A lightweight cell switching and traffic offloading scheme for energy optimization in ultra-dense heterogeneous networks

One of the major capacity boosters for 5G networks is the deployment of ultra-dense heterogeneous networks (UDHNs). However, this deployment results in a tremendous increase in the energy consumption of the network due to the large number of base stations (BSs) involved. In addition to enhanced capacity, 5G networks must also be energy efficient for it to be economically viable and environmentally friendly. Dynamic cell switching is a very common way of reducing the total energy consumption of the network, but most of the proposed methods are computationally demanding, which makes them unsuitable for application in ultra-dense network deployment with massive number of BSs. To tackle this problem, we propose a lightweight cell switching scheme also known as Threshold-based Hybrid cEll swItching Scheme (THESIS) for energy optimization in UDHNs. The developed approach combines the benefits of clustering and exhaustive search (ES) algorithm to produce a solution whose optimality is close to that of the ES (which is guaranteed to be optimal), but is computationally more efficient than ES and as such can be applied for cell switching in real networks even when their dimension is large. The performance evaluation shows that THESIS significantly reduces the energy consumption of the UDHN and can reduce the complexity of finding a near-optimal solution from exponential to polynomial complexity.     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

核壳Fenton催化剂CuFe_2O_4@PDA-Cu的制备、表征及其活化H_2O_2降解染料的性能

为得到新型高效多相催化剂,有效去除废水中的染料,以Cu(Ac)_2与CuFe_2O_4@PDA为原料制备了催化剂CuFe_2O_4@PDA-Cu.通过IR、XRD、XPS、UV-Vis、DRS技术对催化剂的性能进行了表征,考察了温度、H_2O_2用量、催化剂用量、pH值、盐等对催化活性的影响.利用HPLC测定降解产物,采用自由基捕获和抑制实验进行机理验证,发现催化剂是核壳结构.温度升高、pH值升高、H_2O_2和催化剂用量的增加均有利于提高催化活性;氯化物、硫酸盐、硝酸盐和磷酸盐不影响催化效果,溴化物和亚硝酸盐降低了催化效果.得到的最优降解条件为:T=30℃,催化剂用量10mg·L~(-1),pH=9,过氧化氢用量10mmol·L~(-1),染料浓度30mg·L~(-1).最优条件下催化剂可循环使用4次以上;甲基橙、茜素红和罗丹明B的去除率为100%;染料R0213、O0118和B0115的去除率大于60%.降解产物有草酸、马来酸和CO_2.甲基橙、茜素红和罗丹明B降解后COD_(Mn)=2~4mg·L~(-1).水杨酸捕获·OH生成2.5-二羟基苯甲酸,叔丁醇抑制染料降解.结果表明,催化剂可活化H_2O_2产生·OH,·OH攻击染料分子开环降解直至矿化.该研究为开发高效多相催化剂,有效去除废水中的染料提供了科学依据.     

A cost‐effective curvature calculation approach for interfacial flows on unstructured meshes

We present a simple and cost‐effective curvature calculation approach for simulations of interfacial flows on structured and unstructured grids. The interface is defined using volume fractions, and the interface curvature is obtained as a function of the gradients of volume fractions. The gradient computation is based on a recently proposed gradient recovery method that mimicks the least squares approach without the need to solve a system of equations and is quite easy to implement on arbitrary polygonal meshes. The resulting interface curvature is used in a continuum surface force formulation within the framework of a well‐balanced finite‐volume algorithm to simulate multiphase flows dominated by surface tension. We show that the proposed curvature calculation is at least as accurate as some of the existing approaches on unstructured meshes while being straightforward to implement on any mesh topology. Numerical investigations also show that spurious currents in stationary problems that are dependent on the curvature calculation methodology are also acceptably low using the proposed approach. Studies on capillary waves and rising bubbles in viscous flows lend credence to the ability of the proposed method as an inexpensive, robust, and reasonably accurate approach for curvature calculation and numerical simulation of multiphase flows.     

