A new endocytic model based on the co-rotational grid method

Endocytosis plays important roles in many cellular physiological processes, such as metabolism and immune. Many theoretical models have been proposed to study the endocytic process, but little has considered the tensile deformation of the membrane and the actin forces. In this paper, a new endocytic model is proposed based on the co-rotational grid method. Our model gives a direct estimation of the in-plane strain of the plasma membrane and provides a basis for the calculation of further scission process of the vesicle. The results fit well with experimental data in the literature. Moreover, it is suggested that the active forces of actin at the endocytic site is the main mechanism driving the invagination of the plasma membrane.     

Characteristic behaviour of plasma fluctuations inside a plasma bubble in presence of a magnetic field due to the formation of a potential well

Experiments were carried out to observe the effect of a magnetic field and grid biasing voltage in presence of a plasma bubble in a magnetized, filamentary discharge plasma system. A spherical mesh grid of 80% optical transparency was negatively biased and introduced into the plasma for creating a plasma bubble. Diagnostics via an electrical Langmuir probe and a hot emissive probe were extensively used for scanning the plasma bubble. Plasma floating potential fluctuations were measured at three different positions of the plasma bubble. The instability in the pattern showed the dynamic transition from periodic to chaotic for increasing magnetic fields. Time scale analysis using continuous wavelet transform was carried out to identify the presence of non‐linearity from the contour plots. The mechanisms of the low‐frequency instabilities along with the transition to chaos could be qualitatively explained. Non‐linear techniques such as fast Fourier transform, phase space plot, and recurrence plot were used to explore the dynamics of the system appearing during plasma fluctuations. In order to demonstrate the observed chaotic phenomena in this study, characteristics of chaos such as the Lyapunov exponent were obtained from experimental time series data. The experimentally observed potential structure is confirmed with numerical analysis based on fluid hydrodynamics.     

A 3D mesh deformation technique for irregular in‐flight ice accretion

Aircraft holding around busy airports may be requested to sustain as much as 45 min of icing before landing or being diverted to another airport. In this paper, a three‐dimensional mesh deformation scheme, based on a structural frame analogy, is proposed for the numerical simulation of ice accretion during extended exposure to adverse weather conditions. The goal is to provide an approach that is robust and efficient enough to delay or altogether avoid re‐meshing while preserving (enforcing) nearly orthogonal elements at the highly distorted ice surface. Robustness is achieved by suitably modifying the axial and torsional stiffness components of the frame elements in order to handle large and irregular grid displacements typical of in‐flight icing. Computational efficiency is obtained by applying the mesh displacement to an automatically selected small subset of the entire computational domain. The methodology is validated first in the case of deformations typical of fluid‐structure interaction problems, including wing bending, a helicopter rotor in forward flight, and the twisting of a high‐lift wing configuration. The approach is then assessed for aero‐icing on two swept wings and compared against experimental measurements where available. Copyright © 2015 John Wiley & Sons, Ltd.     

适用于等熵流动的交错拉氏Godunov方法

为消除传统单元中心型Godunov方法在求解稀疏波问题时的非物理过热现象，发展一种适用于等熵流动的交错拉氏Godunov方法.主要的特征是采用速度与热力学变量交错分布的形式，避免在单元内进行速度平均，从而消除由于动量平均过程导致的动能耗散.与传统的von Neumann型交错网格方法相比，网格的边界通量由节点处的多维黎曼求解器提供，克服了多维人工粘性选取带来的困难.为减少多维黎曼求解器在求解稀疏波问题时的非物理熵增，给出稀疏波出现的合理判据，从而保证了热力学关系式的满足.数值实验表明：该方法能很好地消除稀疏波的过热现象，同时在求解激波问题时又能保持与传统单元中心型拉氏方法相同的激波捕捉能力.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.     

The Application of Fractal Transform and Entropy for Improving Fault Tolerance and Load Balancing in Grid Computing Environments

This paper applies the entropy-based fractal indexing scheme that enables the grid environment for fast indexing and querying. It addresses the issue of fault tolerance and load balancing-based fractal management to make computational grids more effective and reliable. A fractal dimension of a cloud of points gives an estimate of the intrinsic dimensionality of the data in that space. The main drawback of this technique is the long computing time. The main contribution of the suggested work is to investigate the effect of fractal transform by adding R-tree index structure-based entropy to existing grid computing models to obtain a balanced infrastructure with minimal fault. In this regard, the presented work is going to extend the commonly scheduling algorithms that are built based on the physical grid structure to a reduced logical network. The objective of this logical network is to reduce the searching in the grid paths according to arrival time rate and path’s bandwidth with respect to load balance and fault tolerance, respectively. Furthermore, an optimization searching technique is utilized to enhance the grid performance by investigating the optimum number of nodes extracted from the logical grid. The experimental results indicated that the proposed model has better execution time, throughput, makespan, latency, load balancing, and success rate.     

Infrared thermographic evaluation of large composite grid parts subjected to axial loading

Many composite parts, such as laminated panels and grid-like shells, operate under high mechanical loading. Evaluation of their structural integrity is crucial to ensure the long-lasting operation of critical components. Since testing a structure under full or “proof” load might be dangerous for personnel, it would be preferable to use a remote, rapid inspection technique. This paper describes a practical application of IR thermography to the inspection of large composite parts used in the aerospace industry. This work has used just one cycle of increasing load from zero load to failure, and this was done for both for tensile and compressive loads. It is shown that, during the formation of micro-defects in polymeric composites, about 40 % of the total dissipated energy is expended for material heating, while about 60 % is related to material damage accompanied by an increase in the defect concentration. Non-uniform composite deformation causes temperature anomalies, whose amplitude may reach 1.5–2.5 °C at a load of about 50–60 % of the limit load.     

Local and parallel finite element algorithm for stationary incompressible magnetohydrodynamics

This article presents a local and parallel finite element method for the stationary incompressible magnetohydrodynamics problem. The key idea of this algorithm comes from the two‐grid discretization technique. Specifically, we solve the nonlinear system on a global coarse mesh, and then solve a series of linear problems on several subdomains in parallel. Furthermore, local a priori estimates are obtained on a general shape regular grid. The efficiency of the algorithm is also illustrated by some numerical experiments.© 2017 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 1513–1539, 2017     

模糊AHP在电网企业员工岗前培训评估中的应用

电网企业技术密集、人员众多、架构庞大,员工岗前培训与企业健康持续发展密不可分.培训工作中最突出的问题在于对培训效果缺乏合理的评估,从而无法了解企业投资的效果,以及培训对组织的贡献.以柯氏培训四级评估模型为基础,采用模糊AHP规范化整个评估过程.最后以电力企业进行的培训项目为例验证分析,证明所提算法的有效性.