次分数布朗运动局部时的研究

设X^H={X^H(t),t∈R+}是一个取值于R^d参数为H的次分数布朗运动.本文给出了X^H在单参数情况下局部时的Holder条件和尾概率估计.同时,还给出了X^H在多参数情况下局部时的存在性及L^2表示.     

TracePro在“光的偏振实验”中的应用

为提高光的偏振实验教学效果和教学质量,在教学中引入专业的光学设计软件--TracePro,利用该软件仿真了光的双折射过程和现象,以及偏振片的原理;建立光的偏振实验系统实体模型,完成光的偏振态判断实验;仿真光通过波片后的偏振态转换现象;验证马吕斯定律,并仿真了多层介质膜对光的分离和旋光现象.结果表明该方法可以提高教学效率,激发学生探索科学的主观能动性,仿真结论与理论推导和实际实验结果一致.     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Cages versus Sheets: A Critical Comparison in the Size Range Expected for Methylaluminoxane (MAO)

New cage models (MeAlO)_n(Me₃Al)_m (n=16, m=6 or 7) isomeric with previously reported sheet models for the principle activator found in hydrolytic MAO (h-MAO) are compared at M06-2X and MN15 levels of theory using density functional theory with respect to their thermodynamic stability. Reactivity of the neutrals or corresponding anions with formula [(MeAlO)₁₆(Me₃Al)₆Me]⁻ towards chlorination, and loss of Me₃Al is explored while reactivity of the neutrals towards formation of contact- and outer-sphere ion pairs from Cp₂ZrMe₂ and Cp₂ZrMeCl is examined. The results suggest on balance that a cage model for this activator is less consistent with experiment than an isomeric sheet model, although the latter are more stable based on free energy.     

Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.     

片状云母径厚比表征方法研究

片状材料的径厚比是片状材料的一个重要特征参数。以片状云母为研究对象,引入形状明显区别于片状云母的聚苯乙烯球作为支撑材料。实验结果表明,当云母片与聚苯乙烯球混合质量比为1∶3时,呈竖立取向云母片的数量达到最大值,随机采集200个云母片的长径和厚度,其径厚比的统计样本均值为15.37。支撑材料聚苯乙烯球为片状云母带来大量支撑位点,显著提高片状云母呈竖立取向的概率,能够快速、直观地同时测量云母片的长径和厚度,有效提高云母片径厚比的测量效率和准确性。     

Wavelet-based estimator for the hurst parameters of fractional brownian sheet

It is proposed a class of statistical estimators H =(H_1,…,H_d) for the Hurst parameters H =(H_1,…,H_d) of fractional Brownian field via multi-dimensional wavelet analysis and least squares,which are asymptotically normal.These estimators can be used to detect self-similarity and long-range dependence in multi-dimensional signals,which is important in texture classification and improvement of diffusion tensor imaging(DTI) of nuclear magnetic resonance(NMR).Some fractional Brownian sheets will be simulated and the simulated data are used to validate these estimators.We find that when H_i ≥ 1/2,the estimators are accurate,and when H_i 1/2,there are some bias.     

Evaluation of hybrid laser-cut and cast miniature fracture specimens

This paper presents a new hybrid laser-cutting method for producing fracture test specimens from thermosetting materials. The hybrid approach combines casting of a sheet of material with subsequent laser-cutting of the test specimens. The new approach was compared to the traditional casting method using a fracture toughness test. For this study, a compact version of the tapered double cantilever beam (cTDCB) was used as a specimen geometry for both manufacturing methods. The cTDCB specimen is crack length independent, and crack length investigations were performed to ensure the crack length independence of the cTDCB specimens. The specimens that were made by the hybrid laser-cut method were found to be comparable to the specimens obtained by the traditional casting method. Moreover, the laser-cut method provides a fast and accurate method to make a significant number of samples in a reasonable time. These tests show that the hybrid laser-cut method could be a good alternative to the traditional casting method.