吸收波长和吸收效率可控的超材料吸收器

为了使超材料完美吸收器(metamaterial perfect absorber,MPA)能够同时实现吸收效率和吸收波长的控制,本文提出利用二氧化钒(VO2)和石墨烯作为MPA的材料,通过对MPA的结构设计,在红外波段实现了高吸收,吸收效率最高可达99%.研究发现通过改变VO2的温度和石墨烯的化学势,可同时实现MPA吸收效率和吸收波长的控制,吸收效率调制深度和吸收波长调谐范围分别可达97.08%和3.2μm.通过对MPA在吸收波长处的磁场分布分析可以得出,MPA能够产生高吸收是由于其形成了法布里-帕罗(Fabry-Pérot,FP)干涉腔共振,研究发现MPA的结构参数对FP腔的共振波长具有显著的影响.     

Passive vibration absorber effect on the machining surface quality of a flexible workpiece

This paper presents a study of the vibratory behaviour of a flexible workpiece subject to a milling end operation. Indeed, this vibratory behaviour is critical, especially when the excitation frequency is near to the resonance. For this reason, passive vibration suppression is considered in order to attenuate the dynamic response of the milled workpiece and decrease the dynamic effect on the resulting machined surface roughness and flatness. In order to confirm the efficiency of the passive vibration suppression, the vibratory behaviour and the quality (roughness and flatness) of a machined surface are studied without and with passive absorber (TMD) using a finite-element model.     

Dispersive shock waves in three dimensional Benjamin–Ono equation

Dispersive shock waves (DSWs) in the three dimensional Benjamin–Ono (3DBO) equation are studied with step-like initial condition along a paraboloid front. By using a similarity reduction, the problem of studying DSWs in three space one time (3+1) dimensions reduces to finding DSW solution of a (1+1) dimensional equation. By using a special ansatz, the 3DBO equation exactly reduces to the spherical Benjamin–Ono (sBO) equation. Whitham modulation equations are derived which describes DSW evolution in the sBO equation by using a perturbation method. These equations are written in terms of appropriate Riemann type variables to obtain the sBO-Whitham system. DSW solution which is obtained from the numerical solutions of the Whitham system and the direct numerical solution of the sBO equation are compared. In this comparison, a good agreement is found between these solutions. Also, some physical qualitative results about DSWs in sBO equation are presented. It is concluded that DSW solutions in the reduced sBO equation provide some information about DSW behavior along the paraboloid fronts in the 3DBO equation.     

水硬性石灰合成及拉破坏特性试验研究

水硬性石灰在欧洲石质文物修复和加固中获得了很大成功。我国的石质文物主要是砂岩,水硬性石灰的修复效果不好。为满足我国石质文物修复和加固的需求,本文以石灰石和黏土为原料,在950℃煅烧不同时间,制备出水硬性石,对试样的成分、微观形貌、收缩率、抗拉强度和拉破坏过程等进行了研究。结果表明:(1)试样中含有水硬性成分2CaO·SiO2(C2S);煅烧8h时,成分与欧洲水硬性石灰NHL5接近;1.5CaO·SiO2·xH2O(C-S-H)和CaCO3的含量随龄期的增加逐渐增加。(2)龄期1~3d,收缩率较小;龄期4~6d,收缩率以线性规律增加;7d以后,收缩率趋于稳定。(3)局部变形区随拉应力的增加而变大,邻近局部变形区逐渐合并,形成面积更大的应变局部化带;载荷超过峰值后,产生微裂隙;随载荷进一步增加,微裂隙扩展,贯穿整个试件,发展成宏观裂隙,使试件破坏。(4)抗拉强度随龄期的增加而增加,水硬性石灰中C-S-H、CaCO3等相互交织,构成空间致密体,使试件力学强度提高。合成的水硬性石灰物理力学性能与欧洲水硬性石灰NHL5相近,并且成分均匀、可控,在石质文物修复和加固工程中具有良好应用前景。     

Monotonicity in high‐order curvilinear finite element arbitrary Lagrangian–Eulerian remap

The remap phase in arbitrary Lagrangian–Eulerian (ALE) hydrodynamics involves the transfer of field quantities defined on a post‐Lagrangian mesh to some new mesh, usually generated by a mesh optimization algorithm. This problem is often posed in terms of transporting (or advecting) some state variable from the old mesh to the new mesh over a fictitious time interval. It is imperative that this remap process be monotonic, that is, not generate any new extrema in the field variables. It is well known that the only linear methods that are guaranteed to be monotonic for such problems are first‐order accurate; however, much work has been performed in developing non‐linear methods, which blend both high and low (first) order solutions to achieve monotonicity and preserve high‐order accuracy when the field is sufficiently smooth. In this paper, we present a set of methods for enforcing monotonicity targeting high‐order discontinuous Galerkin methods for advection equations in the context of high‐order curvilinear ALE hydrodynamics. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

CH4/空气简化动力学机理数值验证

选择绕圆柱预混燃烧算例，验证CH₄/空气三种简化动力学机理（16s41r、15s19r和53s325r）.考虑均匀来流，忽略湍流和湍流与燃烧相互作用以及燃料扩散效应，假设层流有限反应速率，采用保自由流5阶WENO格式求解多组分Euler方程组，得到CH₄/空气预混燃烧流场温度等值线、沿驻点线压力和温度及其CH₄、CO和CO₂质量百分数分布.结果表明：三种简化动力学机理给出的流场均出现弓形激波和火焰面，弓形激波和火焰驻点距离及其形状、诱导区宽度和简化动力学机理相关.当圆柱直径增大，弓形激波和火焰向圆柱上游移动，对应的驻点距离均增大，诱导区宽度变短，点火延时变小，但火焰和弓形激波位置次序未变化.53s325r模型要比16s41r模型和15s19r模型精度要高，点火延时覆盖的压力和温度范围也较宽，所有简化机理均未完全反应，在较大圆柱直径下游达到化学平衡.     

高速气体与椭圆柱云相互作用的数值研究

高速颗粒流在天文、自然灾害、工业安全、医疗工业和国防等领域有着重要应用。采用基于分层流模型的直接数值模拟方法,对平面激波与椭圆柱云的相互作用进行数值研究,重点关注椭圆柱横截面的不同长短轴之比和椭圆柱横截面长轴与来流方向所成角度对流场的影响,从气体来流方向上的速度、x轴和y轴方向上的均方根速度、动能、内能和湍动能的分布上进行分析,对能量在计算域的上游区域、椭圆柱云区域和下游区域进行定量分析。同时针对椭圆柱改进了一维体积平均模型,利用该模型拟合了由直接数值模拟得到的反射激波和透射激波位置,获得了最适配的一维体积平均模型中的人工有效阻力系数,并探讨此系数的分布规律。     

柱状装药预制破片缩比战斗部爆炸冲击波和破片的作用时序

针对柱状装药的周向预制破片战斗部,结合无量纲分析方法和爆炸驱动理论,确定了影响破片和冲击波相遇位置的关键参数,给出了由缩比战斗部推广预测原型战斗部爆炸产生的破片冲击波作用时序的方法。采用ANSYS/LS-DYNA有限元软件进行数值模拟,对比验证了理论分析和数值试验结果,分析了战斗部缩比比例对冲击波和破片作用时序的影响。结果表明:缩比模型与原型战斗部爆炸产生的破片和冲击波的相遇位置之比和相遇时间之比主要取决于两模型的质量比,在不考虑破片速度衰减时,两模型中载荷相遇位置之比和相遇时间之比等于其质量比的0.33次方。受破片速度衰减影响,该方法仅适用于质量缩比不小于0.2的模型。     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.