光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

油-气-水三相流超声传感器持气率测量*

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

挤压-堆积复合法制备As_2S_3红外硫系玻璃光子晶体光纤及其特性研究

在利用多极法优化设计光子晶体光纤结构的基础上,充分结合挤压和堆积两种方法的优点,提出了基于挤压-堆积的新型硫系光子晶体光纤制备技术,利用As2S3硫系玻璃制备了三层孔环结构光子晶体光纤.通过理论模拟分析得出了该光纤的色散特性和零色散点,测试了1 550 nm近红外光纤激光在该光纤中的传输效果和纤芯光斑能量分布,利用该光斑测试验证了该光纤在近红外的光能传输局部限制能力和光子晶体的光学初步控制现象.     

Optomechanical-organized multipulse dynamics in ultrafast fiber laser

A novel organized multipulse pattern and its birth dynamics under strong optomechanical effect in microfiber-assisted ultrafast fiber laser are investigated in this work. The background pulses are observed to obviously exhibit selectively amplifying self-organized process of evolving into quasi-stable equidistant clusters. The radio frequency spectrum of the multipulse pattern displays a harmonic mode-locking-like behavior with a repetition rate of 2.0138 GHz, corresponding to the frequency of torsional-radial (TR_2m) acoustic mode in microfiber. The results show the evidence of optomechanical effect in dominating the birth dynamics and pattern of multipulse.     

The single-polarization filter composed of gold-coated photonic crystal fiber

A single-polarization filter comprising a gold-coated photonic crystal fiber based on surface plasmon resonance is designed and investigated. The pattern matching and coupled polarization characteristics analyzed by the full-vector finite element method (FEM) and losses at 1,540 nm are achieved to 1,016.01739 dB/cm (x-pol core mode) and 33.81917 dB/cm (y-pol core mode). The crosstalk (CT) value of the 1,540 nm band is ?853.12653 dB for fiber length $L=1,000\mathrm{\mu }\text{m}$ and the bandwidth is 850 nm. The working wavelength of the filter ranges from 1,280 nm to 1,540 nm by varying the diameter of outer air holes ($d_1$), the diameter of inner air holes ($d_4$), the metal film thickness (t), as well as the liquid refractive index (n).     

A High‐Efficiency All‐Fiber Laser Operated in High‐Order Mode using Ring‐Core Yb‐Doped Fiber

An all‐fiber laser generating a cylindrical vector beam is proposed and demonstrated using a home‐made ring‐core Yb‐doped fiber (RC‐YDF). In the RC‐YDF, not only annular doping but also ring‐type beam pump is realized. This is believed to be the first report describing the realization of annular doping and ring‐type beam pump in active fiber simultaneously, which can enhance the efficiency for high‐order mode oscillation. This laser operates in the high‐order mode stably with a slope efficiency of as high as 55.7%. Cylindrical vector modes can be obtained easily through adjusting the polarization controller. This work may have great potential for providing high‐efficiency and high‐power cylindrical vector beam and vortex beam sources.     

碳纤维复合材料的激光清洗等离子体光谱在线检测研究

近年来碳纤维复合材料（CFRP）由于性能优异，受到工业领域广泛关注。采用激光清洗技术预处理碳纤维复合材料表面的污染物和环氧树脂等杂质，有利于改善碳纤维复合材料表面性能，提高碳纤维复合材料胶接界面的结合强度。在线检测激光清洗过程，实时判断碳纤维复合材料的表面清洗质量，是保证激光清洗效果的关键环节，也是激光清洗装置自动化、集成化的核心技术。激光诱导等离子体光谱技术可以快速分析材料表面元素变化，实现在线检测激光清洗表面状态，在激光清洗领域有很广的应用前景。采用Nd∶YAG高能量脉冲激光器产生的1 064 nm激光在空气环境中诱导产生等离子体，利用改进型光栅光谱仪(ME5000)获取等离子体光谱，在线检测激光清洗碳纤维复合材料。研究外界空气环境对等离子体光谱检测结果的影响，发现350~700 nm波段的元素谱线可用于碳纤维复合材料表面物质成分分析；采用电子扫描显微镜观测的激光清洗表面形貌和X射线电子能谱仪测得的元素变化共同表征等离子体光谱检测的有效性，通过采集不同激光能量以及不同作用次数的等离子体光谱图，获得碳纤维复合材料表层树脂物质通过激光单次清洗干净的阈值，研究激光清洗质量与激光诱导等离子体谱线成分及其强度变化的关系。结果表明：在获取的激光诱导等离子体光谱中，光谱图中谱线波长在393.3 nm的S(Ⅱ)和589.5 nm的S(Ⅱ)谱线可有效在线表征碳纤维复合材料表面清洗质量；激光单次去除干净表面环氧树脂的阈值为10.68 mJ；低激光能量时需要清洗多次可以去除干净表面树脂；高激光能量时清洗单次可使表面树脂去除干净，多次清洗易造成基体损伤。实验结果为激光清洗碳纤维复合材料的智能集成化应用提供工艺依据和技术支持。     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.