Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

NUMERICAL SIMULATION OF FIBROBLAST DUROTAXIS MIGRATION INDUCED BY STIFFNESS GRADIENT OF SUBSTRATE1)

建立了一种细胞趋硬性迁移的理论模型和有限元分析框架,为连续变刚度人工基质的试验设计提供理论依据。考虑了细胞体的黏弹性属性,以及细胞与基质间的配受体动态反应过程,并以配受体合成时间为时间步长,将细胞运动方程化为静力学形式进行求解。对有限元过程提出一种动约束,便于消除其结构矩阵的奇异性。结果表明,模型能够模拟黏着斑内部力的快速波动现象,细胞的运动速度与观测数据一致,可有效模拟20,h以上的长时程问题。     

MECHANICAL ANALYSIS OF TOROFLUX

流动环是一款魔术玩具,具有丰富的力学行为。制作流动环时应用了预应力储存技术,使得环内部储存了弹性弯曲变形能。一经外界扰动,流动环会迅速张开,进入一种新的稳定平衡状态;若给张开的流体环输入某种形式的能量,环会合拢,恢复原有的稳定平衡状态。本文从能量的角度对流动环张开与合拢等现象进行力学分析。     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Synthesis and characterization of double hydrophilic block copolymers containing semi-rigid and flexible segments

3-Methyl-(E)-stilbene (3MSti) and 4-(diethylamino)-(E)-stilbene (DEASti) monomers are synthesized and polymerized separately with maleic anhydride (MAn) in a strictly alternating fashion using reversible addition-fragmentation chain transfer (RAFT) polymerization techniques. The optimal RAFT chain transfer agents (CTAs) for each copolymerization affect the reaction kinetics and CTA compatibilities. Psuedo-first order polymerization kinetics are demonstrated for the synthesis of poly((3-methyl-(E)-stilbene)-alt-maleic anhydride) (3MSti-alt-MAn) with a thiocarbonylthio CTA (methyl 2-(dodecylthiocarbonothioylthio)−2-methylpropionate, TTCMe). In contrast, a dithioester CTA (cumyl dithiobenzoate, CDB) controls the synthesis of poly((4-(diethylamino)-(E)-stilbene)-alt-maleic anhydride) (DEASti-alt-MAn) with pseudo-first order polymerization kinetics. DEASti-alt-MAn is chain extended with 4-acryloylmorpholine (ACMO) to synthesize diblock copolymers and subsequently converted to a double hydrophilic polyampholyte block copolymers (poly((4-(diethylamino)-(E)-stilbene)-alt-maleic acid))-b-acryloylmorpholine) (DEASti-alt-MA)-b-ACMO) via acid hydrolysis. The isoelectric point and dissociation behavior of these maleic acid-containing copolymers are determined using ζ-potential and acid–base titrations, respectively. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 219–227     

一种轿车车轮应力状态测量与分析方法

基于台架应变测试试验方法,研究轿车车轮在疲劳试验中的应力状态。结果表明:车轮的径向疲劳试验时,轮胎会对车轮的载荷产生较大的影响,轮胎与转鼓的挤压变形以及正反转动都会对车轮的应力状态产生影响;车轮径向疲劳试验时,最大应变出现在轮辋与轮胎接触位置沿车轮圆周方向,而在靠近轮心位置的应变较小;车轮弯曲疲劳试验时,最大应变出现在轮辐靠近轮心的位置,最大应变出现在轮辐的长度方向;不同的载荷对车轮应变的变化规律并没有影响,但是会对最大和最小峰值产生影响。     

Generalizing Rosenbluth's Algorithm to Include Along‐the‐Chain Intramolecular Energies

We incorporate the Boltzmann factors for inter‐monomer bending energy into the monomer growth direction choice in Rosenbluth's algorithm to model chains of arbitrary nearest‐neighbor rigidity. This allows for the consideration of compact (bent state lower in energy), free (straight and bent state equal in energy), or extended chains (bent state higher). We validate against, and compare to, various other results, showing very good agreement with known results for short chains and demonstrate the ability to model chains up to 500 segments long, far beyond the length at which the normal Rosenbluth method becomes unstable for reasonable nonzero bending energies. This approach is easily generalizable both to other energies determinable during chain growth, for example, polymers composed of more than one type of monomer with differing monomer interaction energies, as well as to other chain production algorithms. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1684–1691     

变刚度层叠梁的力学性能研究

为满足不同场景下的功能需求，变刚度结构得到越来越广泛的应用．以机器人手臂为例，在执行操作时，需要其手臂的结构刚度足够大，避免出现过大的扭曲和变形，而在与人交互时，又需要其结构足够柔软，以保证在此过程中与人交互的安全性．该类变刚度结构可根据需求通过外部激励在柔性和刚性状态之间自由切换．在该文章中，研究分析了层叠梁结构，通过理论推导和数值模拟，对其力学性能做出了很好的预测，同时为此类结构的研究提供了有效可靠的思路和方法．     

Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.