A nonlinear model for marble sulphation including surface rugosity and mechanical damage

Here we propose and analyze a mathematical model that aims to describe the marble sulphation process occurring in a given material. The model accounts for rugosity as well as for damaging effects. This model is characterized by some technical difficulties that seem hard to overcome from a theoretical viewpoint. Therefore, we introduce some physically reasonable modifications in order to establish the existence of a suitable notion of solution on a given time interval. Numerical simulations are presented and discussed, also in view of further research.     

Assembling hydrodynamic cloaks to conceal complex objects from drag

Transformation hydrodynamics and the corresponding metamaterials have been proposed as a means to exclude the drag force acting on an object. Here, we report a strategy to deploy the hydrodynamic cloaks in a more practical manner by assembling different-shaped cloaking parts. Our strategy is to first model a square-shaped cloak and a carpet cloak and then combine them to conceal a more complex-shaped space in the three-dimensional hydrodynamic flow. With the derivation of transformation hydrodynamics, the coordinate transformations for each hydrodynamic cloaking are demonstrated with the calculated viscosity tensors. The pressure and velocity fields of the square, triangular (carpet), and exemplary three-dimensional house-shaped cloaks are numerically simulated, thus showing a cloaking effect and reduced drag. This study suggests an efficient way of cloaking complex architectures from fluid-dynamic forces.     

基于Nie-Tan算法的区间二型模糊集质心计算:改变主变量采样个数

计算区间二型模糊集的质心(也称降型)是区间二型模糊逻辑系统中的一个重要模块。Karnik-Mendel(KM)迭代算法通常被认为是计算区间二型模糊集质心的标准算法。尽管如此,KM算法涉及复杂的计算过程,不利于实时应用。在各种改进类算法中,非迭代的Nie-Tan(NT)算法可节省计算消耗。此外,连续版本NT(CNT,continuous version of NT)算法被证明是计算质心的准确算法。本文比较了离散版本NT算法中求和运算和连续版本NT算法中求积分运算,通过四个计算机仿真例子证实了当适度增加区间二型模糊集主变量采样个数时,NT算法的计算结果可以精确地逼近CNT算法。     

基于NICE-OHMS技术进行大气压气样直接检测的理论分析

噪声免疫腔增强光外差分子光谱技术(NICE-OHMS)是目前世界上最灵敏的激光吸收光谱技术,其在低压环境中具有极高的探测灵敏度。然而当测量样品处于大气压时,NICE-OHMS系统的探测灵敏度会大幅下降。主要原因之一是大气压下获取最大NICE-OHMS信号幅度的条件与低气压下不同。通过对大气压NICE-OHMS理论进行分析,分析了影响信号幅度的参数,并通过数值模拟来寻找最佳的实验条件。本文着重讨论影响信号的主要参数包括光学腔腔长L,调制系数β,探测相位θ。其中,由于在NICE-OHMS中使用DeVoe-Brewer技术将调制频率ν_m锁定到Fabry-Parot(FP)腔的自由光谱区(FSR)。因此FP腔的腔长决定了ν_m,同时还作用于信号幅度S■。模拟结果显示,当腔长增大时,由于ν_m随之减小,载波和边带的光谱成分相互重叠部分增大,因此线型函数的幅度逐渐减小。而吸收信号幅度随着腔长的增加而逐渐增加,色散信号幅度先增大后减小,并且在腔长等于8 cm时达到最大值。调制系数β会影响频率调制后激光载波和边带的幅度大小,并且影响信号线型。随着腔长的增加,最大信号幅度对应的β值也随之增加。在相同腔长下,色散信号的最佳β值小于吸收信号,更容易使用电光调制器实现。最后分析了参数的可实现性,分析了不同种类激光器的频率调谐能力,压电陶瓷的扫描宽度等。以乙炔气体为例,大气压下NICE-OHMS的谱线半宽达到~3 GHz,而光谱覆盖范围大于10 GHz。分布反馈式半导体激光器(DFB)与外腔二极管激光器(ECDL)的频率调谐范围可以达到30 GHz以上,但是由于激光线宽宽,得到的PDH锁定性能欠佳。回音壁模式激光器(WGM)和掺饵光纤激光器(EDFL)线宽为百Hz量级,是目前高灵敏NICE-OHMS系统中常用的光源。但是WGM目前可以实现了5 GHz的激光频率调谐范围,而EDFL的外部电压可控制的调谐范围仅为3 GHz。使用精细度为55000的腔进行模拟,调制系数β=1,腔长大于8 cm时,可使用WGM激光器实现,腔长大于25 cm时,可以使用EDFL激光器实现。而对于在设计光学腔中常用的伸缩长度为25μm的PZT,随着腔长的增加,对应的腔模频移范围逐渐减小,在腔长为典型的40 cm时,扫描范围大于12 GHz。     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.     

