. We carried out statistical analysis of the time-series of the wall shear stress in the transition and turbulent-flow regimes. Variations of the PDF of the shear stress and the higher order moments in the statistic indicated that the injection of bubbles generated pseudo-turbulence in the transition regime and suppressed drag-inducing events in the turbulent regime. Bubble images and measurements of shear stress revealed a correlated wave with a time lag, for which we discuss associated to the bubble dynamics and effective viscosity of the bubble mixture in wall proximity.     

Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

简支及悬臂箱梁在角隅轴向荷载作用下的翼板纵向应力

基于能量变分原理，拟定轴向荷载作用下箱梁的纵向位移函数，得到关于翼板剪切变形引起的位移差函数的基本微分方程，继而推导出箱梁翼板纵向应力表达式，并首次得出角隅轴向荷载作用下翼板出现应力不均匀分布的荷载及边界条件。通过对一模型箱梁进行计算，并与通用有限元软件ANSYS壳单元计算结果进行比较，验证了该方法和所推导公式的正确性。研究结果表明，当作用于简支箱梁截面角隅处的轴向荷载（合力无偏心）为集中或分布荷载时，翼板不产生纵向应力不均匀现象；当作用于悬臂箱梁截面角隅处的轴向荷载（合力无偏心）为集中荷载时，翼板不产生纵向应力不均匀现象，而当荷载轴向分布时，翼板将产生纵向应力不均匀现象。实际工程中，横力弯曲使悬臂箱梁产生剪力滞效应，这种效应会与轴向分布荷载产生的效应叠加，设计时对此应予以充分考虑。     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

Modeling and character analyzing of multiple fractional-order memcapacitors in parallel connection

Recently,the memory elements-based circuits have been addressed frequently in the nonlinear circuit theory due to their unique behaviors.Thus,the modeling and characterizing of the mem-elements become essential.In this paper,the analysis of the multiple fractional-order voltage-controlled memcapacitors model in parallel connection is studied.Firstly,two fractional-order memcapacitors are connected in parallel,the equivalent model is derived,and the characteristic of the equivalent memcapacitor is analyzed in positive or negative connection.Then a new understanding manner according to different rate factor K and fractional orderαis derived to explain the equivalent modeling structure conveniently.Additionally,the negative order appears,which is a consequence of the combination of memcapacitors in different directions.Meanwhile,the equivalent parallel memcapacitance has been drawn to determine that multiple fractional-order memcapacitors could be calculated as one composite memcapacitor.Thus,an arbitrary fractional-order equivalent memcapacitor could be constructed by multiple fractional-order memcapacitors.     

基于集对分析联系数的区间数型多属性决策投影模型及其在基坑支护方案评价中的应用

多属性决策时因掌握的信息有限,加之问题本身的复杂性、不确定性以及人类思维的模糊性,其属性的精确值往往难以获取,常用区间数形式表示针对多属性决策中各指标区间数不能直接进行大小比较的问题,提出一种基于集对分析联系数的区间数型多属性决策投影模型.模型用备择方案在理想方案上的投影进行集结,根据区间数的误差分布形式,沟通区间数与联系数的关系,根据a+bi型联系数大小比较法则,综合评价方案优劣.以某大厦基坑支护拟用的4种方案优化选择为例,说明方法的应用与模糊优化理论模型和灰色物元分析优化模型进行了对比,得到的结果一致.     

Heterogeneous/homogeneous and inclined magnetic aspect of infinite shear rate viscosity model of Carreau fluid with nanoscale heat transport

The study of the inclined flow along with the heterogeneous/homogeneous reactions in the fluid has been widely used in many industrial and engineering applications, such as petrochemical, pharmaceutical, materials science, heat exchanger design, fluid flow through porous media, etc. The purpose of this study is to present an infinite shear rate viscosity model using the inclined Carreau fluid with nanoscale heat transport. The model considers the effect of inclined angle on the fluid’s viscosity and the transfer of heat at the nanoscale. The result shows that the viscosity of the fluid decreases by increasing the inclination angle and the coefficient of heat transfer also increases with the inclination. The model can be used to predict the viscosity and heat transfer fluid’s behavior in the inclined systems that is widely used in the industrial and engineering applications. The results provide a better understanding of the inclined flow behavior of fluids and the heat transfer at the nanoscale, which can be useful in heat exchanger design, fluid flow through porous media, etc. Greater Infinite shear rate viscosity parameter gives the higher magnitude of Carreau fluid velocity. Moreover, inclined magnetic field reduces the velocity due to Lorentz force. Two numerical schemes are used to solve the model, BVP4C and Shooting.