Key Role of a-Top CO on Terrace Sites of Metallic Pd Clusters for CO Oxidation

Pd-based catalysts are the most widely used for CO oxidation because of their outstanding catalytic activity and thermal stability. However, fundamental understanding of the detailed catalytic processes occurring on Pd-based catalysts under realistic conditions is still lacking. In this study, we investigated CO oxidation on metallic Pd clusters supported on Al₂O₃ and SiO₂. High-angle annular dark-field scanning transmission electron microscopy revealed the formation of similar-sized Pd clusters on Al₂O₃ and SiO₂. In contrast, CO chemisorption analysis indicated a gradual change in the dispersion of Pd (from 0.79 to 0.2) on Pd/Al₂O₃ and a marginal change in the dispersion (from 0.4 to 0.24) on Pd/SiO₂ as the Pd loading increased from 0.27 to 5.5 wt %; these changes were attributed to differences in the metal-support interactions. Diffuse reflectance infrared Fourier-transform spectroscopy revealed that fewer a-top CO species were present in Pd supported on Al₂O₃ than those in Pd supported on SiO₂, which is related to the morphological differences in the metallic Pd clusters on these two supports. Despite the different dispersion profiles and surface characteristics of Pd, O₂ titration demonstrated that linearly bound CO (with an infrared signal at 2090 cm⁻¹) reacted first with oxygen in the case of CO-saturated Pd on Al₂O₃ and SiO₂, which suggests that a-top CO on the terrace site plays an important role in CO oxidation. The experimental observations were corroborated by periodic density functional calculations, which confirmed that CO oxidation on the (111) terrace sites is most plausible, both kinetically and thermodynamically, compared to that on the edge or corner sites. This study will deepen the fundamental understanding of the effect of Pd clusters on CO oxidation under reaction conditions.     

Single-atom Fe Embedded Co3S4 for Efficient Electrocatalytic Oxygen Evolution Reaction

Constructing atomically dispersed active sites with densely exposed and dispersed double metal-S_x catalytic sites for favorable OER catalytic activity remains rare and challenging. Herein, we design and construct a Fe₁S_x@Co₃S₄ electrocatalyst with Fe single atoms epitaxially confined in Co₃S₄ nanosheets for catalyzing the sluggish alkaline oxygen evolution reaction(OER). Consequently, in ultralow concentration alkaline solutions(0.1 mol/L KOH), such a catalyst is highly active and robust for OER with low overpotentials of 300 and 333 mV at current densities of 10 and 30 mA/cm², respectively, accompanying long-term stability without significant degradation even for 350 h. In addition, Fe₁S_x@Co₃S₄ shows a turnover frequency(TOF) value of 0.18 s⁻¹, nearly three times that of Co₃S₄(0.07 s⁻¹), suggesting the higher atomic utilization of Fe single atoms. Mössbauer and in-situ Raman spectra confirm that the OER activity of Fe₁S_x@Co₃S₄ origins from a thin catalytic layer of Co(Fe)OOH that interacts with trace-level Fe species in the electrolyte, creating dynamically stable active sites. Combined with experimental characterizations, it suggests that the most active S-coordinated dual-metal site configurations are 2S-bridged (Fe-Co)S₄, in which Co-S and Fe-S moieties are shared with two S atoms, which can strongly regulate the adsorption energy of reaction intermediates, accelerating the OER reaction kinetics.     

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Acidity plays a vital role in methane conversion by co-feeding method, which is one of the best strategies to improve the utilization and gentle the reaction conditions of methane. In this work, Zn, Ni, Mo, La, Ga, Fe and Co-impregnated ZSM-5 zeolites have been prepared with the same substitutions to variate the acidities and tested in co-aromatization of methanol with methane. It is demonstrated that the new medium-strong acid sites formed by metal and strong acid sites are the key role to activate methane in co-reaction. Zn-modified ZSM-5 catalyst is preferred to exhibit the best methane conversion of 12%, whose aromatic selectivity increases from 27.2% to 52.2% compared with that of HZSM-5. Besides, the addition of methane further improves the production of high-valued aromatics compared with methanol to aromatics (MTA) reaction.     

