Surface Tension Effect on Harmonics of Rayleigh-Taylor Instability

Using the method of the parameter expansion up to the third order, explicitly investigates surface tension effect on harmonics at weakly nonlinear stage in Rayleigh-Taylor instability (RTI) for arbitrary Atwood numbers and compares the results with those of classical RTI within the framework of the third-order weakly nonlinear theory. It is found that surface tension strongly reduces the linear growth rate of time, resulting in mild growth of the amplitude of the fundamental mode, and changes amplitudes of the second and third harmonics, as is expressed as a tension factor coupling in amplitudes of the harmonics. On the one hand, surface tension can either decrease or increase the space amplitude; on the other hand, surface tension can also change their phases for some conditions which are explicitly determined.     

The Enhanced Second‐Harmonic Generation Based on Magnetic‐Lorentz‐Force Effect

Electromagnetic coupling generates a second‐harmonic signal via the magnetic component of Lorentz force of free electrons. In this work, the enhancement of artificial second‐harmonic generation (SHG) from plasmonic metamaterial with near‐field electromagnetic coupling is theoretically investigated by performing numerical simulations in both frequency and time domains. Simulation results demonstrate that a small gap between the near‐field electric dipole and magnetic resonators could increase the electromagnetic coupling and the SHG signal. In addition, the longer the near‐field electric dipole resonator, the stronger the SHG signal emits. By tuning the geometrical parameters, it has been verified that near‐field electromagnetic coupling results in enhancement of magnetic resonance, thereby improving the SHG signal by more than 3.4 times. This research paves a way toward the design of artificial nonlinearity with metamaterials.     

Self‐focusing of a cosh‐Gaussian laser beam in magnetized plasma under relativistic‐ponderomotive regime

The combined effect of relativistic and ponderomotive nonlinearities on the self‐focusing of an intense cosh‐Gaussian laser beam (CGLB) in magnetized plasma have been investigated. Higher‐order paraxial‐ray approximation has been used to set up the self‐focusing equations, where higher‐order terms in the expansion of the dielectric function and the eikonal are taken into account. The effects of various lasers and plasma parameters viz. laser intensity (a₀), decentred parameter (b), and magnetic field (ω_c) on the self‐focusing of CGLB have been explored. The results are compared with the Gaussian profile of laser beams and relativistic nonlinearity. Self‐focusing can be enhanced by optimizing and selecting the appropriate laser‐plasma parameters. It is observed that the focusing of CGLB is fast in a nonparaxial region in comparison with that of a Gaussian laser beam and in a paraxial region in magnetized plasma. In addition, strong self‐focusing of CGLB is observed at higher values of a₀, b, and ω_c. Numerical results show that CGLB can produce ultrahigh laser irradiance over distances much greater than the Rayleigh length, which can be used for various applications.     

Nonexistence of global solutions of wave equations with weak time-dependent damping and combined nonlinearity

In our previous two works, we studied the blow-up and lifespan estimates for damped wave equations with a power nonlinearity of the solution or its derivative, with scattering damping independently. In this work, we are devoted to establishing a similar result for a combined nonlinearity. Comparing to the result of wave equation without damping, one can say that the scattering damping has no influence.     

基于S-R和分解定理的三维几何非线性无网格法

S-R(strain-rotation)和分解定理克服了经典有限变形理论的一些缺点, 使其可以为几何非线性数值分析提供可靠的理论基础. 对于大变形问题, 由于无网格法(element-free method)避免了对单元网格的依赖, 从而从根本上避免了有限单元法(finite element method, FEM)的单元畸变问题, 保证了求解精度. 因此, 将无网格法和S-R和分解定理结合起来势必能建立一套更加合理可靠的几何非线性数值计算方法. 目前基于S-R 定理的无网格数值方法研究较少并且只能用于二维平面问题的求解, 但实际上绝大多数问题都必须以三维模型来进行处理, 因此建立适用于三维情况的S-R无网格法是非常有必要的. 本文给出了适用于三维情况的S-R 无网格法: 采用由更新拖带坐标法和势能率原理推导出来的增量变分方程, 利用基于全局弱式的无网格Galerkin 法(EFG)得到了用于求解三维空间问题的离散格式. 利用MATLAB编制三维S-R 无网格法程序, 对受均布载荷的三维悬臂梁和四边简支矩形板结构的非线性弯曲问题进行了计算. 最后将所得的数值结果与已有文献进行了比较, 验证了本文的三维S-R无网格数值算法的合理性、有效性和准确性. 本文的三维S-R无网格数值算法可以作为一种可靠的三维几何非线性数值分析方法.      

Initial boundary value problem for a class of strongly damped semilinear wave equations with logarithmic nonlinearity

This paper deals with the initial boundary value problem for strongly damped semilinear wave equations with logarithmic nonlinearity $u_{tt}-\Delta u-\Delta u_t={\phi }_p\left(u\right)log\left|u\right|$ in a bounded domain $\Omega \subset {\mathbb{R}}^n$. We discuss the existence, uniqueness and polynomial or exponential energy decay estimates of global weak solutions under some appropriate conditions. Moreover, we derive the finite time blow up results of weak solutions, and give the lower and upper bounds for blow-up time by the combination of the concavity method, perturbation energy method and differential–integral inequality technique.     

平面波输入下海水-海床-结构动力相互作用分析

海洋工程结构的地震反应分析是保证海洋工程结构地震安全的重要环节.由于其所处的复杂环境, 该问题涉及到流固耦合和土-结相互作用.本文基于海水、饱和海床、基岩流固耦合统一计算框架,采用Davidenkov模型和修正的Masing准则考虑饱和海床的非线性,在脉冲SV波垂直入射下, 进行了海域场地和海洋工程结构的动力响应分析. 首先,对比分析了线性自由场和非线性自由场输入情形的海域场地非线性反应,结果表明线性自由场输入时反应不合理,自由场分析和场地分析应该采用相一致的本构模型. 然后,对比分析了海床分别为线性和非线性情形时,海域场地以及海水-海床-结构体系的反应特征. 与线性海床情形相比,非线性对海床反应的影响主要由如下两方面因素控制: 一方面,非线性导致饱和海床模量减小, 饱和海床与基岩间的波阻抗比减小,由基岩到饱和海床间的反射系数和透射系数增加, 导致反应增大; 另一方面,非线性导致阻尼加大, 使海床反应减小. 对于本文算例而言,阻尼对非线性海床结果的影响占主导作用.      

Defects related emission and nanosecond optical power limiting in CuS quantum dots

We report optical and nonlinear optical properties of CuS quantum dots and nanoparticles prepared through a nontoxic, green, one-pot synthesis method. The presence of surface states and defects in the quantum dots are evident from the luminescent behavior and enhanced nonlinear optical properties measured using the open aperture Z-scan, employing 5 ns laser pulses at 532 nm. The quantum dots exhibit large effective third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 2.3 J cm⁻², and the optical nonlinearity arises largely from absorption saturation and excited state absorption. Results suggest that these materials are potential candidates for designing efficient optical limiters with applications in laser safety devices.