A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Carbon Nanotube‐phenolic Resin Composite Electrode Fabricated by Far Infrared‐assisted Crosslinking for Enhanced Amperometric Detection

The composite of carbon nanotube (CNT) and phenolic resin was prepared in a piece of fused silica capillary based on the far infrared‐assisted crosslinking of phenolic novolac resin in the presence of CNTs and hexamethylenetetramine for electrochemical sensing. The surface morphology and structure of the prepared materials were investigated by scanning electron microscopy, energy dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy. The results indicated that CNTs in the composite was adhered by the crosslinked phenolic resin to form an electrically conductive network. Many broken ends of CNTs appeared on the surface of the composite electrode in the form of a nanoelectrode array. The novel electrode was employed in the amperometric detection of synephrine and hesperidin in Citri Reticulatae Pericarpium in combination with capillary zone electrophoresis. The novel CNT‐based electrode owned the advantages of high sensitivity, low fabrication expense and excellent electrocatalytic performances, indicating great promise for the electrochemical detection in other analysis systems.     

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

γ-Valerolactone (GVL): An eco-friendly anchoring solvent for solid-phase peptide synthesis

Due to the hazardous nature of CH₂Cl₂, regulatory authorities have imposed restrictions to minimize or even stop its use. It has therefore become imperative to identify environmentally benign solvents to replace it. Here we report on a bio derived solvent, γ-valerolactone, for the incorporation of the first amino acid onto p-alkoxybenzyl alcohol resin in solid-phase peptide synthesis. Satisfactory loading values (by a spectrophotometric method) were achieved. Furthermore, racemization and dipeptide formation were also checked and found to be acceptable.     

Raising the bar on-bead: Efficient on-resin synthesis of α-conotoxin LvIA

α4/7-Conotoxin LvIA is an isoform-selective inhibitor of the α3β2 nicotinic acetylcholine receptor. An efficient strategy for the synthesis of this toxin is critical to advancing its utility as a probe for receptor function and as a potential pharmaceutical lead target. On-resin methods for peptide synthesis offer potential synthetic advantages; however, strategies for on-resin formation of multiple disulfides have historically been low-yielding. Here, we harness the reactivity of the Allocam protecting group and employ a 3-amino acid spacer strategy to synthesize α4/7-conotoxin LvIA via three different on-resin strategies, each of which results in an isolated yield higher than previous fully on-resin approaches.     

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.     

Resin‐Derived Ni3S2/Carbon Nanocomposite for Advanced Rechargeable Aqueous Zn‐Based Batteries

The exploration of high‐energy and stable cathode materials is highly desirable and challenging for the development of advanced Zn‐based batteries. In this work, a facile pyrolysis method is reported to synthetize Ni₃S₂/carbon nanocomposite as high‐performance cathode by employing ion exchange resin as a precursor. Attributing to the abundant active sites and enhanced conductivity from well binding between Ni₃S₂ and carbon, a markedly high capacity of 234.3 mA h g^?1 is obtained for this Ni₃S₂/carbon at a high current density of 6.9 A g^?1. Moreover, a Zn‐based battery is demonstrated by using the Ni₃S₂/carbon as a cathode and Zn plate as an anode, which delivers a maximum power density of 58.6 kW kg^?1, together with a peak energy density of 356 W h kg^?1 and 93.7% capacity retention after 5000 charging–discharging cycles. This simple synthetic strategy to achieve robust Ni‐based composite electrodes may open up new opportunities to design other transition metal–based electrodes for energy storage applications.     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

静电纺丝法制备酚醛纤维研究进展

酚醛树脂是一种广泛使用的合成树脂,包括热固性和热塑性两类,具有良好的阻燃性、耐热性和耐腐蚀性。酚醛纤维是由酚醛树脂所制成的交联纤维,传统的酚醛纤维制备方法有熔融纺丝法和湿法纺丝法,后来出现了静电纺丝法。本文根据酚醛树脂的种类分别介绍了热固性、热塑性和热塑/热固混合酚醛树脂三类材料静电纺丝的研究进展。在改善酚醛纤维特性方面,综述了四种优化措施,包括加入无机盐、微波辐射辅助固化、非匀速阶梯式加热固化、氧化石墨烯修饰的静电纺丝法等。此外,对本实验室制备酚醛纤维的研究也进行了概述,阐述了酚醛纤维当前存在的问题及未来发展方向。