基于电化学老化衰退模型的锂离子动力电池外特性

当前锂离子动力电池电化学模型存在模型复杂、建模难度大、计算效率低、老化评估效果差的问题,本文提出一种考虑电池衰退老化的机理模型(ADME).本文首先通过有限差分法对伪二维(P2D)电化学模型进行离散降阶处理,得到简化伪二维(SP2D)模型.在SP2D模型的基础上,基于阴阳两极发生的副反应导致的衰退老化现象,提出一种考虑电池衰退老化的机理模型.其次,使用多变量偏差补偿最小二乘法实现模型参数辨识.最后通过动力电池衰退老化性能循环实验,对比分析了恒流、脉冲工况下SP2D模型和ADME模型的终端电压输出.结果表明:ADME模型较为简单、计算效率和估算精度高,可以有效评估电池容量老化衰退,得到理想的锂离子动力电池外特性曲线.     

Design of a 6-DOF force device for virtual assembly (FDVA-6) of mechanical parts

Among different interaction modalities, force feedback is one of the key technologies to increase the interactivity and immersion of a virtual assembly process. This paper presents a 6-DOF force device with its forward kinematic analysis, workspace simulation, and gravity compensation. To evaluate the device, a prototype system is developed and a case study is conducted to assemble a mechanical product. The users have given positive feedback on the gravity compensation implemented and the general performance of the device.     

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [Ru^II(bpy)₂(CN)₂]₂(Cu^II)₂ (bpy=2,2′-bipyridine), is described. This complex integrates a task-specific catalyst (Cu^I-catalyst) and a signaling unit ([Ru^II(bpy)₂(CN)₂]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λ_max=400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [Ru^II(bpy)₂(CN)₂], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.     

基于六面体网格的向量式有限元分析及应用

基于向量式有限元基本原理，给出了八节点六面体等参实体单元的基本公式，通过投影方式将空间曲面六面体转换为投影六面体，采用参考面的逆向运动求解节点纯变形，通过单元形函的虚功方程计算节点内力；针对坐标模式和内力积分模式等关键问题提出了有效的处理方案。编制了六面体实体单元的数值计算程序，并进行工程结构算例分析。结果表明，所编制程序可有效模拟实体结构的静力、动力及大变形大位移行为分析，验证了本文理论和程序的正确性和实用性。     

Deformation of thin straight pipes under concentrated forces or prescribed edge displacements

The purpose of this paper is to present an efficient analytic method for obtaining the deformation of thin straight pipes, subjected to prescribed edge displacements or concentrated loads.The approach uses the mixed formulation where unknown functions are combined with trigonometric terms. A variational procedure is used to obtain the system of ordinary differential equations. For the applied load a Fourier approach is used to represent the load as an analytical function. For the prescribed displacement, three solutions for the ovalization are evaluated and a method based on energy contribution of each term is used to obtain their superposition.In contrast to finite element method the proposed method is efficient and can be applied to other boundary condition problems leading to continuous displacement and stress fields with a low number of unknowns. Comparisons with experimental and finite element procedures show good agreement that enhances the merits of the analytical solutions proposed.The value of this method is based on solving the differential equations rather than using commercial codes. So far, the solution of prescribed edge displacements has been limited to one term. This paper discusses how to add further terms using the mixed formulation, thus, presenting a novel procedure.     

Two-dimensional optical coherence tomography for real-time structural dynamical characterization

We present a two-dimensional optical coherence vibration tomography (2DOCVT) system with an ultra-precision displacement resolution of ~0.1 nm that is capable of in site real-time absolute displacement measurement of structural line vibrations. Experimental results of sinusoidal, sweep and impulse vibrations were reported. The key figures of merit such as the 2DOCVT system could obtain fast line vibration measurement without scanning and it also could be used to capture structural modal parameters in one single impulse excitation measurement without any vibration excitation input information, making it attractive for the application in low-frequency vibration measurement and response-only modal analysis.     

Hexametaphosphate‐Capped Silica Mesoporous Nanoparticles Containing CuII Complexes for the Selective and Sensitive Optical Detection of Hydrogen Sulfide in Water

Cu^II‐macrocycle functionalized hexametaphosphate‐capped silica mesoporous nanoparticles have been prepared and used for the selective and sensitive detection of hydrogen sulfide in aqueous environments. The possibility of using different metal complexes combined with different capping anions and choice of different dyes or other sensing molecules as indicators makes this new protocol highly appealing for the preparation of new sensing systems for sulfide detection in different environments.     

THE SHEAR LAG EFFECT OF BOX BEAMS WITH VARYING LATERAL LOADING LOCATIONS 1)

对箱梁各翼板(顶板、悬臂板、底板)分设不同剪力滞广义纵向位移,其横向分布均取二次抛物线形式,并引入载荷横向位置参数η,以分析载荷横向变位对剪力滞效应的影响.运用能量变分原理,建立剪力滞控制微分方程,求解了简支梁和悬臂梁在均布载荷作用下的控制微分方程的解.算例分析表明:载荷横向变位改变直接承受载荷的翼板的正负剪力滞特性,对非直接承载翼板只改变其应力幅度;箱梁横向框架效应对直接承载翼板纵向应力的贡献远远大于剪切变形.与块体有限元分析结果较吻合,表明该算法能较准确分析载荷横向变位作用下箱梁剪力滞的变化规律.     

电阻应变测试技术中的温度补偿功能辨析

针对基于温度应变补偿的结构电阻应变测试技术,分析了结构温度应变的产生原理与结构温度应变的补偿原理,辨析了结构温度应变与补偿块温度应变二者的相互关联与差异.在此基础上,指出了基于温度应变补偿模式的结构电阻应变测试技术的错误在于:概念上混淆了结构的温度应变与补偿块的温度应变,导致了结构温度应变的错误补偿.同时,给出了正确实现工程结构应变测试的环境条件,以最大限度地保证了结构应变测试数据的客观性与可靠性.     

Length scale effects in epoxy: The dependence of elastic moduli measurements on spherical indenter tip radius

Significant increases in the measured elastic moduli with decreasing indentation depth have been previously found in various polymers by indentation tests with a Berkovich tip at micro-to nanometer length scales. These increases in the determined elastic moduli were related to second order displacement gradients which increase with decreasing depth when a conical tip is applied. When a spherical tip is applied, such depth dependence should not be present as the second order displacement gradients remain essentially unchanged with indentation depth. However, these gradients should be proportional to the radius of the spherical tip. To examine the notion of second order displacement gradient dependence in measurements of elastic moduli, indentation experiments are conducted on epoxy with spherical tips of different nominal radii. Accounting for tip imperfections, an increase in the determined elastic moduli is found with decreasing tip radius, which corroborates the notion of second order displacement gradient dependence.