Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

Accelerated quasicontinuum: a practical perspective on hyper-QC with application to nanoindentation

Abstract

Hyper-QC is a multiscale method based on the quasicontinuum (QC) method in which time is accelerated using hyperdynamics through the addition of a suitable bias potential. This paper describes the practical details of implementing and carrying out hyper-QC simulations and introduces a novel mechanism-based bias potential for deformation processes in face-centred cubic (fcc) systems. The factors limiting the maximum achievable acceleration are discussed. The method is demonstrated for nanoindentation into a thin film of single crystal fcc nickel at near experimental loading rates. Speed up factors as high as 10,000 are achieved. The simulations reveal a thermally activated dislocation nucleation mechanism with a logarithmic dependence on temperature and indenter velocity in agreement with a theoretical model.     

Nanoindentation as a Probe for Mechanically‐Induced Molecular Migration in Layered Organic Donor–Acceptor Complexes

Nanoindentation and scratch experiments on 1:1 donor–acceptor complexes, 1 and 2 , of 1,2,4,5‐tetracyanobenzene with pyrene and phenanthrene, respectively, reveal long‐range molecular layer gliding and large interaction anisotropy. Due to the layered arrangements in these crystals, these experiments that apply stress in particular directions result in the breaking of interlayer interactions, thus allowing molecular sheets to glide over one another with ease. Complex 1 has a layered crystal packing wherein the layers are 68° skew under the (002) face and the interlayer space is stabilized by van der Waals interactions. Upon indenting this surface with a Berkovich tip, pile‐up of material was observed on just one side of the indenter due to the close angular alignment of the layers with the half angle of the indenter tip (65.35°). The interfacial differences in the elastic modulus (21 %) and hardness (16 %) demonstrate the anisotropic nature of crystal packing. In 2 , the molecular stacks are arranged in a staggered manner; there is no layer arrangement, and the interlayer stabilization involves C? H???N hydrogen bonds and π???π interactions. This results in a higher modulus (20 %) for (020) as compared to (001), although the anisotropy in hardness is minimal (4 %). The anisotropy within a face was analyzed using AFM image scans and the coefficient of friction of four orthogonal nanoscratches on the cleavage planes of 1 and 2 . A higher friction coefficient was obtained for 2 as compared to 1 even in the cleavage direction due to the presence of hydrogen bonds in the interlayer region making the tip movement more hindered.     

Local strain and defects in silicon wafers due to nanoindentation revealed by full‐field X‐ray microdiffraction imaging

Quantitative characterization of local strain in silicon wafers is critical in view of issues such as wafer handling during manufacturing and strain engineering. In this work, full‐field X‐ray microdiffraction imaging using synchrotron radiation is employed to investigate the long‐range distribution of strain fields in silicon wafers induced by indents under different conditions in order to simulate wafer fabrication damage. The technique provides a detailed quantitative mapping of strain and defect characterization at the micrometer spatial resolution and holds some advantages over conventional methods.     

氮化钛沉积膜的摩擦性能研究

采用等离子电弧沉积法在9Crl8钢表面制备了厚约0．5μm的TiN薄膜，通过显微硬度测试以及纳米压痕和纳米划痕试验，对比考察了9Crl8钢及其表面T|N薄膜的机械和摩擦性能．结果表明，9Crl8钢及其表面T．N沉积膜的纳米硬度分别为8GPa和38GPa，弹性模量分别为250GPa和580GPa，9Crl8、TiN和有机薄膜的摩擦系数分别为0．40、0．12和0．10；TiN沉积膜可显著提高基体钢的承载和耐磨能力．     

Effect of Pt on interdiffusion and mechanical properties of the γ and γ′ phases in the Ni–Pt–Al system

The effect of Pt on the growth kinetics of the γ′-[Ni(Pt)]₃Al ordered intermetallic phase and the γ-Ni(Pt, Al) solid solution diffusion rates of the species, hardness and elastic modulus was examined by employing the diffusion couple experimental technique. Experiments were conducted by using the β-Ni(Pt)Al phase and Ni(Pt) alloy couples, each of which had a fixed amount of Pt (5, 10 and 15 at. %) in both the end members so that the Pt content is more or less constant throughout the interdiffusion zone. The results suggest that the growth kinetics of both phases and the average effective interdiffusion coefficients of Ni and Al increase with the increase in Pt content. Nanoindentation studies across the compositional gradients show that the mechanical properties of the intermetallic phase in the superalloy are relatively insensitive to the presence of Pt but are more sensitive to the Ni/Al ratio. In contrast, the marked variation in the hardness of the γ phase were noted, increasing markedly with Al concentration in a given couple and also increasing with increasing Pt content. Possible causes for the observed variations are discussed.     

The Cytotoxic Effect of α-Synuclein Aggregates

Parkinson's disease is a neurodegenerative disorder involving a functional protein, α-synuclein, whose primary function is related to vesicle trafficking. However, α-synuclein is prone to form aggregates, and these inclusions, known as Lewy bodies, are the hallmark of Parkinson's disease. α-synuclein can alter its conformation and acquire aggregating capacity, forming aggregates containing β-sheets. This protein's pathogenic importance is based on its ability to form oligomers that impair synaptic transmission and neuronal function by increasing membrane permeability and altering homeostasis, generating a deleterious effect over cells. First, we establish that oligomers interfere with the mechanical properties of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) membrane, as demonstrated by nanoindentation curves. In contrast, nanoindentation revealed that the α-synuclein monomer's presence leads to a much more resistant lipid bilayer. Moreover, the oligomers’ interaction with cell membranes can promote lactate dehydrogenase (LDH) release, suggesting the activation of cytotoxic events.     

Viscoelastic properties of nanosilica‐filled epoxy composites investigated by dynamic nanoindentation

The viscoelastic properties of the epoxy filled with silica nanoparicles have been investigated by dynamic nanoindentation and characterized by the storage modulus and loss tangent. The materials studied are neat epoxy and silica/epoxy composites with silica volume fraction of 1, 3, 6, 10, and 14 vol %, respectively. The silica nanoparticles with an average diameter of 25 nm are found to disperse homogeneously in the epoxy matrix. The effect of the particle content, force frequency, and penetration load on the viscoelastic behavior is studied and discussed. The comparison with traditional testing methods such as tension, bending, and DMTA is made. Besides, theoretical results by using micromechanics models are also obtained and compared with the experimental results. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1030–1038, 2009     

基于分数阶流变模型的铁基块体非晶合金黏弹性行为研究

采用分数阶黏弹单元替代经典模型中的黏壶, 结合非晶合金在外加载荷作用下的微观结构演化, 建立了以分数阶微积分表示的非晶合金黏弹性本构模型. 并根据Hertz弹性理论及分数阶黏弹性本构模型, 推导了块体非晶合金在纳米压痕球形压头下的位移与载荷及时间关系式. 基于推导的解析式, 对铁基块体非晶合金在表观弹性区的纳米压痕位移与载荷及时间曲线进行了非线性拟合分析. 相较于整数阶模型, 分数阶模型不仅具有较高的拟合精度, 其拟合参数能敏锐地反应加载速率对块体非晶合金黏弹性行为的影响, 且参数的变化规律与载荷作用下非晶合金微观结构演化呈现出较强的相关性.