A numerical and experimental investigation of the interactions between a non‐uniform planar array of incompressible free jets

The interaction between multiple incompressible air jets has been studied numerically and experimentally. The numerical predictions have been first validated using experimental data for a single jet configuration. The spreading features of five unequal jets in the configuration of one larger central jet surrounded by four smaller equi‐distant jets, have been studied, for different lateral spacing ratios of 1.5, 2.0 and 2.5 and a central jet Reynolds number of 1.24×105 (corresponding to a Mach number of 0.16). Flow of five equal jets has also been simulated, for the sake of comparison. The jet interactions commence at an axial distance of about 3–4 diameters and complete by an axial distance of about 10 diameters for the lowest spacing ratio of 1.5. For larger spacing ratios, the length required for the start and completion of jet interaction increase. Peripheral jets bend more towards the central jet and merge at a smaller distance, when their sizes are smaller than that of the central jet. The entrainment ratio for multiple jets is higher than that for a single jet. Excellent agreement is observed between the experimental data and theoretical predictions for both mean flow field and turbulent quantities, at regions away from the jet inlet. The potential core length and initial jet development, however, are not predicted very accurately due to differences in the assumed and actual velocity profiles at the jet inlet. Copyright © 2004 John Wiley & Sons, Ltd.     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Conformation of Tax-response elements in the human T-cell leukemia virus type I promoter

Background: HTLV I Tax is believed to activate viral gene expression by binding bZIP proteins (such as CRIB) and increasing their affinities for proviral THE target sites. Each 21 by THE target site contains an imperfect copy of the intrinsically bent CRE target site (the TRE core) surrounded by highly conserved flanking sequences. These flanking sequences are essential for maximal increases in DNA affinity and transactivation, but they are not, apparently, contacted by protein. Here we employ non-denaturing gel electrophoresis to evaluate TRE conformation in the presence and absence of bZIP proteins, and to explore the role of DNA conformation in viral transactivation.Results: Our results show that the TRE-1 flanking sequences modulate the structure and modestly increase the affinity of a CREB bZIP peptide for the TRE-1 core recognition sequence. These flanking sequences are also essential for a maximal increase in stability of the CREB-DNA complex in the presence of Tax.Conclusions: The CRE-like TRE core and the TRE flanking sequences are both essential for formation of stable CRIB-TRE-1 and Tax-CREB-TRE-1 complexes. These two DNA segments may have co-evolved into a unique structure capable of recognizing Tax and a bZIP protein.     

大挠度弯曲直梁混合变量最小势能原理的应用

应用大挠度弯曲直梁混合变量最小势能原理,求解均载两端固定大挠度柱面弯曲板条的轴向挠度分布和轴向弯矩分布．实例计算表明:该方法简单实用、精度高,是一种计算大挠度柱面弯曲板条变形的有效方法．     

Study of Polymer-Cement Composite Containing Portland Cement and Aqueous Poly (methyl methacrylate) Latex Polymer by Fourier-Transform Infrared (FT-IR) Spectroscopy

The polymer-cement composite is an immiscible band having modified morphology. Polymer phase improves the toughness of brittle cement and has a reinforcing effect, and interactions between cement components and polymers provide stability. In this study, polymer latex [poly(methyl methacrylate), PMMA] – cement paste was prepared with different weight proportions of polymer content. The main scientific objective of this report has been the analysis and the prediction of high strength with the aim of understanding the interactions of PMMA polymer with Portland cement after hydration reaction of cement pastes and curing the specimens for 28 days. The samples were studied by Fourier transform infrared (FT-IR) spectroscopy. The results are critically examined. It is shown that bands support the interaction of PMMA with cement in the composite.     

Ozone‐Induced Band Bending on Metal‐Oxide Surfaces Studied under Environmental Conditions

Ozone adsorption and decomposition on metal oxides is of wide interest in technology and in atmospheric chemistry. Here, ozone‐adsorption‐induced band bending is observed on Ti‐ and Fe‐oxide model surfaces under dry and humid conditions. Photoelectron spectroscopic studies indicate the effect of charge transfer to O₃, which limits the surface coverage of the precursor to decomposition reactions. This is also consistent with the negative pressure dependence observed in previous studies. These results contribute to our fundamental understanding of ozone adsorption and decomposition mechanisms on metal oxides of environmental and technological relevance.     

Optimized IR synchrotron beamline design

Synchrotron infrared beamlines are powerful tools on which to perform spectroscopy on microscopic length scales but require working with large bending‐magnet source apertures in order to provide intense photon beams to the experiments. Many infrared beamlines use a single toroidal‐shaped mirror to focus the source emission which generates, for large apertures, beams with significant geometrical aberrations resulting from the shape of the source and the beamline optics. In this paper, an optical layout optimized for synchrotron infrared beamlines, that removes almost totally the geometrical aberrations of the source, is presented and analyzed. This layout is already operational on the IR beamline of the Brazilian synchrotron. An infrared beamline design based on a SOLEIL bending‐magnet source is given as an example, which could be useful for future IR beamline improvements at this facility.     

Investigation of flexural properties and failure behaviour of biaxial braided CFRP

In this research, the experimental tests of quasi-static three-point bending and three-point bending fatigue were carried out for a ±25° biaxial braided carbon fibre reinforced polymer (CFRP) manufactured using vacuum assisted resin transfer moulding (VARTM). A finite element (FE) model was also set up for quasi-static testing and the prediction results revealed that local fibre volume fraction (FVF) is a primary source affecting the mechanical properties of braided CFRP. The fatigue of the braided CFRP was defined as three different stages according to the flexural modulus results. The damage modes of the test specimens were observed via a digital microscope and scanning electron microscope (SEM) and the process-induced defects were summarised. With compiled results and observations, this study provides a better understanding of failure and fatigue behaviour of biaxial braided composites and their flexural properties which offers a good basis for any further research in fibre volume fractions, structure design and manufacturing for braided CFRP.     

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。