气相输运沉积制备c轴择优取向的碘化铋薄膜

铋基卤化物材料因其无毒和优良的光电性能而显示出巨大的应用潜力。BiI₃作为一种层状重金属半导体,已被用于X射线检测、γ射线检测和压力传感器等领域,最近其作为一种薄膜太阳能电池吸收材料备受关注。本文采用简单的气相输运沉积(VTD)法,以BiI₃晶体粉末作为蒸发源,在玻璃基底上得到高质量c轴择优取向的BiI₃薄膜。并通过研究蒸发源温度和沉积距离对薄膜物相和形貌的影响,分析了BiI₃薄膜择优生长的机理。结果表明VTD法制备的BiI₃薄膜属于三斜晶系,其光学带隙为~1.8 eV。沉积温度对薄膜的择优取向有较大影响,在沉积温度低于270 ℃时,沉积的薄膜具有沿c轴择优取向生长的特点,超过此温度,c轴择优取向生长消失。在衬底温度为250 ℃、沉积距离为15 cm时制备的薄膜结晶性能最好,晶体形貌为片状八面体。     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

全局优化问题的一个新的无参数填充函数

求全局最优化问题的填充函数算法被提出以来，参数的选取和调整一直是制约算法有效性的因素。如何在实际的计算过程中选取合适的参数，直接影响和决定了运算速度和效率。因此，构造不含参数的填充函数就显得极为重要。提出一个新的无参数的填充函数，对其理论性质进行了分析，并给出相应的填充函数算法，数值计算验证了算法的有效性。     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Improving the gas barrier,mechanical and thermal properties of poly(vinyl alcohol) with molybdenum disulfide nanosheets

New multifunctional materials with both high structural and gas barrier performances are important for a range of applications. Herein we present a one‐step mechanochemical process to prepare molybdenum disulfide (MoS₂) nanosheets with hydroxy functional groups that can simultaneously improve mechanical strength, thermal conductivity, and gas permittivity of a polymer composite. By homogeneously incorporating these functionalized MoS₂ nanosheets at low loading of less than 1 vol %, a poly(vinyl alcohol) (PVA) polymer exhibits elongation at break of 154%, toughness of 82 MJ/m³, and in‐plane thermal conductivity of 2.31 W/m K. Furthermore, this composite exhibits significant gas barrier performance, reducing the permeability of helium by 95%. Under fire condition, the MoS₂ nanosheets form thermally stable char, thus enhancing the material's resistance to fire. Hydrogen bonding has been identified as the main interaction mechanism between the nanofillers and the polymer matrix. The present results suggest that the PVA composite reinforced with 2D layered nanomaterial offers great potentials in packaging and fire retardant applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 406–414     

掺锗提高VO2薄膜的相变温度机理研究

二氧化钒(VO₂)作为一种长久以来备受关注的新型可逆相变材料,发展潜力巨大,其相变温度(T_MIT)的调控一直是研究热点。本文主要利用锗离子作为掺杂离子探索其对VO₂薄膜T_MIT的影响,并尝试解释其内部作用机理。在约1 cm²大小抛光的氧化铝薄片上沉积了一系列含不同比例锗离子VO₂薄膜。研究发现锗离子作为掺杂离子确实有利于T_MIT的提高(本课题T_MIT最大可达84.7 ℃)。T_MIT提高的主要原因是锗离子的引入能够强化单斜态V-V二聚体的稳定性,进而增强单斜态的稳定性,使得低温单斜态向四方金红石态转变更加困难。     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

旋涂法制备WO3薄膜电致变色性能

"智能窗"大规模推广顺应可持续发展潮流,三氧化钨(WO_3)是生产"智能窗"的一种重要电致变色材料,但调控WO_3薄膜电致变色性能机制仍待进一步研究。采用旋涂法制备WO_3薄膜,重点研究了溶液浓度和旋涂次数对调控WO_3薄膜电致变色性能的影响。通过表面轮廓仪测量薄膜厚度,X射线衍射(XRD)测量薄膜结晶情况,原子力显微镜(AFM)和扫描电子显微镜(SEM)分析薄膜表面形貌,光谱仪测量薄膜初始态、着色态和褪色态的透射率。实验结果表明,随着溶液浓度增加(0. 2～1. 0 mol/L),薄膜厚度从9. 7 nm增加到33. 3 nm,透射率调制能力从0%提升到37. 0%;多次旋涂薄膜厚度线性增长,线性拟合优度(R~2)达0. 98,5次旋涂后透射率调制能力达51. 3%。改变溶液浓度和旋涂次数都是调控薄膜透射率调制能力的有效手段,精准调控薄膜透射率调制能力对设计不同应用场景的电致变色器件具有重大意义。     

An asymptotic Reissner–Mindlin plate model

A mathematical study via variational convergence of a periodic distribution of classical linearly elastic thin plates softly abutted together shows that it is not necessary to use a different continuum model nor to make constitutive symmetry hypothesis as starting points to deduce the Reissner–Mindlin plate model.