应用浮动冲击平台考核舰载设备响应分析

为研究安装甲板模拟器的浮动冲击平台系统考核舰载设备的机理，对整个系统建立有限元模型进行数值模拟并建立力学模型进行了理论分析。根据船体甲板结构产生的垂向低通滤波特性，提出甲板模拟器具有减缓高频冲击并满足设备安装频率要求的作用。将被试设备的浮动冲击平台考核系统简化为有阻尼的三自由度系统强迫振动模型，通过拉普拉斯变换方法求解了不同冲击环境下被试设备的响应。数值模拟与理论计算结果比较吻合，被试设备响应迅速达到峰值后逐渐衰减，振动频率由高频向低频过渡，在分析浮动冲击平台舰载设备考核系统长时间响应时需考虑阻尼的影响。     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

Scattering of Tollmien-Schlichting waves by localized roughness in transonic boundary layers

The laminar-turbulent transition in boundary-layer flows is often affected by wall imperfections, because the latter may interact with either the freestream perturbations or the oncoming boundary-layer instability modes, leading to a modification of the accumulation of the normal modes. The present paper particularly focuses on the latter mechanism in a transonic boundary layer, namely, the effect of a two-dimensional(2 D) roughness element on the oncoming Tollmien-Schlichting(T-S) modes when they propagate through the region of the rapid mean-flow distortion induced by the roughness. The wave scattering is analyzed by adapting the local scattering theory developed for subsonic boundary layers(WU, X. S. and DONG, M. A local scattering theory for the effects of isolated roughness on boundary-layer instability and transition: transmission coefficient as an eigenvalue. Journal of Fluid Mechanics, 794, 68–108(2006)) to the transonic regime, and a transmission coefficient is introduced to characterize the effect of the roughness. In the sub-transonic regime, in which the Mach number is close to, but less than, 1, the scattering system reduces to an eigenvalue problem with the transmission coefficient being the eigenvalue; while in the super-transonic regime, in which the Mach number is slightly greater than 1, the scattering system becomes a high-dimensional group of linear equations with the transmission coefficient being solved afterward. In the largeReynolds-number asymptotic theory, the K′arm′an-Guderley parameter is introduced to quantify the effect of the Mach number. A systematical parametric study is carried out,and the dependence of the transmission coefficient on the roughness shape, the frequency of the oncoming mode, and the K′arm′an-Guderley parameter is provided.     

Measurement of concrete internal strain using a three-dimensional transducer system

A new three-dimensional transducer system is introduced in this paper, which enables the measurement of six internal components of strain tensor in concrete members. Laboratory tests and strain analyses were carried out to evaluate this tranducer system. The results show that the system is effective in measuring internal strains of concrete members. It was then embedded in a reinforced concrete bridge deck in Macomb County, Michigan. Field tests were conducted to measure the strains in the deck under truck wheel load. The results were used to understand the deck's strain and stress behavior under truck wheel load.     

The polynomial reconstruction problem: The first 50 years

The problem of reconstructing the characteristic polynomial of a graph of order at least 3 from the collection of characteristic polynomials of its vertex-deleted subgraphs was posed by Cvetkovi? in 1973 as a spectral counter part to the well-known Ulam's reconstruction conjecture. Over the last 50 years, this problem has received notable attention, many positive results have been obtained, but in the general case the problem is still unresolved. In particular, no counter example is found in literature. In this expository paper we survey classical and some more recent results concerning the polynomial reconstruction problem, discuss some related problems, variations and generalizations.     

基于非齐次复合Poisson过程的正交异性钢桥面板细节疲劳裂纹随机扩展研究

传统的正交异性钢桥面板疲劳损伤评估常采用确定性和可靠性分析方法,忽略了疲劳裂纹扩展的随机性影响,针对这一问题,提出钢桥面板细节疲劳随机扩展分析方法。本文以南溪长江大桥为工程背景,基于长期车辆荷载监测数据,建立了车辆荷载非齐次复合Poisson过程模型。建立钢桥面板有限元模型,采用瞬态分析方法将随机车辆荷载转化成细节疲劳应力,基于线弹性断裂力学理论推导U肋-顶板焊接细节疲劳裂纹扩展时变微分方程,实现宏观关系式疲劳应力幅次数-疲劳损伤至微观表达式应力时间序列-疲劳损伤转换,讨论了车载次序及超载对疲劳裂纹扩展的影响。研究结果表明,非齐次复合泊松过程模型能够较好描述随机车流运营状态,车辆荷载的次序对疲劳裂纹扩展速率的影响不可忽略,重车排序靠前时能够促使疲劳裂纹扩展增速,南溪长江大桥细节点的车辆超载迟滞效应修正系数取值0.804。     

不规则单斜地层中磁弹性剪切波的色散方程

在内夹磁弹性单斜地层中,下界面不规则变化时,研究水平偏振剪切波的传播,该地层夹在两个半无限磁弹性单斜介质之间,得到了闭式的色散方程.不计磁场及介质界面的不规则性,该色散方程与三层介质中经典方程相一致.图示了磁场和界面不规则深度对相速度的影响.     

用云纹干涉法测量和研究双层钴合金的挠度

运用云纹干涉原理对双层钴-合金材料进行三点弯曲试验,测试其常温与高温条件下的挠度值.通过大量试验,且与千分表测试的挠度值进行比较.结果表明,常温条件下的云纹测试挠度值与千分表法可以达到同样的精确度.同时,该实验方法体现了高温云纹干涉法在材料高温力学性能测试方面的优越性.高温云纹法是非接触式测量,在高温环境下有效地解决了量具高温变形的困难,且结合云纹图像可以对试件受力动态变形情况进行实时观测和分析,是一种较为精确测试常温及高温挠度的新方法.     

Analysis of banding problem in multiple beam scanning system of laser printer

In the slant scanning method of multiple beams a misalignment of the slant angle causes a beam spacing error and pitch irregularities of scan lines called “banding”. This paper evaluates the pitch irregularities and tries to clarify the allowable beam spacing error. The following results are obtained: (1) The maximum spacing error of print lines is proportional to m/(dpi), where m is the number of multiple beams and dpi print dot density. (2) The noticeable limit of periodic variations of print density at low spatial frequency was presumed to be a visibility between 1 and 2% in experiments. (3) The allowable beam spacing error was calculated introducing the human eye spatial frequency response. (4) The banding simulation experiments by laser recording on the photographic paper on the XY stage showed good coincidence with the theoretical evaluations.     

Semi-empirical likelihood confidence intervals for the differences of quantiles with missing data

Detecting population （group） differences is useful in many applications, such as medical research. In this paper, we explore the probabilistic theory for identifying the quantile differences .between two populations. Suppose that there are two populations x and y with missing data on both of them, where x is nonparametric and y is parametric. We are interested in constructing confidence intervals on the quantile differences of x and y. Random hot deck imputation is used to fill in missing data. Semi-empirical likelihood confidence intervals on the differences are constructed.