Dynamics of laser-induced cavitation bubble during expansion over sharp-edge geometry submerged in liquid – an inside view by diffuse illumination

Laser ablation in liquids is growing in popularity for various applications including nanoparticle production, breakdown spectroscopy, and surface functionalization. When laser pulse ablates the solid target submerged in liquid, a cavitation bubble develops. In case of “finite” geometries of ablated solids, liquid dynamical phenomena can occur inside the bubble when the bubble overflows the surface edge. To observe this dynamics, we use diffuse illumination of a flashlamp in combination with a high-speed videography by exposure times down to 250 ns. The developed theoretical modelling and its comparison with the experimental observations clearly prove that this approach widens the observable area inside the bubble. We thereby use it to study the dynamics of laser-induced cavitation bubble during its expansion over a sharp-edge (“cliff-like” 90°) geometry submerged in water, ethanol, and polyethylene glycol 300. The samples are 17 mm wide stainless steel plates with thickness in the range of 0.025–2 mm. Bubbles are induced on the samples by 1064-nm laser pulses with pulse durations of 7–60 ns and pulse energies of 10–55 mJ. We observe formation of a fixed-type secondary cavity behind the edge where low-pressure area develops due to bubble-driven flow of the liquid. This occurs when the velocity of liquid overflow exceeds ~20 m s⁻¹. A re-entrant liquid injection with up to ~40 m s⁻¹ velocity may occur inside the bubble when the bubble overflows the edge of the sample. Formation and characteristics of the jet evidently depend on the relation between the breakdown-edge offset and the bubble energy, as well as the properties of the surrounding liquid. Higher viscosity of the liquid prevents the generation of the jet.     

空化可压缩流动空穴溃灭激波特性研究

为深入研究空化可压缩流动中空泡/空泡团溃灭过程中激波产生、传播及其与空穴相互作用规律,本文采用数值模拟方法对空化可压缩流动空穴溃灭激波特性展开了研究.数值计算基于OpenFOAM开源程序,综合考虑蒸汽相和液相的压缩性,通过在原无相变两相可压缩求解器的控制方程中耦合模拟空化汽液相间质量交换的源项,实现了对空化流动的非定常可压缩计算.利用上述考虑汽/液相可压缩性的空化流动求解器,对周期性云状空化流动进行了数值模拟,并重点研究了空穴溃灭激波特性.结果表明:上述数值计算方法可以准确捕捉到空穴非定常演化过程及大尺度脱落空泡云团溃灭激波现象,大尺度脱落空泡云团溃灭过程分为3个阶段:(1) U型空泡团形成; (2) U型空泡团头部溃灭; (3) U型空泡团腿部溃灭.在U 型空泡团腿部溃灭瞬间,观察到激波产生,并向上游和下游传播,向上游传播的激波与空穴相互作用,导致水翼吸力面新生的附着型片状空穴回缩,直至完全溃灭.并且空穴溃灭激波存在回弹现象, 抑制了下一周期的空化发展.      

多片导模法蓝宝石晶体的缺陷研究

使用导模法(EFG)生长了多片a面蓝宝石晶体。显微拉曼光谱结合电感耦合等离子体发射光谱(ICP-AES)测试得出晶体的气泡中可能存在含S化合物。晶体表面明显的生长条纹主要与温度、生长速度的波动以及模具的加工精度有关。化学腐蚀分析表明晶体位错密度在4.2×10⁴ cm^-2,未存在小角度晶界缺陷,双晶摇摆曲线半峰宽(FWHM)为70.63″。由于采用石墨保温材料,晶体中存在F心与F⁺色心。晶体在400~3 000 nm波段透过率高于80%,空气中退火后可减弱色心吸收。本文研究结果可为蓝宝石晶体缺陷形成理论研究提供参考,也可为导模法蓝宝石工业生产技术改进提供借鉴。     

Effect of intramolecular crosslinker properties on the mechanochemical fragmentation of covalently folded polymers

The mechanochemical stability of polymers in solution is enhanced if the chains are covalently folded. Under shear forces, the additional bonds absorb mechanical energy and inhibit unfolding, and as a result, slow down fragmentation. However, not all crosslinkers are equal in terms of their properties (length, strength, etc.). In order to understand the role of these added bonds in the polymers' stability under mechanical stress, a thorough study compares the rate of mechanochemistry on single-chain polymer nanoparticles which have been folded with crosslinkers with different lengths, strengths, positioning, and valencies. The usage of bonds with different mechanical strengths in the crosslinkers was found to be the most powerful way to change the mechanochemical fragmentation rate. In addition, positioning and valency also play significant role in the mechanical stabilization mechanism. © 2020 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2020 © 2020 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2020 , 58, 692–703     