Nickel(II) Schiff base complex supported on nano‐titanium dioxide: A novel straightforward route for preparation of supported Schiff base complexes applying 2,4‐toluenediisocyanate

For the first time, a novel, straightforward and inexpensive route for immobilization of metals in Schiff base complex form is reported applying 2,4‐toluenediisocyanate as a precursor of primary amine group. A nickel(II) Schiff base complex supported on nano‐TiO₂ was designed and synthesized as an effective heterogeneous nanocatalyst for organic reactions, and well characterized using various techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray analysis and thermogravimetric analysis. The catalytic efficiency of the complex was evaluated in selective oxidation of sulfide to sulfoxide by hydrogen peroxide as an oxidant under solvent‐free conditions at room temperature, which successfully resulted in high yield and high conversion of products. Effective factors including solvent type, oxidant and catalyst amount were also optimized. The catalyst shows outstanding reusability and could be impressively recovered for six consecutive cycles without significant change of its catalytic efficiency.     

Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

In Situ Generated Gold Nanoparticles on Active Carbon as Reusable Highly Efficient Catalysts for a C −C Stille Coupling

Gold nanoparticle catalysts are important in many industrial production processes. Nevertheless, for traditional C ?C cross‐coupling reactions they have been rarely used and Pd catalysts usually give a superior performance. Herein we report that in situ formed gold metal nanoparticles are highly active catalysts for the cross coupling of allylstannanes and activated alkylbromides to form C ?C bonds. Turnover numbers up to 29 000 could be achieved in the presence of active carbon as solid support, which allowed for convenient catalyst recovery and reuse. The present study is a rare case where a gold metal catalyst is superior to Pd catalysts in a cross‐coupling reaction of an organic halide and an organometallic reagent.     

Silica-Supported MnII Sites as Efficient Catalysts for Carbonyl Hydroboration,Hydrosilylation, and Transesterification

Manganese, the third most abundant transition-metal element after iron and titanium, has recently been demonstrated to be an effective homogeneous catalyst in numerous reactions. Herein, the preparation of silica-supported Mn^II sites is reported using Surface Organometallic Chemistry (SOMC), combined with tailored thermolytic molecular precursors approach based on Mn₂[OSi(OtBu)₃]₄ and Mn{N(SiMe₃)₂}₂⋅THF. These supported Mn^II sites, free of organic ligands, efficiently catalyze numerous reactions: hydroboration and hydrosilylation of ketones and aldehydes as well as the transesterification of industrially relevant substrates.     

An efficient edge based data structure for the compressible Reynolds-averaged Navier–Stokes equations on hybrid unstructured meshes

An efficient edge based data structure has been developed in order to implement an unstructured vertex based finite volume algorithm for the Reynolds-averaged Navier–Stokes equations on hybrid meshes. In the present approach, the data structure is tailored to meet the requirements of the vertex based algorithm by considering data access patterns and cache efficiency. The required data are packed and allocated in a way that they are close to each other in the physical memory. Therefore, the proposed data structure increases cache performance and improves computation time. As a result, the explicit flow solver indicates a significant speed up compared to other open-source solvers in terms of CPU time. A fully implicit version has also been implemented based on the PETSc library in order to improve the robustness of the algorithm. The resulting algebraic equations due to the compressible Navier–Stokes and the one equation Spalart–Allmaras turbulence equations are solved in a monolithic manner using the restricted additive Schwarz preconditioner combined with the FGMRES Krylov subspace algorithm. In order to further improve the computational accuracy, the multiscale metric based anisotropic mesh refinement library PyAMG is used for mesh adaptation. The numerical algorithm is validated for the classical benchmark problems such as the transonic turbulent flow around a supercritical RAE2822 airfoil and DLR-F6 wing-body-nacelle-pylon configuration. The efficiency of the data structure is demonstrated by achieving up to an order of magnitude speed up in CPU times.     

Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.