Study of Endogen Substrates,Drug Substrates and Inhibitors Binding Conformations on MRP4 and Its Variants by Molecular Docking and Molecular Dynamics

Multidrug resistance protein-4 (MRP4) belongs to the ABC transporter superfamily and promotes the transport of xenobiotics including drugs. A non-synonymous single nucleotide polymorphisms (nsSNPs) in the ABCC4 gene can promote changes in the structure and function of MRP4. In this work, the interaction of certain endogen substrates, drug substrates, and inhibitors with wild type-MRP4 (WT-MRP4) and its variants G187W and Y556C were studied to determine differences in the intermolecular interactions and affinity related to SNPs using protein threading modeling, molecular docking, all-atom, coarse grained, and umbrella sampling molecular dynamics simulations (AA-MDS and CG-MDS, respectively). The results showed that the three MRP4 structures had significantly different conformations at given sites, leading to differences in the docking scores (DS) and binding sites of three different groups of molecules. Folic acid (FA) had the highest variation in DS on G187W concerning WT-MRP4. WT-MRP4, G187W, Y556C, and FA had different conformations through 25 ns AA-MD. Umbrella sampling simulations indicated that the Y556C-FA complex was the most stable one with or without ATP. In Y556C, the cyclic adenosine monophosphate (cAMP) and ceefourin-1 binding sites are located out of the entrance of the inner cavity, which suggests that both cAMP and ceefourin-1 may not be transported. The binding site for cAMP and ceefourin-1 is quite similar and the affinity (binding energy) of ceefourin-1 to WT-MRP4, G187W, and Y556C is greater than the affinity of cAMP, which may suggest that ceefourin-1 works as a competitive inhibitor. In conclusion, the nsSNPs G187W and Y556C lead to changes in protein conformation, which modifies the ligand binding site, DS, and binding energy.     

Visible-Light-Induced Heptacene Generation under Ambient Conditions: Utilization of Single-crystal Interior as an Isolated Reaction Site

The photo-induced generation of unstable molecules generally requires stringent conditions to prevent oxidation and the concomitant decomposition of the products. The visible-light-induced conversion of two heptacene precursors to heptacene was studied. Single crystals of bis- and mono-α-diketone-type heptacene precursors ( 7-DK2 and 7-DK1 , respectively), were prepared to investigate the effect of precursor structure on reactivity. The photoirradiation of a 7-DK2 single crystal cleaved only one α-diketone group, forming an intermediate bearing a pentacene subunit, while that of a 7-DK1 single crystal gave rise to characteristic absorption peaks of heptacene and their increase in intensity with photoirradiation time, indicating the generation of heptacene without decomposition. Heptacene production was not observed when the precursors were photoirradiated in solution, implying that the single crystal interior provided isolation from the external environment, thus preventing heptacene oxidation.     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

Systematic investigation of sequence and structural motifs that recognize ATP

Interaction between ATP, a multifunctional and ubiquitous nucleotide, and proteins initializes phosphorylation, polypeptide synthesis and ATP hydrolysis which supplies energy for metabolism. However, current knowledge concerning the mechanisms through which ATP is recognized by proteins is incomplete, scattered, and inaccurate. We systemically investigate sequence and structural motifs of proteins that recognize ATP. We identified three novel motifs and refined the known p-loop and class II aminoacyl-tRNA synthetase motifs. The five motifs define five distinct ATP–protein interaction modes which concern over 5% of known protein structures. We demonstrate that although these motifs share a common GXG tripeptide they recognize ATP through different functional groups. The p-loop motif recognizes ATP through phosphates, class II aminoacyl-tRNA synthetase motif targets adenosine and the other three motifs recognize both phosphates and adenosine. We show that some motifs are shared by different enzyme types. Statistical tests demonstrate that the five sequence motifs are significantly associated with the nucleotide binding proteins. Large-scale test on PDB reveals that about 98% of proteins that include one of the structural motifs are confirmed to bind ATP.