Simulating bubble dynamics in a buoyant system

Multiphase flows are critical components of many physical systems; however, numerical models of multiphase flows with large parameter gradients can be challenging. Here, two different numerical methods, volume of fluid (VOF) and smoothed particle hydrodynamics (SPH), are used to model the buoyant rise of isolated gas bubbles through quiescent fluids for a range of Bond and Reynolds numbers. The VOF is an Eulerian grid–based method, whereas the SPH is Lagrangian and mesh free. Each method has unique strengths and weaknesses, and a comparison of the two approaches as applied to multiphase phenomena has not previously been performed. The VOF and SPH simulations are compared, verified, and validated. Results using two-dimensional VOF and SPH simulations are similar to each other and are able to reproduce numerical benchmarks and experimental results for sufficiently large Morton and Reynolds numbers. It is also shown that at low Reynolds numbers, the two methods, SPH and VOF, diverge in the transient regime of the bubble rise. Regimes that require simulations capable of representing three-dimensional drag are identified as well as regimes in which results from VOF and SPH diverge.     

A Bubble‐Dragged Catalytic Polymer Microrocket

We report the bubble dragged microrocket consisting of functionalized multilayer polymer covered asymmetrically by platinum nanoparticles. The microrocket is pushed back during bubble growth over a small step and dragged forward over a big step during bubble explosion. Each bubble explosion induced a shock wave of gas which propagates in water at ultrafast speed. The bubble dragged microrocket can move along an approximate straight line instead of a fluctuating circle which is the trajectory of a bubble‐pushed microrocket in most cases, which makes it a promising candidate for drug delivery and simulating rod‐shaped bacteria.     

Motion of Enzyme‐Powered Microshell Motors

Microshells are attractive in constructing bubble‐propelled micromotors due to the lower energy consumption for bubbles forming on a concave surface. In this work, enzyme‐powered microshell motors were fabricated on multimetallic (Au/Ag/Au) microshells along with the modification of catalase on its concave surface. The catalase triggered the decomposition of hydrogen peroxide to oxygen gas, hence propelling the autonomous motion of microshell motors. A size‐dependent motion behaviour was observed for the microshell motors in the form of slow tremble and fast translation motion for a size smaller and larger than 5 μm, respectively, according to the size, generation efficiency and ejection mechanism of bubbles and the intensity of Brownian motion. In addition, the effect of fuel concentration on the motion speed of microshells was dependent on whether the bubble generation was affected by the limited mass transfer in the microshell space. These findings play an important role for the design of microshell motors.     

最大泡压法测表面张力等温线的数据处理方法比较*

对乙酸、丙酸、正丁酸、2-甲基丁酸、3-甲基丁酸、正戊酸、正己酸、乙醇、丙醇、异丙醇、正丁醇、异丁醇、1,2-丙二醇等13种常用试剂在25 ℃下的表面张力数据拟合方法进行了比较,分析了图解法处理数据及多项式、一阶指数函数、幂函数、Shishkovsky经验公式拟合数据的优缺点。指出Shishkovsky经验公式拟合结果准确,受数据样本量影响小,是理想的表面张力数据拟合方法。     

Dynamic Visualization of Free Radicals at Single Oxygen Bubbles using Chemiluminescence

The generation of free radicals is a key process in the formation and the collapse of the bubbles in water, however, the direct and dynamic observation of the radicals in this process at single bubbles has never been achieved. Here, the hydroxyl (OH^.) and oxygen (O₂^.−) radicals at single oxygen bubbles are continuously traced using chemiluminescence (CL), in which these radicals at the bubble react with the surrounding luminol in the solution emitting the light. Varied increase trends of luminescence are observed in the generation of a bubble, floating, short parking at the water/air interface and the final explosion, revealing the complexity in the distribution of radicals at the bubble unprecedentedly. Despite more radicals are observed at the bubble generated at a deep position under the water for the stabilization, almost the same amount of radicals are included in the bubbles that is independent on the water pressure during the production of the bubble. This rich information collected from the dynamic study of bubbles illustrates the complicated generation and distribution process of radicals at the bubbles, and will facilitate the understanding of the function about the bubbles.