Experimental and numerical simulation of effects of CO2/N2 concentration and initial temperature on combustion characteristics of biomass syngas

Biomass syngas is a form of renewable energy with very broad application prospects, and it has different combustion characteristics according to the fuel composition and processing technology of biomass syngas. The influence of combustion composition, diluent and temperature variation on combustion characteristics were studied in this paper. The FFCM-1 mechanism was used to investigate the combustion characteristics of CO/CH₄/H₂ under varied diluents CO₂/N₂ and temperature by using spherical expansion flame method and ANSYS CHEMKIN-PRO. The experimental laminar burning velocity was compared with the simulation results of FFCM-1 mechanism. The results reveal that the experimental data are in good agreement with the simulation results, which are somewhat different under the condition of rich fuel. The laminar burning velocity decreases significantly with the increase of diluent CO₂/N₂, with the effect of diluent CO₂ being more significant. The laminar burning velocity increase dramatically with the increase of initial temperature, and the adiabatic flame temperature also decreases with the increase of diluent. The reduction caused by diluent CO₂ is much larger than that caused by diluent N₂. The change of initial temperature also affects the adiabatic flame temperature, but the range of variation is not as pronounced as that of diluent. Not only was the interaction between the combustion characteristics of CO/CH₄/H₂ under different diluents and temperature changes explored in this paper, but the influence mechanism was also revealed in depth.     

3d过渡金属掺杂M_2@Si_(20)(M=Sc-Zn)团簇的密度泛函理论研究

利用密度泛函理论(DFT)研究3d过渡金属掺杂硅团簇的几何结构和稳定性,计算了绝热电子亲和能和垂直电离能,内嵌双金属间距,自旋磁矩等.结果表明内嵌的Sc、Ti、V、Mn金属二聚体和十二面体硅笼构成了稳定的富勒烯结构,随着d电子数目的增加其内嵌的富勒烯构型有部分畸变,总体而言Si_(20)团簇掺杂双金属后稳定性得到了提高.     

Invariant discrete flows

In this paper, we investigate the evolution of joint invariants under invariant geometric flows using the theory of equivariant moving frames and the induced invariant discrete variational complex. For certain arc length preserving planar curve flows invariant under the special Euclidean group , the special linear group , and the semidirect group , we find that the induced evolution of the discrete curvature satisfies the differential‐difference mKdV, KdV, and Burgers' equations, respectively. These three equations are completely integrable, and we show that a recursion operator can be constructed by precomposing the characteristic operator of the curvature by a certain invariant difference operator. Finally, we derive the constraint for the integrability of the discrete curvature evolution to lift to the evolution of the discrete curve itself.     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先，利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。     

A fast iterative method to find the matrix geometric mean of two HPD matrices

The purpose of this research is to present a novel scheme based on a quick iterative scheme for calculating the matrix geometric mean of two Hermitian positive definite (HPD) matrices. To do this, an iterative scheme with global convergence is constructed for the sign function using a novel three‐step root‐solver. It is proved that the new scheme is convergent and shown to have global convergence behavior for this target, when square matrices having no pure imaginary eigenvalues. Next, the constructed scheme is used and extended through a well‐known identity for the calculation of the matrix geometric mean of two HPD matrices. Ultimately, several experiments are collected to show its usefulness.     

On Current Developments in Partial Differential Equations

The first part of this article is an overview on some recent major developments in the field of analysis and partial different equations.It is a brief presentation given by the author at a round table discussion.The second part is a supplement of various details provided by several outstanding researchers on subjects.     

Mean curvature flow with free boundary – Type 2 singularities

In this paper we give sufficient conditions that guarantee the mean curvature flow with free boundary on a pinched cylinder develops a Type 2 curvature singularity. We additionally prove that Type 0 singularities may only occur at infinity.