石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

石墨基液流电池复合双极板

液流电池是一种安全性高、使用寿命长、可扩展的大规模储能系统,可以协助电网调峰储能,提高能源利用率,发展前景广阔。双极板是液流电池的重要组成部分。功能上起到了分隔、串联电池、传导电流、为电堆提供结构支撑等作用。从成本构成角度看,双极板的价格占电堆成本的比重也较大。开发高性能、低成本的双极板对加快液流电池的商业化应用具有重要意义,也是目前业界的迫切需求。虽然文献上报道了许多针对液流电池双极板开发的工作,但是目前高性能、低成本的液流电池双极板产品仍无法充分满足市场需求。本文着重介绍了石墨基复合双极板的研究现状,介绍了材料选择、工艺流程对关键性能的影响,对相关工作进行了评述,并为液流电池双极板的开发提出了建议。     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

Domain-based local pair natural orbital methods within the correlation consistent composite approach

Ab initio composite approaches have been utilized to model and predict main group thermochemistry within 1 kcal mol⁻¹, on average, from well-established reliable experiments, primarily for molecules with less than 30 atoms. For molecules of increasing size and complexity, such as biomolecular complexes, composite methodologies have been limited in their application. Therefore, the domain-based local pair natural orbital (DLPNO) methods have been implemented within the correlation consistent composite approach (ccCA) framework, namely DLPNO-ccCA, to reduce the computational cost (disk space, CPU (central processing unit) time, memory) and predict energetic properties such as enthalpies of formation, noncovalent interactions, and conformation energies for organic biomolecular complexes including one of the largest molecules examined via composite strategies, within 1 kcal mol⁻¹, after calibration with 119 molecules and a set of linear alkanes. © 2019 Wiley Periodicals, Inc.     

薄板结构加筋布局优化设计方法研究

提出一种两步优化策略，以加筋板结构的固有频率最大化为目标函数，以结构所受外载荷作用的最大静变形为约束条件，开展薄板结构加筋构件的布局优化设计研究。为了降低加筋布局优化的难度，提高优化设计的效率，将加筋等效为一系列弹性铰（点）支撑，以便快速获得加筋横向移动的灵敏度信息。在基本不改变结构重量的情形下，通过合理布局加筋位置，能显著改善结构的刚度分布，提高结构的整体承载能力。随后，小幅调整加筋的截面尺寸，以满足对结构最大变形的设计要求。最后，用两个算例验证了所提优化方法的可行性和有效性。     

Investigations of Viscous Dissipation in Stagnation Point Flow Past a Stretchable Riga Wall: Modern Analysis of Heat Transport

This article scrutinizes the features of viscous dissipation in the stagnation point flow past through a linearly stretched Riga wall by implementing Cattaneo-Christov heat flux model. Viscous dissipation is carried out in Cattaneo-Christov diffusion analysis for the first time in this letter. As a result of Cattaneo-Christov model, some extra terms of viscous dissipation are appeared in the energy equation. These extra terms of viscous dissipation are missing in the literature. On the utilization of suitable transformations, the equations governing the problem are reduced under the boundary layer approximation into the non-linear and dimensionless ordinary differential equations. Convergent approach is utilized to solve the dimensionless governing equations. The solution thus acquired is used to highlight the effects of emerging parameters on velocity distribution and fluid's temperature through the graphs. Features of the drag force (or skin friction co-efficient) are graphically interpreted. It is noticed that the presence of modified Hartman number helps to reduce the fluid's temperature but enhances the velocity profile. Further an enlargement in the value of thermal time relaxation parameter helps to decrease the temperature distribution.     

Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

Carbon Nanotube‐phenolic Resin Composite Electrode Fabricated by Far Infrared‐assisted Crosslinking for Enhanced Amperometric Detection

The composite of carbon nanotube (CNT) and phenolic resin was prepared in a piece of fused silica capillary based on the far infrared‐assisted crosslinking of phenolic novolac resin in the presence of CNTs and hexamethylenetetramine for electrochemical sensing. The surface morphology and structure of the prepared materials were investigated by scanning electron microscopy, energy dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy. The results indicated that CNTs in the composite was adhered by the crosslinked phenolic resin to form an electrically conductive network. Many broken ends of CNTs appeared on the surface of the composite electrode in the form of a nanoelectrode array. The novel electrode was employed in the amperometric detection of synephrine and hesperidin in Citri Reticulatae Pericarpium in combination with capillary zone electrophoresis. The novel CNT‐based electrode owned the advantages of high sensitivity, low fabrication expense and excellent electrocatalytic performances, indicating great promise for the electrochemical detection in other analysis systems.     

原位合成Bi3O4Br/Bi12O17Br2光催化剂及其对磺胺甲噁唑降解性能

Bi_xO_yBr_z光催化剂在有机药物废水处理领域有着非常广阔的潜在应用价值,但因光生电子和空穴的快速复合而表现出较低的光催化效率,进而限制了其应用范围。通过简易的水解-焙烧法原位制得一种新型的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂,并以磺胺甲噁唑(SMX)为模拟药物污染物进行了光催化性能测试,对所制催化剂进行了X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、电化学阻抗(EIS)、光致发光光谱(PL)等表征。结果表明所制备的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂具有较强的光生载流子分离率、较低的界面电荷转移电阻,进而展示出优异的光催化降解SMX性能,在模拟太阳光下照射30 min,SMX降解率达到87%,相较于纯的Bi₃O₄Br和Bi₁₂O₁₇Br₂催化剂,降解率分别提升了30%和24%。最后基于自由基捕获实验和催化剂能带结构分析了所制催化剂的降解机理。     

Nickel(II) cluster‐based mixed‐cation coordination polymer synthesized from 2‐mercaptobenzoic acid and its application

High‐nuclearity metal clusters have received considerable attention not only because of their diverse architectures and topologies, but also because of their potential applications as functional materials in many fields. To explore new types of clusters and their potential applications, a new nickel(II) cluster‐based mixed‐cation coordination polymer, namely poly[hexakis[μ₄‐(2‐carboxylatophenyl)sulfanido]di‐μ₃‐chlorido‐tri‐μ₂‐hydroxido‐octanickel(II)sodium(I)], [Ni₈NaCl₂(OH)₃(C₇H₄O₂S)₆]_n, 1 , was synthesized using nickel chloride hexahydrate and mercaptobenzoic acid (H₂mba) as starting reactants under hydrothermal conditions. The material was characterized by single‐crystal X‐ray diffraction (SCXRD), Fourier transform IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction and X‐ray photoelectron spectroscopy analysis. SCXRD shows that 1 consists of a hexanuclear nickel(II) [Ni₆] cluster, dinuclear Ni^II nodes and a mononuclear Na^I node, resulting in the formation of a complex covalent three‐dimensional network. In addition, a tightly packed NiO/C&S nanocomposite is fabricated by sintering the coordination precursor at 400 °C. The uniform nanocomposite consists of NiO nanoparticles, incompletely carbonized carbon and incompletely vulcanized sulfur. When used as a supercapacitor electrode, the synthesized composite shows an extra‐long cycling stability (>5000 cycles) during the charge/discharge process.