Novel synthesis of sensor for selective detection of Fe+3 ions under various solvents

Naked-eye colored chemo dosimeter based on vanilline based conjugated sensor was synthesized and characterized. The main point of this paper is that the solvent also affects on selectivity of metals. Vanilline based conjugate sensor exhibited high selectivity and sensitivity for detection of Ferric ions (Fe⁺³) in all (both polar and nonpolar) solvents according to absorbance which can be observed by naked eye. The selectivity was more prominent in nonpolar or less polar solvent due to solubility factor of ions and sensor but not for polar. The detection of limit of the synthesized probes was shown up to 0.84 ppm. The dielectric constant of solvents affected on the complex formation of ligand with transition metal ions. A filter paper strip system was used for rapid monitoring of detection by color variation.     

γ-Valerolactone (GVL) as a green and efficient dipolar aprotic reaction medium

The great challenge for modern research is to define the most efficient tools to make more sustainable the industrial production and manufacturing. Among the different aspects that require attention the replacement of toxic and/or non-renewable solvents it is certainly playing a crucial role. Dealing with widely used dipolar aprotic solvents, among the different alternatives proposed in the literature γ-valerolactone (GVL) plays a pivotal role covering different application area. In this contribution, the benefits derived from the use of GVL as a circular, safe, biomass-derived reaction medium are highlighted covering most recent publications (2021). The presentation has been divided into three major sections: (i) biomass valorization, (ii) materials synthesis, manufacturing and recycle and (iii) new synthetic methodologies.     

Design,synthesis and evaluation of novel dehydroabietic acid-dithiocarbamate hybrids as potential multi-targeted compounds for tumor cytotoxicity

In the present study, novel representatives of the important group of biologically-active, dehydroabietic acid-bearing dithiocarbamate moiety, were synthesized and characterized by ¹H NMR, ¹³C NMR, HR-MS. The in vitro antiproliferative activity evaluation (MTT) indicated that these compounds exhibited potent inhibitory activities in various cancer cell lines (HepG-2, MCF-7, HeLa, T-24, MGC-803). Particularly, compound III-b possessed extraordinary cytotoxicity with low micromolar IC₅₀ values ranging from 4.07 to 38.84 µM against tested cancer cell lines, while displayed weak cytotoxicity on two normal cell lines (LO-2 and HEK 293 T). Subsequently, the potential mechanisms of representative compound III-b were elementarily investigated by Transwell experiment, which showed III-b can inhibit cancer cells migration. Annexin-V/PI dual staining showed that the compound can induce HepG-2 cells apoptosis in a dose-dependent manner. Meanwhile this apoptosis may be related to the upregulated protein expression of cleaved-caspase 3, cleaved-caspase 9, Bax and downregulated of Bcl-2 indicated by Western Blot. Later study further confirmed that ROS levels in HepG-2 cells increased significantly with the rise of concentrations. In addition, through the network pharmacology data analyzing, the core targets and signaling pathways of compound III-b for treatment of liver neoplasms were forecasted. Molecular docking model showed that compound III-b had high affinity with hub targets (CASP3, EGFR, HSP90AA1, MAPK1, ERBB2, MDM2), suggesting that compound III-b might target the hub protein to modulate signaling activity. Taken together, these data indicated that dehydroabietic acid structural modification following the “Molecular hybridization” principle is a feasible way to discover the potential multi-targeted antitumor compounds.     

Synthesis and properties of novel N,C,N terdentate skeleton based on 1,3-di(pyridin-2-yl)benzene moiety-new tricks for old dogs

Utilization of intermolecular Friedel-Crafts and intramolecular condensation reaction,novel 1,3-di-(pyridine-2-yl)benzene(N,C,N terdentate) skeleton with electro-withdrawing group in 6' position of pyridyl and a cyclization between 6' position of pyridyl and 6 position of benzyl ring were firstly designed and synthesized.The structures of these novel N,C,N terdentate were confirmed by NMR,MS and X-ray single crystalanalyses.The photophysical properties of these compounds were briefly explored.     

