空化可压缩流动空穴溃灭激波特性研究

为深入研究空化可压缩流动中空泡/空泡团溃灭过程中激波产生、传播及其与空穴相互作用规律,本文采用数值模拟方法对空化可压缩流动空穴溃灭激波特性展开了研究.数值计算基于OpenFOAM开源程序,综合考虑蒸汽相和液相的压缩性,通过在原无相变两相可压缩求解器的控制方程中耦合模拟空化汽液相间质量交换的源项,实现了对空化流动的非定常可压缩计算.利用上述考虑汽/液相可压缩性的空化流动求解器,对周期性云状空化流动进行了数值模拟,并重点研究了空穴溃灭激波特性.结果表明:上述数值计算方法可以准确捕捉到空穴非定常演化过程及大尺度脱落空泡云团溃灭激波现象,大尺度脱落空泡云团溃灭过程分为3个阶段:(1) U型空泡团形成; (2) U型空泡团头部溃灭; (3) U型空泡团腿部溃灭.在U 型空泡团腿部溃灭瞬间,观察到激波产生,并向上游和下游传播,向上游传播的激波与空穴相互作用,导致水翼吸力面新生的附着型片状空穴回缩,直至完全溃灭.并且空穴溃灭激波存在回弹现象, 抑制了下一周期的空化发展.      

Displacement fields and self-energies of circular and polygonal dislocation loops in homogeneous and layered anisotropic solids

There are large classes of materials problems that involve the solutions of stress, displacement, and strain energy of dislocation loops in elastically anisotropic solids, including increasingly detailed investigations of the generation and evolution of irradiation induced defect clusters ranging in sizes from the micro- to meso-scopic length scales. Based on a two-dimensional Fourier transform and Stroh formalism that are ideal for homogeneous and layered anisotropic solids, we have developed robust and computationally efficient methods to calculate the displacement fields for circular and polygonal dislocation loops. Using the homogeneous nature of the Green tensor of order −1, we have shown that the displacement and stress fields of dislocation loops can be obtained by numerical quadrature of a line integral. In addition, it is shown that the sextuple integrals associated with the strain energy of loops can be represented by the product of a pre-factor containing elastic anisotropy effects and a universal term that is singular and equal to that for elastic isotropic case. Furthermore, we have found that the self-energy pre-factor of prismatic loops is identical to the effective modulus of normal contact, and the pre-factor of shear loops differs from the effective indentation modulus in shear by only a few percent. These results provide a convenient method for examining dislocation reaction energetic and efficient procedures for numerical computation of local displacements and stresses of dislocation loops, both of which play integral roles in quantitative defect analyses within combined experimental–theoretical investigations.     

运用系统动力学模型预测稀土战略储备规模

基于全球稀土资源的供需形势和中国稀土资源减少的趋势,运用系统动力学的模型来预测未来17年我国稀土资源储备量。选取了2000~2013的生产和消费数据,通过定量模拟计算中国稀土供需差波动系数,设计了稀土资源供需差波动范围分别为0%,20%的两个方案,模拟计算了两个方案的年储备量、累计储备量和储备量绝对值。方案一范围是(-0%,+0%),仿真预测出稀土未来17年累积储备量为720551 t,即战略储备规模达到720551 t,该方案下不论供需差发生如何波动,国家都会进行储备或释放调节;方案二范围是(-20%,+20%),预测出未来17年战略储备规模为461331 t,国家只需在这个范围外进行收储释放调节,从而调节市场供求,降低价格波动幅度。本文从不同供需差的波动系数来模拟计算储备量,目的是为国家相关部门在进行稀土储备决策时提供参考,可以根据我国经济景气状况和供需形势,以及稀土产业发展状况,进行不同规模的稀土储备。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定胡蜂酒中无机元素

采用电感耦合等离子体原子发射光谱法测定胡蜂酒中20种无机元素,建立无机元素对照指纹图谱,对重金属元素进行风险评估。结果表明,胡蜂酒中无机元素种类丰富,其中P、K、Na元素占测定总元素的96.14%。有害元素Pb、Cd、As、Hg、Cu含量符合国家药典标准要求,Cu的靶标危险系数(THQ)为1.00×10^-2,THQ<1说明摄入的重金属对人体健康造成的影响不明显。不同产区胡蜂酒金属元素含量存在差异,根据金属元素图谱得出元素含量按原子序数顺序出现相似的分布态势。结果表明,胡蜂酒中含有丰富的金属元素,很多为营养微量元素,有害元素(Pb、Cd、As、Hg、Cu)含量符合药典要求,从金属元素方面单一来看,饮用胡蜂酒没有明显的健康风险。胡蜂酒无机元素指纹图谱可为胡蜂酒的鉴别提供一定的的参考依据。     

