Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar hard segment contents and linear moduli but sensibly different large strain properties as shown by X-ray analysis. Despite these differences, we found a stiffening effect after conditioning in step cyclic loading which greatly differs from the common softening (also referred as Mullins effect) observed in chemically crosslinked filled rubbers. We propose that this self-reinforcement is related to the fragmentation of hard domains, naturally present in TPU, in smaller but more numerous sub-units that may act as new physical crosslinking points. The proposed stiffening mechanism is not dissimilar to the strain-induced crystallization observed in stretched natural rubber, but it presents a persistent nature. In particular, it may cause a local reinforcement where an inhomogeneous strain field is present, as is the case of a crack propagating in cyclic fatigue, providing a potential explanation for the well-known toughness and wear resistance of TPU.     

One Way Traffic: Base-to-Backbone Hole Transfer in Nucleoside Phosphorodithioate

The directionality of the hole-transfer processes between DNA backbone and base was investigated by using phosphorodithioate [P(S⁻)=S] components. ESR spectroscopy in homogeneous frozen aqueous solutions and pulse radiolysis in aqueous solution at ambient temperature confirmed initial formation of G^.+-P(S⁻)=S. The ionization potential of G-P(S⁻)=S was calculated to be slightly lower than that of guanine in 5′-dGMP. Subsequent thermally activated hole transfer from G^.+ to P(S⁻)=S led to dithiyl radical (P-2S^.) formation on the μs timescale. In parallel, ESR spectroscopy, pulse radiolysis, and density functional theory (DFT) calculations confirmed P-2S^. formation in an abasic phosphorodithioate model compound. ESR investigations at low temperatures and higher G-P(S⁻)=S concentrations showed a bimolecular conversion of P-2S^. to the σ²-σ*¹-bonded dimer anion radical [-P-2S 2S-P-]⁻ [ΔG (150 K, DFT)=−7.2 kcal mol⁻¹]. However, [-P-2S 2S-P-]⁻ formation was not observed by pulse radiolysis [ΔG° (298 K, DFT)=−1.4 kcal mol⁻¹]. Neither P-2S^. nor [-P-2S 2S-P-]⁻ oxidized guanine base; only base-to-backbone hole transfer occurs in phosphorodithioate.     

A Click Chemistry Approach to Developing Molecularly Targeted DNA Scissors

Nucleic acid click chemistry was used to prepare a family of chemically modified triplex forming oligonucleotides (TFOs) for application as a new gene-targeted technology. Azide-bearing phenanthrene ligands—designed to promote triplex stability and copper binding—were ‘clicked’ to alkyne-modified parallel TFOs. Using this approach, a library of TFO hybrids was prepared and shown to effectively target purine-rich genetic elements in vitro. Several of the hybrids provide significant stabilisation toward melting in parallel triplexes (>20 °C) and DNA damage can be triggered upon copper binding in the presence of added reductant. Therefore, the TFO and ‘clicked’ ligands work synergistically to provide sequence-selectivity to the copper cutting unit which, in turn, confers high stabilisation to the DNA triplex. To extend the boundaries of this hybrid system further, a click chemistry-based di-copper binding ligand was developed to accommodate designer ancillary ligands such as DPQ and DPPZ. When this ligand was inserted into a TFO, a dramatic improvement in targeted oxidative cleavage is afforded.     

Fatigue Behavior of Composite Sandwich Panels Under Three Point Bending Load

In this paper, the bending fatigue tests of honeycomb sandwich panels are carried out by using an improved three-point bending test fixture, and the S-N curves at different stress ratios are obtained. Through the records of fatigue damage in the experiment, the failure mode of the honeycomb sandwich panels and the source of fatigue damage are determined. At the same time, through the calculation of the shear stress distribution on the honeycomb wall, the reasons for the difference in the failure morphology of the L-direction and W-direction sandwich panels are clarified. Besides, a life prediction method is proposed and its effectiveness in predicting the fatigue life of sandwich panels has been verified.     

Logging damage and injured tree mortality in tropical forest management

Using insights from the forest ecology literature, we analyze the effect of injured trees on stand composition and carbon stored in above‐ground biomass and the implications for forest management decisions. Results from a Faustmann model with data for a tropical forest on Kalimantan show that up to 50% of the basal area of the stand before harvest can consist of injured trees. Considering injured trees leads to an increase in the amount of carbon in above‐ground biomass of up to 165%. These effects are larger under reduced impact logging than under conventional logging. The effects on land expectation value and cutting cycle are relatively small. The results suggest that considering injured trees in models for tropical forest management is important for the correct assessment of the potential of financial programs to store carbon and conserve forest ecosystem services in managed tropical forests, such as reducing emissions from deforestation and forest degradation and payment for ecosystem services. Recommendations for Resource Managers

• Considering the role of injured trees is important for managing tropical forests
• These trees can cover up to 50% of basal area and contain more than 50% of the carbon stored in above‐ground biomass
• Reduced impact logging leads to a larger basal area of injured trees and more carbon stored in injured trees than conventional logging
• Injured trees play an important role when assessing the potential for carbon storage in the context of payment for forest ecosystem services.

     

An interview with Sam C. Saunders

Sam C. Saunders, the son of Elizabeth Cundiff and Winston E. Saunders, was born in Richland, OR, on February 24, 1931. The family moved to La Grande, OR, in 1944, where Sam completed high school and two years at Eastern Oregon College. He then received the BSc degree in Mathematics from the University of Oregon, Eugene, OR, in 1952, and he attended the University of Washington, Seattle, WA, receiving a PhD degree under Z. W. Birnbaum. After graduating, he accepted employment at the Boeing Company in its Mathematical Services Unit and, in 1972, a position as a Full Professor at Washington State University, Pullman, WA, from which he retired in 1996.     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

An Endoplasmic Reticulum Targeting Type I Photosensitizer for Effective Photodynamic Therapy against Hypoxic Tumor Cells

Organelle-targeted type I photodynamic therapy (PDT) shows great potential to overcome the hypoxic microenvironment in solid tumors. The endoplasmic reticulum (ER) is an indispensable organelle in cells with important biological functions. When the ER is damaged due to the production of reactive oxygen species (ROS), the accumulation of misfolded proteins will interfere with ER homeostasis, resulting in ER stress. Here, an ER-targeted benzophenothiazine-based photosensitizer NBS-ER was presented. ER targeting modification significantly reduced the dark toxicity and improved phototoxicity index (PI). NBS-ER could effectively produce O₂⁻⋅ with near-infrared irradiation, making its phototoxicity under hypoxia close to that under normoxia. Meanwhile, the photoinduced ROS triggered ER stress and induced apoptosis. In addition, NBS-ER possessed excellent photodynamic therapeutic effect in 4T1-tumor-bearing mice.     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339