水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

Domain-based local pair natural orbital methods within the correlation consistent composite approach

Ab initio composite approaches have been utilized to model and predict main group thermochemistry within 1 kcal mol⁻¹, on average, from well-established reliable experiments, primarily for molecules with less than 30 atoms. For molecules of increasing size and complexity, such as biomolecular complexes, composite methodologies have been limited in their application. Therefore, the domain-based local pair natural orbital (DLPNO) methods have been implemented within the correlation consistent composite approach (ccCA) framework, namely DLPNO-ccCA, to reduce the computational cost (disk space, CPU (central processing unit) time, memory) and predict energetic properties such as enthalpies of formation, noncovalent interactions, and conformation energies for organic biomolecular complexes including one of the largest molecules examined via composite strategies, within 1 kcal mol⁻¹, after calibration with 119 molecules and a set of linear alkanes. © 2019 Wiley Periodicals, Inc.     

Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

Carbon Nanotube‐phenolic Resin Composite Electrode Fabricated by Far Infrared‐assisted Crosslinking for Enhanced Amperometric Detection

The composite of carbon nanotube (CNT) and phenolic resin was prepared in a piece of fused silica capillary based on the far infrared‐assisted crosslinking of phenolic novolac resin in the presence of CNTs and hexamethylenetetramine for electrochemical sensing. The surface morphology and structure of the prepared materials were investigated by scanning electron microscopy, energy dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy. The results indicated that CNTs in the composite was adhered by the crosslinked phenolic resin to form an electrically conductive network. Many broken ends of CNTs appeared on the surface of the composite electrode in the form of a nanoelectrode array. The novel electrode was employed in the amperometric detection of synephrine and hesperidin in Citri Reticulatae Pericarpium in combination with capillary zone electrophoresis. The novel CNT‐based electrode owned the advantages of high sensitivity, low fabrication expense and excellent electrocatalytic performances, indicating great promise for the electrochemical detection in other analysis systems.     

Pull-in Instability Analysis of Nanoelectromechanical Rectangular Plates Including the Intermolecular,Hydrostatic, and Thermal Actuations Using an Analytical Solution Methodology

The current paper presents a thorough study on the pull-in instability of nanoelectromechanical rectangular plates under intermolecular, hydrostatic, and thermal actuations. Based on the Kirchhoff theory along with Eringen's nonlocal elasticity theory, a nonclassical model is developed. Using the Galerkin method(GM), the governing equation which is a nonlinear partial differential equation(NLPDE) of the fourth order is converted to a nonlinear ordinary differential equation(NLODE) in the time domain. Then, the reduced NLODE is solved analytically by means of the homotopy analysis method. At the end, the effects of model parameters as well as the nonlocal parameter on the deflection, nonlinear frequency, and dynamic pull-in voltage are explored.     

原位合成Bi3O4Br/Bi12O17Br2光催化剂及其对磺胺甲噁唑降解性能

Bi_xO_yBr_z光催化剂在有机药物废水处理领域有着非常广阔的潜在应用价值,但因光生电子和空穴的快速复合而表现出较低的光催化效率,进而限制了其应用范围。通过简易的水解-焙烧法原位制得一种新型的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂,并以磺胺甲噁唑(SMX)为模拟药物污染物进行了光催化性能测试,对所制催化剂进行了X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、电化学阻抗(EIS)、光致发光光谱(PL)等表征。结果表明所制备的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂具有较强的光生载流子分离率、较低的界面电荷转移电阻,进而展示出优异的光催化降解SMX性能,在模拟太阳光下照射30 min,SMX降解率达到87%,相较于纯的Bi₃O₄Br和Bi₁₂O₁₇Br₂催化剂,降解率分别提升了30%和24%。最后基于自由基捕获实验和催化剂能带结构分析了所制催化剂的降解机理。     

Nickel(II) cluster‐based mixed‐cation coordination polymer synthesized from 2‐mercaptobenzoic acid and its application

High‐nuclearity metal clusters have received considerable attention not only because of their diverse architectures and topologies, but also because of their potential applications as functional materials in many fields. To explore new types of clusters and their potential applications, a new nickel(II) cluster‐based mixed‐cation coordination polymer, namely poly[hexakis[μ₄‐(2‐carboxylatophenyl)sulfanido]di‐μ₃‐chlorido‐tri‐μ₂‐hydroxido‐octanickel(II)sodium(I)], [Ni₈NaCl₂(OH)₃(C₇H₄O₂S)₆]_n, 1 , was synthesized using nickel chloride hexahydrate and mercaptobenzoic acid (H₂mba) as starting reactants under hydrothermal conditions. The material was characterized by single‐crystal X‐ray diffraction (SCXRD), Fourier transform IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction and X‐ray photoelectron spectroscopy analysis. SCXRD shows that 1 consists of a hexanuclear nickel(II) [Ni₆] cluster, dinuclear Ni^II nodes and a mononuclear Na^I node, resulting in the formation of a complex covalent three‐dimensional network. In addition, a tightly packed NiO/C&S nanocomposite is fabricated by sintering the coordination precursor at 400 °C. The uniform nanocomposite consists of NiO nanoparticles, incompletely carbonized carbon and incompletely vulcanized sulfur. When used as a supercapacitor electrode, the synthesized composite shows an extra‐long cycling stability (>5000 cycles) during the charge/discharge process.     

Self‐assembled polyurea macromer nanodispersion and resulting hybrid polyurea‐acrylic emulsions and films

A polyurea macromer (PUM) was synthesized and dispersed in basic conditions to form self‐assembled nanoparticles (<20 nm dispersions, up to 30 wt % aq. soln.). These nanoparticles enabled surfactant‐free emulsion polymerization to form hybrid polyurea‐acrylic particles despite the absence of a measureable water‐soluble fraction. The T_g of the starting PUM material was a strong function of the PUM's extent of neutralization and hydration (varying between 100 °C and >175 °C) due to changes in hydrogen and ionic bonding. Two separate hybrid polyurea‐acrylic emulsion systems were prepared: one by direct polymerization of (meth)acrylic monomers in the presence of the nanodispersion and a second by a physical blend of PUM nanodispersion with an acrylic latex control. The direct polymerization method resulted in a hybrid emulsion particle size that developed by a mechanism resembling conventional emulsion polymerization and was unlike that described for seeded polyurethane dispersion systems. Film hardness was shown to increase with increasing coating thickness for the hybrid film prepared by direct polymerization. The resulting mechanical properties could be explained by applying mechanical models for a composite foam structure. These results were unprecedented for normal elastomer films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1373–1388     

4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Influence of the Si–O–C interplayer on the flexural behaviors of C/Si–C–N composites

Carbon fiber reinforced Si–C–N matrix composite(C/Si–C–N) with a Si–O–C interlayer (C/Si–O–C/Si–C–N) was fabricated via CVI and PIP process. The flexural behaviors of C/Si–O–C/Si–C–N were investigated using the three-point-bending method and the SEM technique. The results indicated that the flexural strengh of the C/Si–O–C/Si–C–N increases with increasing temperature and the modulus of the composite is essentially unchanged. The strength of C/Si–O–C/Si–C–N is comparable to that of C/PyC/Si–C–N, and the role of Si–O–C interlayer in C/Si–C–N can rival that of the PyC interlayer. The weaker interfacial bonding and the larger thickness of Si–O–C interlayer make a contribution to this at RT while the thinner interlayer and unstable structure of Si–O–C interphase do it above 1300 °C.