呋喃基聚酯的结构与性能关系研究进展

呋喃基聚酯是指以2,5-呋喃二甲酸(FDCA)为主要单体合成的生物基或部分生物基高分子,其主链含有刚性的呋喃环,因而在结构、性能上与大规模使用的传统石油基芳香族聚酯(如PET、PBT)相似,有望在瓶、片、薄膜、化纤等领域部分替代后者。本文综述了呋喃基聚酯的分子结构、聚集态结构以及力学、气体阻隔、降解等性能方面的最新研究进展,讨论了结构与性能之间的关系。重点关注呋喃基聚酯突出的阻隔性能及其对应的影响因素,主要从分子结构(呋喃环的非对称性和极性)和聚集态结构(结晶等)两方面加以阐明。简介了呋喃基聚酯的发展现状及其在包装、纺织等领域的潜在应用,并展望其主要研究趋势。     

受限于两平行板间的对称星形共聚物Am Bm熔体相行为的格子自洽场理论研究

采用格子自洽场理论计算研究了受限于2个平行板间的对称星形共聚物AmBm(m=1,2,3,4,5)熔体形成的层状相结构.在给定的相互作用下(χNAB不变,χ为Flory-Huggins相互作用参数,NAB=(N?1)/m为单个聚合物分子中一对AB臂的总链节数目),针对平行板间距为体相周期的情况,系统考察了共聚物链长N和单个聚合物分子中A(或B)臂数目m对受限层结构细节及层取向的影响.由计算结果,当N或NAB不变时,受限层的归一化界面宽度随m的增大而减小.受限板为中性时,垂直层结构的单链自由能比平行层结构的低.随着板对共聚物中一种嵌段的选择作用Λ的增大,体系发生垂直层到平行层的转变,该转变为一阶相变.当m不变时,N越小,上述转变出现在越大的Λ值处,体系越容易保持垂直层结构.并且N越小,层状结构周期越小.当N或NAB不变时,m越大体系越容易保持垂直层结构.总之,星形共聚物的链长越短、臂数越多时,垂直层稳定的Λ区间越大、层状结构的界面宽度越小.这些结论可以指导刻蚀应用中对体系参数的选择.     

Learning about multiplication by comparing algorithms: “One times one,but actually they are ten times ten”

Multiplication algorithms in primary school are still frequently introduced with little attention to meaning. We present a case study focusing on a third grade class that engaged in comparing two algorithms and discussing “why they both work”. The objectives of the didactical intervention were to foster students' development of mathematical meanings concerning multiplication algorithms, and their development of an attitude to judge and compare the value and efficiency of different algorithms. Underlying hypotheses were that it is possible to promote the simultaneous unfolding of the semiotic potential of two algorithms, considered as cultural artifacts, with respect to the objectives of the didactical intervention, and to establish a fruitful synergy between the two algorithms. As results, this study sheds light onto the new theoretical construct of “bridging sign”, illuminating students’ meaning-making processes involving more than one artifact; and it provides important insight into the actual unfolding of the hypothesized potential of the algorithms.     

圆形刚性夹杂双周期分布的反平面问题

研究含双周期分布的圆形刚性夹杂在无穷远受纵向剪切的弹性平面问题，遵循复合材料中各夹杂相互影响的重要条件。采用复变函数方法。构造相应模型的复应力函数。通过坐标变换，同时满足夹杂边界位移条件，再利用围线积分将求争方程组化为线性代数方程组。导出了圆形刚性夹杂双周期分布的界面应力解析表达式。算例给出了界面应力最大值与夹杂间距的变化规律。求出了刚性夹杂的合理间距问题，本文发展的分析方法为研究夹杂材料的细观机理探索了一条有效的分析途径。     

Near-Boundary Stress Wave Field in Anisotropic Plates under Impulsive Load

The stress wave field and the behavior of waves near the free boundary in an orthotropic plate and at the interface between two anisotropic media are studied. The results presented were obtained using the dynamic photoelastic method and optically sensitive fibrous models. Experimental data for impulsively loaded plates with various boundary conditions are analyzed     

基于土拱效应的抗滑桩与护壁桩的桩间距分析

抗滑桩与护壁桩分别在滑坡治理和基坑支护中发挥着巨大的作用 ,其实施正是利用了土中的成拱效应 ,然而传统桩的设计虽考虑土拱效应的存在 ,但桩间距确定理论与方法并未建立起来。本文首先基于土体的极限平衡条件对滑坡推力作用下的土体中的成拱作用进行研究 ,得出了抗滑桩的最大桩间距公式 ,并以某一具体工程为例 ,对该最大桩间距的物理意义和可用性进行了讨论。在此基础上 ,给出了在考虑土拱效应的情况下合理桩间距的确定方法 ,并以此为据 ,对边坡加固设计提出一些建议.