On-Surface Synthesis of One-Dimensional Carbon-Based Nanostructures via C−X and C−H Activation Reactions

The past decades have witnessed the emergence of low-dimensional carbon-based nanostructures owing to their unique properties and various subsequent applications. It is of fundamental importance to explore ways to achieve atomically precise fabrication of these interesting structures. The newly developed on-surface synthesis approach provides an efficient strategy for this challenging issue, demonstrating the potential of atomically precise preparation of low-dimensional nanostructures. Up to now, the formation of various surface nanostructures, especially carbon-based ones, such as graphene nanoribbons (GNRs), kinds of organic (organometallic) chains and films, have been achieved via on-surface synthesis strategy, in which in-depth understanding of the reaction mechanism has also been explored. This review article will provide a general overview on the formation of one-dimensional carbon-based nanostructures via on-surface synthesis method. In this review, only a part of the on-surface chemical reactions (specifically, C−X (X=Cl, Br, I) and C−H activation reactions) under ultra-high vacuum conditions will be covered.     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Facile synthesis of 2-carboxanilido-3-arylquinazolin-4-ones from N1-(2-carboxyphenyl)-N2-(aryl)oxalamides

A simple and efficient approach for the synthesis of novel 2-carboxanilido-3-arylquinazolin-4-ones via the one-pot condensation of readily available N¹-(2-carboxyphenyl)-N²-(aryl)oxalamides with various aromatic amines is described. Notably, this methodology allows us to synthesize 3-aryl-quinazolin-4-ones using aromatic amines with various substituents, both electron-donating and electron-withdrawing, which ensures structural diversity of the products and an atomic-economic process.     

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

Constructing a reliable and favorable electrode-electrolyte interface is crucial to utilize the exceptional energy storage capability in commercial lithium-ion batteries. Here, we report a facile synthesis approach for the lithium difluorophosphate (LiPO₂F₂) solution as an effective film-forming additive via direct adding the Li₂CO₃ into LiPF₆ solution at 45 °C. Benefiting from the significantly reduced interface resistance (R_SEI) and charge transfer impedance (R_ct) of both the cathode and anode by adding the prepared LiPO₂F₂ solution into a baseline electrolyte, the cycling performance of the graphite||LiNi_0.5Mn_0.3Co_0.2O₂ pouch cell is remarkably improved under all-climate condition.     

K6In2Q6 (Q = S,Se, Te): Missing Links in the Series of Alkali Chalcogenido Ditrielates(III)

The chalcogenido indates K₆In₂Q₆ (Q = S, Se, Te) were synthesized from melts of the pure elements at a maximum temperature of 700 °C. All three potassium salts contain dinuclear units [In₂Q₆]^6– of two edge-sharing [InQ₄] tetrahedra. The sulfido and the selenido indate are isotypic and crystallize in the K₆Mn₂O₆-type structure [monoclinic, space group P2₁/c, a = 784.32(9)/809.32(3), b = 1274.58(14)/1322.37(4), c = 836.48(9)/870.53(3) pm, β = 97.900(2)/97.5877(8)°, Z = 2, R₁ = 0.0123/0.0109; for Q = S/Se]. The tellurido indate K₆In₂Te₆ crystallizes in a new orthorhombic structure type [space group Pnma, a = 1793.70(12), b = 1491.55(11), c = 837.40(6) pm, Z = 4, R₁ = 0.0157]. In this structure, the telluride anions form a hexagonal close packing, in which K⁺ cations occupy all octahedral voids; the In³⁺ ions take 1/6 (but always adjacent) tetrahedral voids. This structure-chemical relation to the h.c.p. packing, which is similarly found for most of the sodium dimetallates (e.g. Na₆Fe₂S₆), is substantiated by a full crystallographic group-subgroup tree. The crystal chemistry of the new indates is discussed and compared with that of alkali chalcogenido metallates(III) of Fe, Al and Ga containing [M₂Q₆]^6– dimers, which overall form as many as ten different structure types. DFT band structure calculations of the three title compounds exhibit bandgaps, which continuously decrease from the S to the Te compound and which are also in accordance with the pale yellow (S), bright yellow (Se) and red-brown (Te) color of the compounds. The chemical bonding in the salts and within the metallate anion is discussed on the basis of the partial DOS and a Bader analysis of the calculated electron density.