Interfacial stresses in curved members bonded with a thin plate

The use of steel plates or externally bonded fibre-reinforced polymer laminates for flexural strengthening of concrete, masonry, timber or metallic structures is a technique that has become very popular. The effectiveness of this technique hinges heavily on the performance of the bond between the strengthening plate and the substrate, which has been the subject of many existing studies. In particular, the interfacial stresses between a beam and a soffit plate within the linear elastic range have been addressed by numerous analytical investigations. Surprisingly, none of these investigations has examined interfacial stresses in members with a curved soffit, despite that such members are often found in practice. This paper presents an analytical model for the interfacial stresses between a curved member of uniform section size and a thin plate bonded to its soffit. The governing differential equations for the interfacial shear and normal stresses are formulated and then solved with appropriate simplifying assumptions. Two numerical examples are presented to illustrate the effect of the curvature of the member on the interfacial stress distributions in a simply supported curved beam for the two cases of a point load and a uniformly distributed load. The analytical solution is verified by comparing its predictions with those from a finite element model.     

光纤传感器测量FRP加固结构的损伤

A distributed fiber optic sensor is developed for condition monitoring of civil infrastructure sys-tems. The fiber optic sensor is especially useful in applications involving structures strengthened by fiberreinforced polymer (FRP) composites. The sensor principles are simple and therefore, practical for detec-tion of cracks, debonding and deformation measurements. Structural monitoring capability of the sensor     

杂交梁界面剪应力的理论分析和数值模拟

采用解析和数值方法研究FRP-混凝土杂交梁的界面应力问题。提出了杂交梁的新的力学模型和假设,克服了以往的分析模型中界面应力表达式非常复杂和界面应力的解析解与数值解相差较大的缺点,本文得到的FRP板加固梁的界面剪应力表达式与数值结果符合很好,并且具有简捷的表达式。利用有限元法研究了杂交梁各物理参数对界面剪应力的影响。研究表明,界面剪应力在FRP板的端部存在应力集中或应力奇性,这是造成杂交梁界面破坏的主要原因。这项研究对进行杂交结构的工程设计具有理论指导和参考价值。     

FRP加固梁的FRP-混凝土界面脱胶分析

为了研究纤维增强聚合物(fiber reinforced polymer, FRP) 加固梁的FRP-混凝土界面脱胶破坏过程,本文将混凝土梁和FRP 板均视为线弹性的欧拉-伯努利梁(Euler-Bernoulli beams), 且两者通过粘结层胶结在一起. 对于FRP-混凝土结构,有两种形式的脱胶破坏：板端脱胶破坏和跨中裂缝导致的脱胶破坏.对于FRP-混凝土梁,利用合理的粘结模型按第2 种脱胶失效形式,详细讨论了FRP-混凝土界面的脱胶过程,得到了不同阶段的胶结滑移、界面剪应力和FRP 轴向力的解析解. 实验研究验证了理论分析的结果,参数研究进一步探讨了胶结长度和粘结层厚度对于FRP-混凝土界面脱胶行为的影响.     

FRP筋粘结式锚具的界面径向弹性模量分析

建立了FRP(Fibre Reinforced Polymer)筋粘结式锚具粘结界面的Rib-scale模型和Bar-scale模型,然后利用Fourier-Bessel级数推导了FRP筋、混凝土以及钢套筒等在径向应力作用下的解析解.解析解与数值解吻合较好,验证了用Fourier-Bessel级数表达的解析解的有效性....     

