Effect of strain on charge density wave order in α-U

The effect of strain on charge density wave (CDW) order in $\alpha$-U is investigated within the framework of relativistic density-functional theory. The energetical stability of $\alpha$-U with CDW distortion is enhanced by the tensile strain along $a$ and $b$ axes, which is similar to the case of negative pressure and normal. However, the tensile strain along $c$ axis suppresses the energetical stability of CDW phase. This abnormal effect could be understood from the emergence of a new one-dimensional atomic chain along $c$ axis in $\alpha$-U. Furthermore, this effect is supported by the calculations of Fermi surface and phonon mode, in which the topological objects and the dynamical instability show opposite behaviors between strains along $a$/$b$ and $c$ axes.     

Supramolecular Arrangement and DFT analysis of Zinc(II) Schiff Bases: An Insight towards the Influence of Compartmental Ligands on Binding Interaction with Protein

We report, for the first time, a detailed crystallographic study of the supramolecular arrangement for a set of zinc(II) Schiff base complexes containing the ligand 2,6-bis((E)-((2-(dimethylamino)ethyl)imino)methyl)-4-R-phenol], where R=methyl/tert-butyl/chloro. The supramolecular study acts as a pre-screening tool for selecting the compartmental ligand R of the Schiff base for effective binding with a targeted protein, bovine serum albumin (BSA). The most stable hexagonal arrangement of the complex [Zn − Me] (R=Me) stabilises the ligand with the highest FMO energy gap (ΔE=4.22 eV) and lowest number of conformations during binding with BSA. In contrast, formation of unstable 3D columnar vertebra for [Zn − Cl] (R=Cl) tend to activate the system with lowest FMO gap (3.75 eV) with highest spontaneity factor in molecular docking. Molecular docking analyses reported in terms of 2D LigPlot+ identified site A, a cleft of domains IB, IIIA and IIIB, as the most probable protein binding site of BSA. Arg144, Glu424, Ser428, Ile455 and Lys114 form the most probable interactions irrespective of the type of compartmental ligands R of the Schiff base whereas Arg185, Glu519, His145, Ile522 act as the differentiating residues with ΔG=−7.3 kcal mol⁻¹.     

基于电化学老化衰退模型的锂离子动力电池外特性

当前锂离子动力电池电化学模型存在模型复杂、建模难度大、计算效率低、老化评估效果差的问题,本文提出一种考虑电池衰退老化的机理模型(ADME).本文首先通过有限差分法对伪二维(P2D)电化学模型进行离散降阶处理,得到简化伪二维(SP2D)模型.在SP2D模型的基础上,基于阴阳两极发生的副反应导致的衰退老化现象,提出一种考虑电池衰退老化的机理模型.其次,使用多变量偏差补偿最小二乘法实现模型参数辨识.最后通过动力电池衰退老化性能循环实验,对比分析了恒流、脉冲工况下SP2D模型和ADME模型的终端电压输出.结果表明:ADME模型较为简单、计算效率和估算精度高,可以有效评估电池容量老化衰退,得到理想的锂离子动力电池外特性曲线.     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Design of a 6-DOF force device for virtual assembly (FDVA-6) of mechanical parts

Among different interaction modalities, force feedback is one of the key technologies to increase the interactivity and immersion of a virtual assembly process. This paper presents a 6-DOF force device with its forward kinematic analysis, workspace simulation, and gravity compensation. To evaluate the device, a prototype system is developed and a case study is conducted to assemble a mechanical product. The users have given positive feedback on the gravity compensation implemented and the general performance of the device.     

Divagations about the periodic table: Boolean hypercube and quantum similarity connections

In this study, several simple aspects associated with the periodic table (PT) of the elements are commented. First, the connection of the PT with the structure of a seven-dimensional Boolean hypercube leads afterward to discuss the nature of those PT elements bearing prime atomic numbers. Second, the use of quantum similarity (QS) to obtain an alternative insight on the PT element relations will be also developed. The foundation of the second part starts admitting that any element of the PT can be attached to a schematic electronic density function, constructed with a single Gaussian function: a Gaussian atomic density function, allowing to consider the PT elements as a set of quantum objects, and permits a straightforward construction of a QS matrix. Such QS scheme can be applied to the whole PT or to any subset of it. Manipulation of the QS matrices attached to any quantum object set allows the evaluation of statistical-like values, acting as coordinates to numerically or graphically represent the chosen PT atomic element sets. © 2019 Wiley Periodicals, Inc.     

