Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

烷基苯磺酸盐表面活性剂对水合硅酸钙形貌和结构的影响

利用十二烷基苯磺酸钠(SDBS)为模板剂, 研究了SDBS的浓度、 Ca ²⁺和Si {\mathrm{O}}_3^{2-} 离子的浓度、 是否搅拌和反应时间等条件对水合硅酸钙(CSH)形貌特征和分散性能的影响, 并提出了不同CSH球壳形貌特征的形成机理. 结果显示, 溶液中Na₂SiO₃·9H₂O浓度增大、 SDBS浓度增大及反应时间延长均会使CSH的结晶度变好, 聚合度增大, Q ²结构的相对含量增加, 其中Na₂SiO₃·9H₂O和SDBS浓度是主要控制因素. SDBS在溶液中形成的球形胶束具有极强的模板作用, 能有效改变CSH的结晶生长方式; 通过调节SDBS浓度和钙硅比例, 并适当延长CSH的生长时间, 能够获得球壳完整、 分散性好且稳定性强的CSH.     

Exploring the undrained cyclic behavior of methane-hydrate-bearing sediments using CFD–DEM

Based on the mechanical experimental results of methane hydrate (MH), a bond contact model considering the rate-dependency of MH is proposed. A CFD–DEM scheme considering fluid compressibility is used to simulate a series of undrained cyclic shear tests of numerical methane-hydrate-bearing sediment (MHBS) samples. The dynamic behavior, including stress–strain relationship, dynamic shear modulus, and damping ratio, is investigated. In addition, the force chains, contact fabric and averaged pure rotation rate (APR) are examined to investigate the relationships between micromechanical variables and macromechanical responses in the DEM MH samples. The effects of temperature, confining pressure and MH saturation are also analyzed. Due to the micro-structural strengthening by the MH bonds, no obvious change in microscopic quantities is observed, and the samples remain at the elastic stage under the applied low-shear stress level. When confining pressure and MH saturation increase, the dynamic elastic modulus increases, while the damping ratio decreases. An increasing temperature (leading to weakening of MH bonds) can lower the dynamic elastic modulus, but has almost no impact on the damping ratio. On the contrary, an increasing cyclic shear stress level lowers the damping ratio, but has almost no effect on the dynamic elastic modulus.     

Methane dissolution inside bulk or porous-medium-confined water at near-hydrate equilibrium conditions

In this study, we perform a series of mass-balance-type calculations, in order to estimate the minimum volume of liquid water required to dissolve completely a single methane gas bubble, located inside different types of domains that are near or under hydrate equilibrium pressure/temperature conditions. We examine the case of methane bubble dissolution in the bulk, along with the cases of methane bubble dissolution within simple/regular networks of pores, where all pores have the same size. In our calculations, we consider experimental values for the equilibrium solubilities of methane in water, along the hydrate-forming line, as well as, values obtained from predictive tools that are based on different thermodynamic models. The effect of aqueous NaCl solutions on the results is also investigated. As a result of the relatively low solubility of methane in water, large volumes of water are required for complete dissolution of a methane bubble.     

苯并噻唑类荧光探针的合成及对N2H4·H2O和HSO-3的检测性能

以苯并噻唑为荧光团, 氰基乙酸乙酯为识别基团, 设计合成了对水合肼和亚硫酸氢盐具有双重检测能力的荧光探针3-(2-羟基-苯并噻唑)-2-氰基-丙烯酸乙酯(HBT-CN). 在二甲基亚砜/磷酸盐(体积比为1：4)的缓冲液中, 探针对水合肼和亚硫酸氢盐具有良好的选择性, 且荧光强度分别增强了5.6倍(500 nm)和7.5倍(458 nm). 结果表明, 在检测过程中, HTB-CN与水合肼发生了还原-缩合反应, 生成了醛腙, 在波长500 nm处发出黄绿色的荧光信号; HBT-CN与亚硫酸氢盐发生了亲核加成反应, 在波长458 nm处发出蓝色的荧光信号, 从而实现了对水合肼和亚硫酸氢盐的差异性定性与定量检测.     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

含水合物沉积物多相渗流特性研究进展

天然气水合物作为一种储量大、无污染的清洁能源近些年受到了广泛关注. 近20年来,中国进行了较大范围的陆海域天然气水合物储层勘探与储量预测.2017年,中国地质调查局牵头对南海神狐海域的天然气水合物进行了基于降压渗流原理的试验性开采.国内外已进行的水合物试采工程面临着气体产量低、出砂较多等问题,其最主要的原因之一是开发过程中沉积物内复杂多相渗流机理尚不明晰.本文综述了平行毛细管模型、Kozeny模型等广泛应用于天然气水合物开发渗流分析的理论模型,对比分析了水合物开发多尺度渗流过程模拟方法,简述了国内外含水合物沉积物渗透率测试、渗流过程中沉积物物性演变以及水合物开采室内模拟等方面的渗流实验进展,总结了矿场尺度的天然气水合物储层开采过程中产气数值模拟手段,展望了多相渗流模型、储层原位含水合物样品室内测试及结构与物性演化、矿场尺度数值模拟与水平井压裂技术等应用研究的未来方向与挑战.      

Crystal structures and properties of two hydrated conglomerate forms of the heart‐rate‐lowering agent ivabradine hydrochloride

Ivabradine hydrochloride (IVA‐HCl) (systematic name: {[3,4‐dimethoxybicyclo[4.2.0]octa‐1(6),2,4‐trien‐7‐yl]methyl}[3‐(7,8‐dimethoxy‐2‐oxo‐2,3,4,5‐tetrahydro‐1H‐3‐benzazepin‐3‐yl)propyl]methylazanium), is a novel medication used for the symptomatic management of stable angina pectoris. In many recent patents, it has been claimed to exist in a very large number of polymorphic, hydrated and solvated phases, although no detailed analysis of the structural features of these forms has been published to date. Here, we have successfully crystallized the tetrahydrate form of IVA‐HCl (form β), C₂₇H₃₇N₂O₅⁺·Cl^?·4H₂O, and elucidated its structure for the first time. Simultaneously, a new crystal form of IVA‐HCl, i.e. the hemihydrate (form II), C₂₇H₃₇N₂O₅⁺·Cl^?·0.5H₂O, was discovered. Its crystal structure was also accurately determined and compared to that of the tetrahydrate form. While the tetrahydrate form of IVA‐HCl crystallized in the orthorhombic space group P2₁2₁2₁, the new form (hemihydrate) was solved in the monoclinic space group P2₁. Detailed conformational and packing comparisons between the two forms have allowed us to understand the role of water in the crystal assembly of this hydrochloride salt. The stabilities of the two forms were compared theoretically by calculating the binding energy of the water in the crystal lattice using differential scanning calorimetry (DSC). The stability experiments show that the tetrahydrate is stable under high‐humidity conditions, while the hemihydrate is stable under high‐temperature conditions.