Cohesive fracture simulation and failure modes of FRP–concrete bonded interfaces

A work-of-fracture method using three-point bend beam (3PBB) specimen, commonly employed to determine the fracture energy of concrete, is adapted to evaluate the mode-I cohesive fracture of fiber reinforced plastic (FRP) composite–concrete adhesively bonded interfaces. In this study, a bilinear damage cohesive zone model (CZM) is used to simulate cohesive fracture of FRP–concrete bonded interfaces. The interface cohesive process damage model is proposed to simulate the adhesive–concrete interface debonding; while a tensile plastic damage model is used to account for the cohesive cracking of concrete near the bond line. The influences of the important interface parameters, such as the interface cohesive strength, concrete tensile strength, critical interface energy, and concrete fracture energy, on the interface failure modes and load-carrying capacity are discussed in detail through a numerical finite element parametric study. The results of numerical simulations indicate that there is a transition of the failure modes controlling the interface fracture process. Three failure modes in the mode-I fracture of FRP–concrete interface bond are identified: (1) complete adhesive–concrete interface debonding (a weak bond), (2) complete concrete cohesive cracking near the bond line (a strong bond), and (3) a combined failure of interface debonding and concrete cohesive cracking. With the change of interface parameters, the transition of failure modes from interface debonding to concrete cohesive cracking is captured, and such a transition cannot be revealed by using a conventional fracture mechanics-based approach, in which only an energy criterion for fracture is employed. The proposed cohesive damage models for the interface and concrete combined with the numerical finite element simulation can be used to analyze the interface fracture process, predict the load-carrying capacity and ductility, and optimize the interface design, and they can further shed new light on the interface failure modes and transition mechanism which emulate the practical application.     

大型玻璃钢渔船帽型骨架剖面参数的力学分析

本文对大型玻璃渔船帽型架剖面参数,进行了在不受力情况下正交各向异性玻璃钢薄板稳定的力学分析,建立架受力分析－受压区的矩形薄板压缩稳定和腹板的矩形薄板剪切稳定两种力学模型,解得这两种力学模型,在两种材料（１：１玻璃钢和４：１玻璃铡）与两种边界件（四边简支和四边固支）组合的四种条件下,骨架剖面参数的ｂ／ｔ１和ｈ／ｔ的取值范围,它们依次为１０．０～２６．２和２８．７～４４．２。文中分析结果为帽型骨架剖面     

Moment redistribution in continuous reinforced concrete beams strengthened with carbon-fiber-reinforced polymer laminates

The results of tests on continuous steel-fiber-reinforced concrete (RC) beams, with and without an external strengthening, are presented. The internal flexural steel reinforcement was designed so that to allow steel yielding before the collapse of the beams. To prevent the shear failure, steel stirrups were used. The tests also included two nonstrengthened control beams; the other specimens were strengthened with different configurations of externally bonded carbon-fiber-reinforced polymer (CFRP) laminates. In order to prevent the premature failure from delamination of the CFRP strengthening, a wrapping was also applied. The experimental results obtained show that it is possible to achieve a sufficient degree of moment redistribution if the strengthening configuration is chosen properly, confirming the results provided by two simple numerical models. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 5, pp. 667–686, September–October, 2007.     

Anchorage strength models for end-debonding predictions in RC beams strengthened with FRP composites

The increase in the flexural capacity of RC beams obtained by externally bonding FRP composites to their tension side is often limited by the premature and brittle debonding of the external reinforcement. An in-depth understanding of this complex failure mechanism, however, has not yet been achieved. With specific regard to end-debonding failure modes, extensive experimental observations reported in the literature highlight the important distinction, often neglected in strength models proposed by researchers, between the peel-off and rip-off end-debonding types of failure. The peel-off failure is generally characterized by a failure plane located within the first few millimetres of the concrete cover, whilst the rip-off failure penetrates deeper into the concrete cover and propagates along the tensile steel reinforcement. A new rip-off strength model is described in this paper. The model proposed is based on the Chen and Teng peel-off model and relies upon additional theoretical considerations. The influence of the amount of the internal tensile steel reinforcement and the effective anchorage length of FRP are considered and discussed. The validity of the new model is analyzed further through comparisons with test results, findings of a numerical investigation, and a parametric study. The new rip-off strength model is assessed against a database comprising results from 62 beams tested by various researchers and is shown to yield less conservative results. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 373–388, May–June, 2008.     

Square and rectangular concrete columns confined by CFRP: Experimental and numerical investigation

The results of an experimental and theoretical investigation into the deformation behavior of CFRP-confined square and rectangular concrete columns under axial loads are presented. Three types of columns are considered: unwrapped; fully wrapped; and fully wrapped, with L-slaped steel angles placed at the corners. A mechanical deformation model for them is proposed, which is based on a nonuniform distribution of the stresses caused by the confining device. The results given by the model are in a good agreement with the experimental results obtained. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 417–442, May–June, 2008.