XPS study of silicon spheres as a density standard

As density is one of the basic physical properties of materials, an accurate density standard is absolutely essential. To determine density with high accuracy and precision, two 1-kg single-crystal silicon spheres (NMIJ-S4 and NMIJ-S5) are used as the primary standard at the National Metrology Institute of Japan. For the accurate measurement of the mass and volume of the silicon spheres, the effects of the surface layer must be carefully considered. In this work, a surface layer model of NMIJ-S4 and NMIJ-S5 was proposed and the thicknesses of each surface layer were determined using X-ray photoelectron spectroscopy. A detailed uncertainty budget is presented to aid use of the density standard.     

Synthesis,spectroscopic, DFT,biological studies and molecular docking of oxovanadium (IV), copper (II) and iron (III) complexes of a new hydrazone derived from heterocyclic hydrazide

A new Schiff base hydrazone (Z)‐2‐(2‐aminothiazol‐4‐yl)‐N′‐(2‐hydroxy‐3‐methoxybenzylidene) acetohydrazide (H₂L) and its chelates [VO (HL)₂]·5H₂O, [Cu (HL)Cl(H₂O)]·2H₂O and [Fe(L)Cl(H₂O)₂]·3H₂O have been isolated and characterized using different physico‐chemical methods, for example infrared (IR), electron paramagnetic resonance (EPR), thermogravimetric analysis and DTG in the solid state, and ¹H‐NMR, ¹³C‐NMR and UV in solution. Magnetic and UV–visible measurements proposed that the coordination environments are square pyramidal, tetrahedral and octahedral geometries for oxovanadium (IV), Cu (II) and Fe (III), respectively. The ligand acts as mono‐negative NO towards oxovanadium (IV) and Cu (II) ions, and bi‐negative ONO for Fe (III) ion. The geometries of the ligand and its complexes were performed using Gaussian 9 program with density functional theory. The EPR spectral data of oxovanadium (IV) and Cu (II) chelates confirmed the mentioned geometries. The molecular modeling was done, and illustrated bond lengths, bond angles, molecular electrostatic potential, Mulliken atomic charges and chemical reactivity for the inspected compounds. Theoretical IR and ¹H‐NMR of the free ligand were calculated. Furthermore, thermodynamic and kinetic parameters for thermal decomposition steps were studied. Docking study of H₂L was applied against the proteins of both bacterial strains Staphylococcus aureus and Escherichia coli, as well as the protein of xanthine oxidase as antioxidant agent by Schrödinger suite program utilizing XP glide protocol. Furthermore, antimicrobial, antioxidant and DNA‐binding activities of the compounds have been carried out.     

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

During machining processes, materials undergo severe deformations that lead to different behavior than in the case of slow deformation. The microstructure changes, as a consequence, affect the materials properties and therefore influence the functionality of the component. Developing material models capable of capturing such changes is therefore critical to better understand the interaction process–materials. In this paper, we introduce a new physics model associating Mechanical Threshold Stress (MTS) with Dislocation Density (DD) models. The modeling and the experimental results of a series of large strain experiments on polycrystalline copper (OFHC) involving sequences of shear deformation and strain rate (varying from quasi-static to dynamic) are very similar to those observed in processes such as machining. The Kocks–Mecking model, using the mechanical threshold stress as an internal state variable, correlates well with experimental results and strain rate jump experiments. This model was compared to the well-known Johnson–Cook model that showed some shortcomings in capturing the stain jump. The results show a high effect of rate sensitivity of strain hardening at large strains. Coupling the mechanical threshold stress dislocation density (MTS–DD), material models were implemented in the Abaqus/Explicit FE code. The model shows potentialities in predicting an increase in dislocation density and a reduction in cell size. It could ideally be used in the modeling of machining processes.