Dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate liquid crystal

The dielectric and elastic properties of liquid crystals (LCs) generally depend on the molecule structure, such as polar group and carbon chain length. For further investigation of the influence of molecular structure on the dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate LC, the experimental temperature was controlled at 25°C by precision hot stage, and a precision LCR meter was used to measure the capacitance of six LC cells under the voltage from 0.1 to 20 V at 1 kHz. An LC cell capacitance model and a dual-cell model were adopted to obtain the dielectric anisotropy, and the capacitance–voltage curves of six LC materials were plotted. The threshold voltage of Fréedericksz transition was analysed, and a finite difference iterative method was used to attain specific values of three elastic constants. The influence of molecular structure on the dielectric and elastic constants was finally analysed. Experimental results showed that the introduction of meta-difluoro group would increase the dielectric anisotropy and reduce the threshold voltage of LC. As the length of the alkyl carbon chain increased, the dielectric anisotropy would have an odd–even alternation effect, which would lead to changes in the elastic constants of LC.     

考虑侧面摩擦的侧限压缩模型的数值解法

海上箱筒型基础结构下沉到位后，舱内土体的受力变形可以看作是侧限压缩模型问题，上部荷载引起的侧壁摩擦力与土体应力之间的关系较为复杂。本文通过简化模型，列出了侧限压缩模型的平衡微分方程，分析了方程解析计算时存在的难点，结合摩擦应力边界条件的特点，构造函数迭代法对该方程进行数值求解，展示了计算的收敛过程，得到接触侧面上水平应力和土体表面位移的非线性分布规律，并将其结果与ABAQUS数值模拟结果进行了对比。结果表明，函数迭代法收敛速度较快，计算过程稳定，对其他存在变量耦合边界条件的微分方程数值求解有一定的参考价值。     

简易振动台试验设备研制

为了完成多桩型复合地基抗液化性能振动台试验,利用实验室已有的反力墙和作动器,设计了一个小型的简易单向振动台系统和堆叠式剪切模型箱。堆叠式剪切模型箱内部尺寸为1200mm×800mm×772mm,由8层铝合金框架和7层橡胶条叠合而成。利用ANSYS有限元软件对模型箱及地基-模型箱进行了动力分析,并通过饱和粉细砂地基模型振动台试验验证了模型箱的效果。结果表明,所设计的模型箱能够较成功地模拟天然场地的边界条件,为多桩型复合地基抗液化性能振动台试验的顺利进行打下基础。     

理想弹塑性固体Riemann问题的解结构与初值条件

针对理想弹塑性固体材料的一维Riemann问题，在不考虑真空的情况下，讨论其所有可能存在的解结构，给出每一种解结构下对应的初值条件且证明该系列初值条件的完备性，即任意给定的物理量初值均有且只有一种解结构与之对应.基于该理论，在设计精确或近似理想弹塑性Riemann问题求解器时，可以依据初值条件对任意物理量初值直接判断其对应的解结构，从而提高求解器的精度和效率.数值试验验证了该系列初值条件的正确性和有效性.     

弹性介质中受轴向冲击载荷作用的圆柱壳的屈曲临界载荷计算分析

建立并求解了弹性介质中圆柱壳的径向位移控制方程,考虑边界条件及相容条件,得到了应力波传播及反射过程中圆柱壳的动力屈曲分叉条件.通过计算得到了不同时间段屈曲临界载荷与应力波波阵面到达圆柱壳的位置、弹性介质的刚度、壳体未嵌入弹性介质部分的长度与总长之比的关系.数值计算结果表明,弹性介质中的圆柱壳发生轴对称屈曲和非轴对称屈曲趋势一致;嵌入弹性介质部分越深、弹性介质刚度越大圆柱壳越难屈曲;屈曲临界载荷随着弹性介质刚度的增大经历了增长缓慢、增长迅速以及增长较慢3个阶段;应力波反射前波阵面通过分界面后,屈曲仅发生在应力波传播区域,反射波波阵面通过分界面前,临界载荷较小时屈曲先发生在反射端部,随着轴向阶数增大,屈曲覆盖整个圆柱壳区域,反射波波阵面通过分界面后,壳体发生的屈曲始终覆盖整个圆柱壳区域.     

超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

Two-dimensional magneto-thermoelastic interactions in a micropolar functionally graded solid

Abstract

The present work is concerned with the 2D deformation in a nonhomogeneous, isotropic, micropolar, magneto-thermoelastic medium in the context of Lord-Shulman theory as a result of an inclined load. The inclined load is supposed to be a linear combination of normal load and tangential load. Material properties are assumed to be graded in x-direction. Normal mode technique is proposed to obtain the analytical expressions for the temperature field, displacement components, and stresses. These are also calculated numerically and depicted graphically to observe the variations of the considered physical variables.

Communicated by Seonho Cho.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

New measurements and reanalysis of 14N elastic scattering on 10B target

The angular distributions of elastic scattering of ¹⁴N ions on ¹⁰B targets have been measured at incident beam energies of 21.0 and 24.5 MeV. Angular distributions at higher energies 38–94.0 MeV (previously measured) were also included in the analysis. All data were analyzed within the framework of the optical model and the distorted waves Born approximation method. The observed rise in cross sections at large angles was interpreted as a possible contribution of the α-cluster exchange mechanism. Spectroscopic amplitudes SA₂ and SA₄ for the configuration ¹⁴N→ ¹⁰B +α were extracted. Their average values are 0.58±0.10 and 0.81±0.12 for SA₂ and SA₄, respectively, suggesting that the exchange mechanism is a major component of the elastic scattering for this system. The energy dependence of the depths for the real and imaginary potentials was found.