小孔流速实验中的排水时间和流量系数的研究

本文以水作为理想流体,考虑到水头损失和孔口缩流效应,对小孔流速实验涉及的容器排水问题进行了系统的理论和实验研究.从理论上推导得出了圆柱形容器排水时间的解析解,分析了排水时间和自由液面速度、流量系数之间的规律,提出了排水时间的等效性.实验上,加工了底部开有不同小孔的大型圆柱形容器,测量了容器排水时间随液面高度的变化关系,借助实验结果计算了流量系数值,验证了容器排水时间的等效性关系,实验结果与理论计算符合较好.     

亲水头基大小对正负离子表面活性剂混合体系的影响

<正>负离子表面活性剂混合体系曾被认为是表面活性剂配方的禁忌,但通过增大表面活性剂头基的面积,正负混合体系在很宽的物质的量比下都不会产生沉淀,而且还会产生显著的增效效应。头基大的离子型表面活性剂甚至能够用来增溶难溶的反电荷表面活性剂。     

The use of online heart‐cutting high‐performance liquid chromatography coupled with linear ion trap mass spectrometry in the identification of impurities in vidarabine monophosphate

It is difficult to identify unknown impurities in nucleotide analogues by mass spectrometry because mass‐spectrometry‐incompatible mobile phases need to be used to separate the major ingredient from impurities. In this study, vidarabine monophosphate was selected, and unknown impurities were identified by online heart‐cutting two‐dimensional high‐performance liquid chromatography and linear ion trap mass spectrometry. The one‐dimensional reversed‐phase column was filled with a mobile phase containing nonvolatile salt. In two‐dimensional high‐performance liquid chromatography, we used an Acclaim Q1 column with volatile salt, and the detection wavelength was 260 nm. The mass spectrum was scanned in positive‐ and negative‐ion mode. The online heart‐cutting and online demineralization technique ensured that the mobile phase was compatible with mass spectrometry; seven impurities were identified by MS² and MS³ fragments. The mass fragmentation patterns of these impurities were investigated. The two isomers were semiprepared and complemented by nuclear magnetic resonance. The results were further compared with those of normal‐phase high‐performance liquid chromatography with mass spectrometry. The online heart‐cutting two‐dimensional high‐performance liquid chromatography with mass spectrometry was superior in identifying more impurities. The method solves the problem of incompatibility between the mobile phase and mass spectrometry, so it is suitable for identifying unknown impurities. This method may also be used for investigating impurities in other nucleotide analogues.     

Effect of Botanical Extracts on the Growth and Nutritional Quality of Field-Grown White Head Cabbage (Brassica oleracea var. capitata)

Nutraceuticals and functional foods are gaining more attention amongst consumers interested in nutritious food. The consumption of foodstuffs with a high content of phytochemicals has been proven to provide various health benefits. The application of biostimulants is a potential strategy to fortify cultivated plants with beneficial bioactive compounds. Nevertheless, it has not yet been established whether the proposed higher plants (St. John’s wort, giant goldenrod, common dandelion, red clover, nettle, and valerian) are appropriate for the production of potential bio-products enhancing the nutritional value of white cabbage. Therefore, this research examines the impact of botanical extracts on the growth and nutritional quality of cabbage grown under field conditions. Two extraction methods were used for the production of water-based bio-products, namely: ultrasound-assisted extraction and mechanical homogenisation. Bio-products were applied as foliar sprays to evaluate their impact on total yield, dry weight, photosynthetic pigments, polyphenols, antioxidant activity, vitamin C, nitrates, micro- and macroelements, volatile compounds, fatty acids, sterols, and sugars. Botanical extracts showed different effects on the examined parameters. The best results in terms of physiological and biochemical properties of cabbage were obtained for extracts from common dandelion, valerian, nettle, and giant goldenrod. When enriched with nutrients, vegetables can constitute a valuable component of functional food.     

