Evolution of electrical conductivity and semiconductor to metal transition of iron oxides at extreme conditions

Iron oxides are widely found as ores in Earth's crust and are also important constituents of its interiors. Their polymorphism, composition changes, and electronic structures play essential roles in controlling the structure and geodynamic properties of the solid Earth. While all-natural occurring iron oxides are semiconductors or insulators at ambient pressure, they start to metalize under pressure. Here in this work, we review the electronic conductivity and metallization of iron oxides under high-pressure conditions found in Earth's lower mantle. We summarize that the metallization of iron oxides is generally controlled by the pressure-induced bandgap closure near the Fermi level. After metallization, they possess much higher electrical and thermal conductivity, which will facilitate the thermal convection, support a more stable and thicker D^{$\prime\prime$} layer, and formulate Earth's magnetic field, all of which will constrain the large-scale dynamos of the mantle and core.     

新型多孔材料用作色谱手性固定相

手性固定相是色谱法分离分析手性化合物的关键。近年来,随着材料科学的迅速发展,越来越多的新型手性材料被作为色谱固定相用于手性分离分析。本文综述了近5年来液相色谱、气相色谱和毛细管电色谱领域的新型手性固定相的研究进展,重点总结了基于手性多孔材料的新型手性固定相研究,最后对手性固定相的研究进行了总结与展望。     

基于视觉辐条图案识别方法的蓝宝石引晶机制研究

工业生产蓝宝石晶体过程中,引晶步骤有着至关重要的地位。引晶必须在温度梯度较小,温度分布趋于稳定的条件下进行。目前,工业生产蓝宝石主要依靠人工经验操控籽晶杆实现引晶操作,但是人工引晶操作的准确性不高会导致成品品质不佳、资源浪费。为此,本文提出一种基于蓝宝石视觉辐条图案识别方法来检测蓝宝石熔体状态自由液面状态,从而实现一种高效率引晶的机制。此方法利用经典骨架化算法细化辐条图案,Harris算子实现特征信息的提取,提取的特征信息放入运动轨迹模型中判断熔体稳定性,分析液面温度分布稳定性从而实现引晶。结果表明,此算法具有有效性,蓝宝石晶体引晶效率大大提高,生产出的成品良率也有提升,可有效指导蓝宝石的工业生产。     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

Effect of pressure on the low-temperature reaction of ethylene with N2O4

Calorimetric monitoring of the autoclave reaction N₂O₄ + C₂H₄ at –85 to +10 °C under argon pressure 10–30 bar revealed that the exothermic chemical reaction started at temperatures above –52 °C at 10 bar, whereas an intensive exothermic reaction started at –85 °C and pressure of 30 bar. IR study showed that oligo/polynitroethylene was formed at 30 bar, while carbonyl and hydroxy compound as well as nitrate R–ONO₂ formation occurred upon processing at 10 bar.     

Functional Groups Assisted Tunable Dielectric Permittivity of Guest-Free Zn-Based Coordination Polymers for Gate Dielectrics

The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH₂) and electron-withdrawing (R=NO₂) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L₁)(L₂)]_n ( 1 ) and [Zn(L₁)(L₃)]_n ( 2 ) [L₁=2-(2-pyridyl) benzimidazole (Pbim), L₂=5-aminoisophthalate (Aip), and L₃=5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1 kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1 kHz). The electron donating and withdrawing effects of the NH₂ and NO₂ substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO₂ and NH₂. Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.     

热解吸反压低温等离子体电离源质谱检测食品中的邻苯二甲酸酯EI北大核心CSCD

基于低温等离子体设计并实现了一套热解吸反压低温等离子体电离(TD-iLTPI)装置。TD-iLTPI装置由热解吸模块和电离源模块集成在一个π型四通管上组成,进样探针取得样品后插入热解吸模块使其气化,之后随载气进入电离区域被电离。iLTPI内部的针电极接交流电,外部的环形电极接地,电极连接方式与LTP相反。该文对热解吸反压低温等离子体电离源进行了参数的优化,并与三重四极杆质谱联用检测了12种代表性的邻苯二甲酸酯,同时考察了TD-iLTPI-MS的分析性能,并对含有邻苯二甲酸酯的实际样品进行了检测。结果表明,邻苯二甲酸丁苄酯(BBP)的标准曲线具有良好的线性相关系数(R;=0.9958),加标回收率为89.7%~116.8%,相对标准偏差为4.5%~8.2%,对邻苯二甲酸酯的检出限也远低于其他敞开式离子源。对白酒、果汁、面包、奶酪和黄油中的邻苯二甲酸酯进行了快速筛查,并定量检测了果汁中的邻苯二甲酸丁苄酯。     

新型功能碳材料的高压截获

高性能功能材料在诸多领域具有广泛的应用前景,是人们一直关注的研究热点。高压可以有效地改变物质的原子间距和成键方式,是获得新型功能材料的重要途径。在碳材料的高压研究中,许多有趣的功能碳材料,如光学透明碳、高强度弹性碳和超硬非晶碳等,已经通过不同的碳前驱体合成。本文简要介绍了作者近年来在低维碳基纳米复合材料高压研究中取得的进展,基于设计的不同低维碳前驱体,高压下截获了具有超硬特性、新型压致共价聚合及发光增强的碳材料。