烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。     

Paraxial propagation of cosh-Airy vortex beams in chiral medium

Propagation dynamics of the cosh-Airy vortex(CAiV) beams in a chiral medium is investigated analytically with Huygens–Fresnel diffraction integral formula. The results show that the CAiV beams are split into the left circularly polarized vortex(LCPV) beams and the right circularly polarized vortex(RCPV) beams with different propagation trajectories in the chiral medium. We mainly investigate the effect of the cosh parameter on the propagation process of the CAiV beams.The propagation characteristics, including intensity distribution, propagation trajectory, peak intensity, main lobe's intensity, Poynting vector, and angular momentum are discussed in detail. We find that the cosh parameter affects the intensity distribution of the CAiV beams but not its propagation trajectory. As the cosh parameter increases, the distribution areas of the LCPV and RCPV beams become wider, and the side lobe's intensity and peak intensity become larger. Besides, the main lobe's intensity of the LCPV and RCPV beams increase with the increase of the cosh parameter at a farther propagation distance, which is confirmed by the variation trend of the Poynting vector. It is significant that we can vary the cosh parameter to control the intensity distribution, main lobe's intensity, and peak intensity of the CAiV beams without changing the propagation trajectory. Our results may provide some support for applications of the CAiV beams in optical micromanipulation.     

考虑塑性变形发展程度系数的RC梁开裂弯矩改进计算公式

针对RC梁开裂荷载计算方法尚未统一的现状，首先，结合18根RC梁试验数据对比了已有的6种RC梁开裂弯矩计算公式，发现开裂弯矩理论计算值与试验值的偏差大小和混凝土强度有关；然后，通过提出塑性变形发展程度系数k，推导新的RC梁开裂弯矩计算公式，并进一步基于k值和塑性影响系数计算值γ_k进行改进；最后，选取12根RC试验梁验证改进公式的准确性，证明改进公式的计算值与试验值吻合更好且偏于安全。     

Generation and Propagation of Optical Superoscillatory Vortex Arrays

Superoscillation is an intriguing wave phenomenon which enables subwavelength features propagating into far field and hence has potential applications in super‐resolution microscopy as well as particle trapping and manipulation. While previous demonstrations mostly concentrate on designing complicated nanostructures for generating uncontrollable superoscillatory functions, here a new technique which allows for creating polynomially shaped superoscillatory functions that contain phase singularity arrays is demonstrated both theoretically and experimentally. Such a technique is implemented in optical experiments for the first time and controllable superoscillatory lobes with feature much below the diffraction limit is achieved. More importantly, a general theoretical framework, which, to our knowledge, has not been reported before, is developed to show how the created superoscillations propagate to a distance of many Rayleigh ranges and eventually disappear when the distance is sufficiently larger. The validity of the model is confirmed by the experiments. The results may trigger further studies in light field shaping and manipulations in subwavelength scale.     

Experiments on crack identification in cantilever beams

In this paper we present an experimental investigation of the identification of crack location and size. By providing the first three natural frequencies through vibration measurements, curves of crack equivalent stiffness versus crack location are plotted, and the intersection of the three curves predicts the crack location and size. In the experiments, the cracked specimens were made using a wire-cut electrical discharge machine, and the cantilever beams were excited next to the free end by means of an impulse force hammer. In order to obtain the accurate natural frequencies from the transient signal measured, the method of zoom fast Fourier transform is adopted to improve frequency resolution. From experimental results, it is observed that the identification errors of crack location and size are less than 2% and 4%, respectively. The effectiveness of crack identification through vibration measurements is verified.     

等截面梁有限变形的传递函数增量算法

本文介绍了一种计算等截面梁有限变形的新方法－传递函数增量算法，它是一种半解析数值计算方法。此算法充分利用增量失空法Ｇａｕｓｓ求积公式计算非线性有限变形的特点，并将这些特点与传递函数方法，有效地结合起来，既避免了数值方法计算量大的困难，又使得求解高阶非线性微分方程的解析解成为可能，算例分析表明，这是一种易编程，计算量小，收敛快，求解精度高的行之有效的计算方法。     

多肢墙的线性方程解

本文去掉了R.Rossman方法中连梁连续化这一基本假定,给出了一种更符合实际的解法,该方法可以直接处理多肢墙,进而解决了R.Rossman方法中弯矩分配系数的确定问题。     

Finite difference scheme for large-deflection analysis of non-prismatic cantilever beams subjected to different types of continuous and discontinuous loadings

An efficient scheme, called quasi-linearization finite differences, is developed for large-deflection analysis of prismatic and non-prismatic slender cantilever beams subjected to various types of continuous and discontinuous external variable distributed and concentrated loads in horizontal and vertical global directions. Simultaneous equations of highly nonlinear and linear terms are obtained when casting the derived exact highly nonlinear governing differential equation using central finite differences on the nodes along the beam. A quasi-linearization scheme is used to solve these equations based on successive corrections of the nonlinear terms in the simultaneous equations. The nonlinear terms in the simultaneous equations are assumed constant during each correction (iteration). Several representative numerical examples of prismatic and non-prismatic slender cantilever beams with different loading conditions are analyzed to illustrate the merits of the adopted numerical scheme as well as its validity, accuracy and efficiency. The results of the present scheme are checked using large-displacement finite element analysis by the MSC/NASTRAN program. A comparison between the present secheme, MSC/NASTRAN and available results from the literature reveals excellent agreement. The advantage of the new scheme is that the load can be applied in one step with few iterations (3–6 iterations).     

单色光束的衍射度

受近期Gawhary和Severini在Opt.Lett.33,1360(2008)一文中引入的光束近轴度的启发,定义了一个独立于光束近轴度的衍射度参数来描述单色光束的衍射扩散程度,所定义的衍射度只依赖于光束的角谱分布,并可以定量比较不同光束的衍射扩散程度.     

用四台阶相位板产生涡旋光束

涡旋光束的产生与应用是当前光学领域的研究热点. 利用傅里叶级数展开法分析了四台阶相位板的相位结构, 发现四台阶相位板可看作是由一系列不同拓扑荷数的螺旋相位板所组成, 用线偏振光直接照射相位板时, 将产生多级衍射光波, 各级衍射光均为不同拓扑荷数的涡旋光波, 由于多级衍射光波间的干涉导致光强分布偏离轴对称分布, 因而与涡旋光波有一定差距. 在此基础上, 提出了用四台阶相位板产生涡旋光束的新方案, 借助于Mach-Zehnder 干涉仪光路, 两块四台阶相位板产生的衍射光干涉叠加, 通过调节干涉仪光路的相位差, 使一部分衍射级干涉相消, 另一部分衍射级干涉相长, 相互加强, 从而把线偏振光转换为涡旋光束. 数值模拟计算了几种周期数不同的四台阶相位板衍射光强和角动量分布, 并与螺旋相位板进行比较, 证明用简单的四台阶相位板不仅能够获得与用螺旋相位板相同的涡旋光束, 而且可以用周期数较小的四台阶相位板产生具有大拓扑荷数的涡旋光束, 降低了制作相位板的难度.