Steady-State Source Flow in Heterogeneous Porous Media

The flow of fluids in heterogeneous porous media is modelled by regarding the hydraulic conductivity as a stationary random space function. The flow variables, the pressure head and velocity field are random functions as well and we are interested primarily in calculating their mean values. The latter had been intensively studied in the past for flows uniform in the average. It has been shown that the average Darcy's law, which relates the mean pressure head gradient to the mean velocity, is given by a local linear relationship. As a result, the mean head and velocity satisfy the local flow equations in a fictitious homogeneous medium of effective conductivity. However, recent analysis has shown that for nonuniform flows the effective Darcy's law is determined by a nonlocal relationship of a convolution type. Hence, the average flow equations for the mean head are expressed as a linear integro-differential operator. Due to the linearity of the problem, it is useful to derive the mean head distribution for a flow by a source of unit discharge. This distribution represents a fundamental solution of the average flow equations and is called the mean Green function G _d (x). The mean head G _d(x) is derived here at first order in the logconductivity variance for an arbitrary correlation function (x) and for any dimensionality d of the flow. It is obtained as a product of the solution G _d ⁽⁰⁾(x) for source flow in unbounded domain of the mean conductivity K _A and the correction _d (x) which depends on the medium heterogeneous structure. The correction _d is evaluated for a few cases of interest.Simple one-quadrature expressions of _d are derived for isotropic two- and three-dimensional media. The quadratures can be calculated analytically after specifying (x) and closed form expressions are derived for exponential and Gaussian correlations. The flow toward a source in a three-dimensional heterogeneous medium of axisymmetric anisotropy is studied in detail by deriving ₃ as function of the distance from the source x and of the azimuthal angle . Its dependence on x, on the particular (x) and on the anisotropy ratio is illustrated in the plane of isotropy (=0) and along the anisotropy axis ( = /2).The head factor k ^* is defined as a ratio of the head in the homogeneous medium to the mean head, k ^*=G _d ⁽⁰⁾/G _d= _d ^–1. It is shown that for isotropic conductivity and for any dimensionality of the flow the medium behaves as a one-dimensional and as an effective one close and far from the source, respectively, that is, lim _x0 k ^*(x) = K _H/K _A and lim _x k ^*(x) = K ^efu/K _A, where K _A and K _H are the arithmetic and harmonic conductivity means and K ^efu is the effective conductivity for uniform flow. For axisymmetric heterogeneity the far-distance limit depends on the direction. Thus, in the coordinate system of (x) principal directions the limit values of k ^* are obtained as . These values differ from the corresponding components of the effective conductivities tensor for uniform flow for = 0 and /2, respectively. The results of the study are applied to solving the problem of the dipole well flow. The dependence of the mean head drop between the injection and production chambers on the anisotropy of the conductivity and the distance between the chambers is analyzed.     

聚晶立方氮化硼刀具切削高锰钢的磨损机制

在半精加工试验条件(切削深度ap=0．5mm，进给量f=0．3mm／r，干切)下研究了聚晶立方氮化硼刀具切削奥氏体高锰钢时的磨损机制，用WDH-Ⅱ型光电温度计测量了切削温度，用工具显微镜测量后刀面磨损量，进而考察了切削时间和切削速度对后刀面磨损量的影响，采用S-250MK型扫描电子显微镜观察刀具前、后刀面的磨损形貌和组成变化．结果表明：当切削温度为400～750℃时，聚晶立方氮化硼刀具同高锰钢中的γ相及其析出相(Fe，Mn)3C之间产生严重的机械磨损；当切削温度超过800℃时，聚晶立方氮化硼刀具同高锰钢单一γ相之间产生扩散磨损；聚晶立方氮化硼刀具适合于高速切削.     

TiB2增强Al2O3陶瓷刀具高速干切削摩擦磨损性能

采用TiB2增强Al2O3陶瓷刀具对淬硬钢进行高速干切削试验,利用切削高温作用下的摩擦化学反应,在刀具表面原位生成具有润滑作用的反应膜,从而实现Al2O3/TiB2陶瓷刀具的自润滑.结果表明:低速干切削时,Al2O3/TiB2陶瓷刀具的磨损机制主要表现为粘着磨损和磨料磨损;而在高速干切削时,刀具的磨损机制主要表现为氧化磨损,刀具表面经由氧化反应生成具有润滑作用的反应膜而起到固体润滑作用,从而使刀具的耐磨性能提高,随着TiB2含量和切削速度的增加,反应膜的减摩抗磨作用增强;而在切削区通入氮气时,由于刀具表面氧化膜形成受阻,刀具的抗磨能力有所降低.     

高速列车外形的气动性能数值计算和头部外形的改进

运用流体力学数值计算软件CFX对我国200km／h电动旅客列车的空气动力性能进行了数值模拟计算，针对列车气动外形存在的问题，对列车头部外形进行了改进，并提出了三种列车头部外形改进方案且对其进行了数值模拟研究。计算结果表明，方案三优于其它两种方案，且较改进前列车的空气动力性能有了较大改善。     

CrN镀层的微粒磨损性能及其切削行为研究

在Teer UDP 550型闭合场非平衡磁控溅射离子镀设备上制备CrN镀层,以球-盘方法测定的比磨损率和微粒磨损法测定的微粒磨损率评价CrN镀层的耐磨性能,采用高速钢镀层钻头的钻孔数评价镀层的切削性能.结果表明,CrN镀层的微粒磨损率对氮流量(用光谱发射因子OEM值控制)的变化很敏感,而比磨损率却不能反映这种由于氮流量变化带来的镀层结构和性能的变化.在不同偏压条件下所制备的镀层微粒磨损率变化不明显.当微粒磨损率低于某一值时,CrN镀层的钻孔寿命明显提高,而比磨损率则无此规律.     

磁头/磁盘滑动接触下磁盘温度及热退磁临界条件的研究

采用二维轴对称有限元模型计算磁头/磁盘滑动接触下,铝质磁盘的稳态温度和热应力场以及热退磁临界条件.结果表明:磁盘温度在极短时间内升至摩擦稳态值,然后缓慢线性升高到最终稳态值;经过充分热传导和热交换后磁盘的温度梯度较小,此时磁层内的热应力集中分布于磁盘固定端边缘附近;磁盘的稳态温度和热应力均随速度增大而增大,且载荷越大其值增大越快;热应力小于1.2 GPa时所对应的速度和载荷为安全工况;温升大于373 K时所对应的工况将导致磁盘退磁.