Optical analysis of polymer powder materials for Selective Laser Sintering

This study increases the basic understanding of optical material properties of polymer powders used in selective laser sintering (SLS). Therefore, different polymer powder materials were analyzed regarding their optical material properties with an integration spheres measurement setup. By the measurements a direct connection between the absorption behavior of the solid material and the overall optical material characteristics of the same material in powdery form could be shown. The results were used to develop an advanced explanation model for the optical material properties of powders. At present, existing explanation models only consider the occurring of multiple reflections in the gaps between the particles to explain the overall optical material properties of powder materials. Thus, by also considering the absorption behavior of the single particles, the basic understanding of the beam-matter interaction and their effect on the optical material properties of powder materials can be expanded.     

Time Discrete Approximation of Weak Solutions to Stochastic Equations of Geophysical Fluid Dynamics and Applications

As a first step towards the numerical analysis of the stochastic primitive equations of the atmosphere and the oceans,the time discretization of these equations by an implicit Euler scheme is studied.From the deterministic point of view,the 3D primitive equations are studied in their full form on a general domain and with physically realistic boundary conditions.From the probabilistic viewpoint,this paper deals with a wide class of nonlinear,state dependent,white noise forcings which may be interpreted in either the It6 or the Stratonovich sense.The proof of convergence of the Euler scheme,which is carried out within an abstract framework,covers the equations for the oceans,the atmosphere,the coupled oceanic-atmospheric system as well as other related geophysical equations.The authors obtain the existence of solutions which are weak in both the PDE and probabilistic sense,a result which is new by itself to the best of our knowledge.     

Controlled protein adsorption on a silica microparticle

In the present study, controlled protein adsorption on a rigid silica microparticle is investigated numerically using classical Langmuir and two-state models under electrokinetic flow conditions. The instantaneous particle locations are simulated along a straight microchannel using an arbitrary Lagrangian−Eulerian framework in the finite element method for the electrophoretic motion of the charged particle. Within the scope of the parametric study, the strength of the external electric field (E), particle diameter (D_p), the zeta potential of the particle (ζ_p), and the location of the microparticle away from the channel wall (H) are systematically varied. The results are also compared to the data of pressure-driven flow having a parabolic flow profile at the inlet whose maximum magnitude is set to the particle's electrophoretic velocity magnitude. The validation studies reveal that the code developed for the particle motion in the present simulations agrees well with the experimental results. It is observed that protein adsorption can be controlled using electrokinetic phenomena. The plug-like flow profile in electrokinetics is beneficial for a microparticle at every spatial location in the microchannel, whereas it is not valid for the pressure-driven flow. The electric field strength and the zeta potential of the particle accelerate the protein adsorption. The wall shear stress and shear rate are good indicators to predict the adsorption process for electrokinetic flow.     

Electrokinetic actuation of an uncharged polarizable dielectric droplet in charged hydrogel medium

Electrokinetic transport of an uncharged nonconducting microsized liquid droplet in a charged hydrogel medium is studied. Dielectric polarization of the liquid drop under the action of an externally imposed electric field induces a non-homogeneous charge density at the droplet surface. The interactions of the induced surface charge of the droplet with the immobile charges of the hydrogel medium generates an electric force to the droplet, which actuates the drop through the charged hydrogel medium. A numerical study based on the first principle of electrokinetics is adopted. Dependence of the droplet velocity on its dielectric permittivity, bulk ionic concentration, and immobile charge density of the gel is analyzed. The surface conduction is significant in presence of charged gel, which creates a concentration polarization. The impact of the counterion saturation in the Debye layer due to the dielectric decrement of the medium is addressed. The modified Nernst–Planck equation for ion transport and the Poisson equation for the electric field is considered to take into account the dielectric polarization. A quadrupolar vortex around the uncharged droplet is observed when the gel medium is considered to be uncharged, which is similar to the induced charge electroosmosis around an uncharged dielectric colloid in free-solution. We find that the induced charge electrokinetic mechanism creates a strong recirculation of liquid within the droplet and the translational velocity of the droplet strongly depends on its size for the dielectric droplet embedded in a charged gel medium.